SHARP JP7765E vs Dreame S100

So how does the brightness of the Sharp JP7 fare in the most demanding titles? Honestly, at first, we were quite surprised. The television is capable of achieving over 1000 nits of brightness, which is an outstanding and rare result for a device costing just under 2000 PLN (for 55 inches). Watching bright, full-screen scenes, one might feel they are dealing with really good equipment. Unfortunately, though, we have to return to the problem we mentioned earlier regarding local dimming management. When small bright areas appear on a dark background (as in the test scenes from the films Life of Pi or Sicario 2), it is evident how poorly the JP7 handles zones. The television dims them almost to the maximum, crushing the entire HDR effect, which in such moments resembles a flat SDR image (less than 200 nits). This instability means that in demanding, contrast-heavy films, the image on the JP7 unfortunately loses its appeal.

As a consolation, it is worth noting that the panel has the potential for good colour display. It features a PFS (phosphor) filter, which allows for a solid 94% coverage of the DCI-P3 palette. The manufacturer calls its product a “QLED,” even though it is primarily based on the aforementioned PFS filter. Given the recent market battles of manufacturers over what may or may not be called QLED, we leave the question of the correctness of this naming to your assessment. However, it remains a fact that the potential for reproducing saturated colours in this panel is simply good.

The Dreame S100 is a relatively bright television. In movie mode, the brightness we measured reached around 600 nits. This is a really good result, although not the highest when considering the competition at this price point. In fullscreen scenes, it is evident that the television can produce an image that impresses with its brightness. Unfortunately, when more complex scenes appeared on the screen, the local dimming algorithm in this model primarily focused on maintaining the deepest blacks. However, this came at the expense of HDR performance – and in a drastic manner. In such scenes, the brightness of bright elements dropped below 100 nits, which is a frankly tragic result, far from any HDR effect. One can improve this aspect, but not without a "however." It is simply necessary to change the local dimming setting in the television's menu, but then the blacks in such scenes simply become grey. It's a pity that Dreame couldn't better refine the local dimming algorithms, and the S100 is another example that the sheer number of local dimming zones does not always translate to a better image. As a consolation, it is worth adding that the Dreame S100 is advertised as a "QLED" type television, although in reality it uses a PFS LED filter. As a result, the colours are appropriately saturated, and the colour gamut coverage of DCI-P3 we measured exceeded 94%.

When it comes to out-of-the-box colours, the Sharp JP7 was tested in Film mode, which traditionally offers the most consistent image compared to the yellowed “Eco” mode or the glaring blue of the “Dynamic” mode. Although this is the best choice among the available settings, the results are still far from ideal. The white balance clearly lacked red and blue components, causing many scenes to take on an unnatural greenish tint. Another issue was the gamma – during full-screen scenes, the television provides excessive brightness, which completely diminishes its cinematic character. All of this resulted in colour reproduction errors, especially in shades of grey, which exceeded a value of Delta E 10. For reference: errors above 2-3 are already visible to the human eye, so we are dealing with a significant distortion of reality here.

In HDR mode, the situation is reversed, but not any better. Here, the blue colour dominates the white balance, which gives the image an unnatural, almost “retail” sharpness, reminiscent of aggressive demonstration modes. Furthermore, measurements of the EOTF curve emphasise the retail character of the image. The graph clearly shows that the television generates an image significantly brighter than the standards predict, resulting in an artificially boosted and unrealistic final effect. The Sharp JP7 is evidently trying to appear stronger than it actually is, but it does so at the cost of fidelity to the content.

We tested the Dreame S100 in 'movie' mode and we definitely recommend using this setting for watching all types of content. Interestingly, within the deeper settings of the television, we also find a dedicated 'Filmmaker' mode, which is now available from almost every manufacturer. However, in the case of the Dreame S100, we do not recommend using it – it blocks all settings related to the picture and does not allow for any configuration in the menu - even motion smoothing. So, how do the factory colours of the S100 fare? Not too badly, but also not the best. The television itself was quite heavily tinted with blue components, which is clearly visible in our white balance measurements. This made the picture artificially brightened, and the colours had a slight bluish tint. This is confirmed by the Color Checker palette, which showed how the colour samples tend to drift towards blue, generating quite significant colour errors. The picture in HDR mode looked definitely better, where the colour errors were not as prominent, although they still fell far from perfection. Here, the white balance was also shifted too much towards blue, causing considerable errors in colour reproduction.

