SONY BRAVIA 3 II (XR35M2) vs TCL P7L / P79L

Bravia 3 II is certainly not a TV that tries to impress with brightness. In our measurements it reached about 450 nits, so it's far from the strongest designs on the market. That said, HDR here is not just a paper feature. Compared with regular SDR material, the brightest parts of the image can already punch through, and reflections, highlights, or stronger exposures have a bit more energy and stand out better from the rest of the scene. You can see this best in simpler shots where many bright elements appear on screen. Then the Bravia 3 II can give a hint of a higher-dynamic-range picture. The problem only starts with more demanding content, where much greater brightness headroom is needed. There the TV quickly shows its limits and instead of strong, striking HDR we get only a correctly rendered picture.

Colors

Bravia 3 II uses a QLED-type panel, although technically it does not use a traditional quantum-dot layer. Instead Sony applied a PFS phosphor-based solution that serves a very similar role: it allows for more saturated reds and greens and thus lets the TV display a much wider color gamut. Measurements showed about 94% coverage of the DCI-P3 gamut and about 74.4% of the very wide BT.2020. Those are good results for this class of hardware, meaning the Bravia 3 II has no problem showing adequately saturated colors in HDR content. Colors don't look washed out, and the more intense shades can look really attractive.

The biggest limitation of the TCL P7L in HDR is simply brightness. The TV doesn't have a large luminance headroom, so strong highlights, sunlight, or small light sources can't clearly "pop" out of the image. As a result, even well-produced HDR material looks fairly restrained and in terms of dynamic range is closer to good SDR than to what brighter models show. That doesn't mean the P7L can't handle HDR at all — the issue is mainly a lack of sufficient backlight power.

Looking at color, the situation is a bit better. The TV covers about 91% of the DCI-P3 gamut and about 68% of the wider BT.2020 color space, so for its price class the color range is quite decent. TCL markets this model as QLED, though the nature of the solution used is closer to a PFS phosphor-based backlight than a classic quantum-dot layer. What matters most to viewers, however, is the result: more saturated colors are available.

In Professional mode the Bravia 3 II, straight out of the box, delivers a fairly good level of color reproduction. In SDR the most noticeable issue is a slightly low gamma, which makes the midtone areas a bit brighter. White balance is not perfect either; as brightness increases there is a slight lack of blue and red, so whites can sometimes take on a slightly warmer, mildly greenish tint. However, these are not errors that immediately stand out while watching a movie. Average error values hover around 3, so the factory preset can be considered quite good. The situation is similar in HDR. Here again there is a slight deficiency in the blue component, so the image is a touch warmer than the reference, but the difference is not large enough to be significantly distracting during normal viewing.

In Film mode the TCL P7L performs fairly well without major adjustments, especially with typical SDR material. The white balance is relatively even, although as brightness increases there is a slight rise in red and blue and a bit of a shortage of green. This does not produce a strongly noticeable tint and most colors remain close to their reference points. The ColorChecker confirms this, with a large portion of errors falling below a level that would notably bother viewers during normal watching. We have more concerns about the gamma response. In the darkest parts of the image the TV runs it noticeably above the reference, so some shadow detail can be a little too dimmed. The curve then settles and for much of the range it is close to the intended target. As a result SDR generally looks natural, but in dark scenes the P7L can lose some subtlety. In HDR the factory setting is less precise. As brightness increases an excess of blue becomes more pronounced, making the image look cooler than it should. The number of larger color deviations also grows, particularly in brighter hues. The EOTF curve itself is handled fairly conservatively, with the TV showing the image darker than the reference over a large portion of the range. For a budget model, however, the factory Film mode settings are not bad.

After calibration you can get a lot out of SDR content. The white balance was set almost perfectly, gamma practically matches the reference value, and average color errors fell from around 3 to about 1. That's a level at which differences from the reference image are, in practice, very hard to detect. The Bravia 3 II therefore shows that despite its position in Sony's lineup it has quite a lot of potential for precise picture tuning. Improvements are also visible in HDR, although here you can no longer work around all of the TV's limitations. After equalizing the colors it's easier to notice that the EOTF curve in film material runs slightly below the reference value in places, meaning the Bravia 3 II slightly darkens part of the image. That's not ideal from a reference standpoint, but in this particular TV it also has an advantage. With no local dimming and average black levels, this behavior slightly reduces the visibility of the backlight in darker scenes and helps maintain a greater sense of contrast. So you could say Sony partially masks the limits of the panel that way, rather than trying at all costs to stick to the reference luminance.

After calibration, the TCL P7L can deliver a really pleasant picture, especially with classic SDR material. We managed to very effectively even out the white balance, and the gamma curve now tracks close to the target value of 2.4. You can also see this in the color measurements, as most errors dropped noticeably, and in everyday viewing it's hard to find any strongly visible inaccuracies. Movies, series, YouTube, or regular TV therefore look more natural, without unnecessary warming or a cool cast. For a model in this price range, the result in SDR is really very good.

