SONY Bravia 9 II XR95M2 Review

Contrary to expectations and high hopes, the Bravia 9 II we tested straight out of the box showed some issues with its factory calibration. Looking at the white balance charts, you can see it isn’t perfect. In SDR content it mainly lacked the red component, so the picture leaned toward cooler, bluish tones. By contrast, white balance in HDR looked much better in that respect. So where do the visible errors in image reproduction come from? They stem from an unexpected tuning of the gamma and the EOTF curve. In both cases the Bravia 9 II straight from the factory showed a clear deviation from reference standards.

In SDR content the gamma was significantly too high, at times running very close to 2.8 instead of the reference 2.4. In practice this meant the image was artificially dark and appeared washed out of colour, with details in dark areas (the shadows) completely lost. The opposite was true in HDR material, where brightness reproduction is handled by the EOTF curve. That curve was pushed too high above the correct value, which resulted in the picture being artificially brightened across most luminance ranges. As with every TV we test, we also subjected this unit to professional calibration. You can see the results and how we managed to correct those factory errors below.

Fortunately, with professional calibration, most of the factory shortcomings of the Bravia 9 II can be effectively eliminated. We managed to precisely correct primarily the white balance and the gamma and EOTF curves. After those adjustments, in everyday use and during movie sessions the TV looks vastly better. The image gained proper dimensionality, the cool tint to the whites disappeared, and shadow details that had previously been lost due to excessively high gamma finally became clearly visible. Although we ultimately assess colour accuracy as very good, as specialists we must point out one fairly serious design flaw in this model. The Bravia 9 II could look even better if it weren't for the complete lack of an advanced colour management system in the TV's menu.

While a basic white balance correction can be carried out here without issue, the settings lack options for adjusting specific colours. We tried to tackle this from every angle, both using the traditional method from the remote and with dedicated calibration software for Bravia TVs. Unfortunately, that function has been entirely locked. We suspect this may stem from the specifics of the new RGB architecture, which imposes these limitations. It's a real shame, because without it you can't fine-tune colour reproduction to perfection. The inaccurate red, for example, still stands out. Let's hope Sony will fix this shortcoming over time via an update.