We subjected the JP7 to our standard calibration procedure and really... the television gained a new lease of life thanks to it, particularly with SDR content (YouTube, classic television, series, or older films). As a result of our precise adjustment of the white balance and stabilisation of the gamma, colour errors fell to a value of below 3. This is a level at which the human eye has difficulty detecting distortions. In this scenario, the Sharp JP7 delivers an image with truly excellent colour precision, which is a significant advantage in this price class. However, content with HDR turned out to be much more problematic. Here, despite our efforts and interventions in the settings, the television simply would not cooperate. In the JP7 menu, we don't find any option that would allow for real control over brightness management (EOTF). Although a significant portion of the colour errors was reduced, the image still remained unnaturally oversaturated. It's a bit of a shame, as the potential of the mini-LED backlit panel is great, but the software presents a clear barrier here.

The conclusion is simple: when watching less demanding content (SDR) on the JP7, you can expect an image that is more than satisfactory, but in HDR, you must come to terms with a certain degree of "artificiality" that cannot be circumvented even with professional equipment.

The Dreame S100 has proven to be a device very amenable to professional calibration. In its menu, we found a plethora of advanced options that allowed us to effectively correct factory errors. Thanks to advanced white balance correction – both in SDR and HDR content – we completely eliminated the excess blue components. The image immediately became much more natural and pleasant to the eye. After fully tuning the colours, the errors in the Color Checker test dropped below Delta E values of 2-3. For the average viewer, this means that any colour distortions have become nearly impossible to perceive with the naked eye. This is truly a pleasant surprise, as new brands in the television market often encounter significant issues with the correct implementation and functioning of sliders in the calibration menu. Here, everything worked as it should. The only thing we must criticise is the way the television manages its brightness in HDR. Due to the specific nature of the local dimming algorithms, anomalies can be seen on the EOTF curve we measured. Where high highlights should appear, there is a slight boosting of the curve above the reference line. In practice, this causes an unnatural brightening of some of the brightest elements in films or games. Despite this minor flaw, professional calibration brings about a huge, very positive change in this model.

In the case of lower quality materials and how the Sharp JP7 handles them, the situation is ambiguous. Let's start with the upscaling itself – here we have no major objections. The process of scaling the image to a higher resolution is correct; the picture remains readable and sharp, without the overscan effect, meaning no cropped edges. Of course, it is not at the level of top models, and at times one can notice slight jaggedness on the contours, but in this price range, the effect is fully acceptable.

However, the actual digital image processing performs significantly worse, which, apart from the upscaling, effectively does not exist. In the JP7 menu, we will not find any option that would effectively smooth out unwanted tonal transitions or reduce noise in the image. As a result, the signal reaches the panel in a very raw form, which, with heavily compressed materials (e.g. from YouTube), leads to visible posterisation. Either it is a flaw in the software or a very strange design decision, because in earlier Sharp models this function was available and, crucially, worked with noticeable effect. Here, we are left to deal with whatever the source provides us, without any digital support from the image processor.

For scaling and digital processing in the Dreame S100, the technology that the manufacturer proudly calls Dreamind™ Pro AI is responsible. However, it must be clearly stated that this is not a proprietary processor, but merely a marketing name for a chip made by MediaTek – more precisely, the MT5889 model. Unfortunately, we are talking about a rather outdated unit, from a time when MediaTek lagged significantly behind the competition in terms of performance. This unfortunately has a direct impact on the image as that is what this chip also deals with. The upscaling in the S100 is quite mediocre, and the processor has a tendency to heavily and artificially sharpen edges (fortunately, this can be somewhat tempered with the sharpness slider in the menu). In the options, we also find the "Contour Smoothing" feature, which theoretically is supposed to improve tonal transitions. In practice, it offers almost no improvement – setting it to any level rarely eliminates visible banding of colours, but it can unnecessarily blur elements of the image that should remain sharp.