With HDR the situation gets more complicated. Calibration helped improve the white balance and tidy up some deviations, but here the panel's limitations become increasingly apparent. The P7L has relatively low brightness and can't maintain appropriate luminance for more saturated colors, so some errors remain even after careful tuning. In other words, settings can improve how the TV interprets the signal, but they can't overcome its physical capabilities. That's why calibration makes the most sense for this model primarily with SDR.

The Bravia 3 II is Sony’s first TV to use the new MediaTek Pentonic 800 chipset, and you can see a few changes in image processing. Starting with the basics: upscaling is solid. The TV can sensibly upscale lower-resolution material and doesn’t have a strong tendency to overemphasize jagged edges or other source imperfections. With regular broadcast TV or lower-quality streaming the picture remains quite pleasing. We have more reservations about the digital image processing. In this model Sony replaced the well-known "Smooth Gradation" feature with a new setting called "Digital Noise Reduction." Its role is essentially the same: to smooth unpleasant tonal transitions and artifacts caused by heavy compression. Unfortunately, this feature performs noticeably worse than before. At the "Large" setting — the only one that noticeably affected the picture — the TV can smooth away too many image elements at once, causing film grain to disappear and surface textures or even character skin to start looking unnatural. Worse, the effect is not very consistent. When a scene contains more motion the function’s effect weakens significantly and at times it looks as if the TV stops intervening in the image altogether. For everyday viewing we therefore don’t recommend using it at a high level. It can help on a static shot, but the price is often too much loss of detail.

In this regard the TCL P7L performs surprisingly well, especially for such an inexpensive TV. The tonal transition smoothing feature, which in many budget models does little or almost nothing, actually manages to improve the picture here. It doesn't remove all banding completely, but it can noticeably reduce posterization and make trickier gradients look more natural. At this price point that's a genuinely pleasant surprise.

Upscaling itself also performs well. Lower-resolution material is scaled correctly, without excessive sharpening or adding artificial outlines around objects. Of course the P7L won't turn a very poor source into 4K-quality footage, but for regular TV the result is simply solid. For a model in this class there is little to criticize.

Motion handling is definitely one of the Bravia 3 II's strongest points. The TV uses a 120 Hz VA panel, a solution that by nature, despite the high refresh rate, doesn't always cope well with motion blur. Here Sony has managed to get that problem very well under control. Fast-moving objects remain sharp, and the characteristic trails and blurring are reduced to a very low level, if not to zero. It's one of the least smearing LCD TVs we've had the chance to test. Interestingly, in this respect the Bravia 3 II can even outperform the much more expensive flagship True RGB series: the Bravia 9 II.

The TCL P7L uses a panel with a native 60 Hz refresh rate at 4K resolution, and that's how it should be treated in everyday use. For movies the TV mainly offers frame interpolation, so it can smooth motion and reduce the typical judder, but it does not deliver the smoothness of true 120 Hz panels.

Sony Bravia 3 II is a very good TV for gamers, although not everything has been handled the way we'd like. The biggest change concerns the connections. For the first time in a Sony TV we get four full HDMI 2.1 ports with 48 Gb/s bandwidth, thanks to the new MediaTek Pentonic 800 chipset. That removes one of the long-standing issues that has plagued the manufacturer's TVs. You can connect several devices at once and use each input's full capabilities, including VRR and ALLM. There's also a simple Game Bar that lets you check key signal parameters and change a few useful settings, such as black level, when you want to improve visibility in darker parts of a game.

There are, however, two limitations worth knowing. The first is the lack of support for 1440p at 120 Hz. This won't be a problem for everyone, but people using that resolution on a console or PC, for example to get higher frame rates in certain games, will have to choose 1080p. We have more reservations about HGiG support. Sony does not allow disabling tone mapping on the Bravia 3 II, so the TV continuously processes HDR content even when you would prefer to leave that task to the console. You can most easily notice this during HDR setup. The checkerboard pattern does not disappear at the point corresponding to the TV's actual capabilities. That doesn't mean HDR in games will look bad. You just need to approach the setup a bit differently and, instead of relying on the pattern, manually set the peak brightness to about 450 nits. The issue can be worked around, but you should know about it before you start configuring your console.

For such an inexpensive TV, the P7L has quite a lot to offer gamers. It has ALLM, VRR, Dolby Vision for gaming, and TCL adds its Game Bar, which lets you quickly view key information or change some settings without leaving the game. Not everything is perfect, though, because HGiG doesn't work here as it should, but at this price point it's hard to complain much about the feature set. The most interesting thing starts when you give up on 4K. At that resolution the TV runs at a maximum of 60 Hz, but at 1440p and 1080p it can already display at 120 Hz. And that's not just a spec-sheet curiosity. In fast-paced games that support that frame rate you can really notice the difference in smoothness, so if you care more about smoother motion than maximum image sharpness, that mode can make a lot of sense. Of course that doesn't make the P7L a true 120 Hz TV. Even so, it's precisely those extra modes that make the P7L perform really well for gaming.