A separate issue is the phenomenon of overscan (cropping the edges of the frame), which is noticeable here practically all the time. Although there is an option to set the screen to display the full frame in low-resolution materials, this requires activating the previously mentioned Filmmaker mode. And as you know, this mode completely blocks the adjustment of any other sliders in the picture menu. In our test tables, we marked that the television offers an option to disable overscan, as technically such a function exists in the system – however, in everyday use, when maintaining sensible image settings, you will not be able to take advantage of it.

The motion fluidity on the Sharp JP7 is quite mediocre, and the reason is simple: the television uses a 60Hz panel. This instantly makes it difficult to recommend for watching sports or serious gaming, where higher refresh rates are already the standard. The only real plus is the presence of a smoothness feature, which we can control in films using a slider called De-judder. Lower settings provide a more raw, "cinematic" (framey) image, while higher settings add artificial smoothness. We suggest setting it somewhere in the middle of the scale, that is in the range of 3-5 – this is the best compromise to avoid the soap opera effect while also eliminating the tiring stuttering of the image. Interestingly, in the menu, we also find a "motion blur removal" slider, which usually indicates the presence of a 120Hz panel. However, with the JP7, it does not enhance the image at all and serves rather as a dummy – it is meant to look good in the settings, but technically it has no right to operate on this panel.

When it comes to motion fluidity, the Dreame S100 performs really well. It features a panel with a refresh rate of 144 Hz, although in reality, the vast majority of people using it in a traditional way will still be limited to 120 Hz (as this is the maximum supported by today's equipment apart from PCs). Thanks to the high refresh rate, the image in motion remains really sharp, largely thanks to the well-functioning MEMC smoother. In the menu, we find predefined modes that allow the television to efficiently generate artificial frames, which effectively improves the fluidity of dynamic sports scenes, but also eliminates image stuttering in film and series materials recorded at 24 frames.

As we mentioned earlier, the 60Hz panel is not a feature that will attract gamers to the Sharp JP7. Perhaps for the casual player, whose console still generates most titles at 60 frames per second, there might be something interesting? When it comes to specific additions, we find here:

• ALLM Mode: Automatically switches the television to low latency game mode (input lag).

• Game Menu: Which is hard to call a full-fledged “Game Bar,” as the functionality here is minimal. Aside from enabling ALLM, there’s only a game-specific motion smoother which we recommend avoiding as it introduces very noticeable artifacts and worsens responsiveness.

• Dolby Vision Gaming: For Microsoft consoles.

Unfortunately, the list of shortcomings is significantly longer and more painful than the positives. The biggest disappointment is the lack of support for 120Hz, even when reducing the resolution to Full HD. The presence of 120Hz would allow for performance modes to be activated in many games on PS5 or Xbox Series X. Another shortcoming is VRR, which means that during frame drops, we are exposed to screen tearing. The lack of proper implementation of the HGiG standard is also very problematic. This results in the fact that during HDR calibration in the console menu, it is very easy to "overshoot" the brightness settings. As a result, instead of clear details in the highlights, we end up with an unnaturally over-bright image with cut-off details. Sharp JP7 is a proposition solely for very casual gamers.

The Dreame S100 seems almost like the perfect screen for a gamer. The television is equipped with 2 HDMI 2.1 ports with a bandwidth of 40 Gbps, which means that functions like automatic game mode (ALLM) and variable refresh rate (VRR) ranging from 48 to 144 Hz work seamlessly on consoles. It also features a well-designed gaming panel (Game Bar), allowing users to continuously monitor important parameters—from active picture modes to the number of frames rendered by the console, and even the option to add a crosshair in the middle of the screen. All of this looks great on paper; however, the biggest problem with the S100 is the implementation of HDR mode in games. The television does not have the HGiG format implemented correctly. As a result, an unsuspecting user may incorrectly configure the console when first using the screen. Poor configuration can lead to an image that is too dark or too washed out (as a guideline: we suggest setting the brightness in the Xbox console menu to around 600 nits, and in the PS5 to 12 clicks). The Dolby Vision format also proves problematic, as it often would not activate at all between the XBOX and Dreame S100. And when it was finally managed to be activated, playing was not possible due to a very high input lag often exceeding 100ms. If the manufacturer can improve the HDR issue in games via an update, the S100 will be truly excellent hardware for gamers. For now, however, compromises need to be accepted.