Samsung The Frame Pro vs TCL C7L

Samsung The Frame Pro is one of the relatively bright televisions. In synthetic tests, we managed to achieve values around 900 nits, which is quite a respectable result for a lifestyle model. In full-screen scenes, such as the board from the film The Meg or the initial sequence in Life of Pi, brightness maintained a level of 700–800 nits. These values allow you to fully enjoy the HDR effects and convey their cinematic magic. However, the situation becomes complicated when smaller, point light sources appear on the screen. The edge lighting used here, equipped with the ability to locally dim entire strips, does not manage these well. Sometimes, small elements are overly dimmed, which weakens the effect, or conversely – they are significantly brightened, but at the cost of losing the depth of black in that part of the image. This can be compared to light beams reminiscent of a laser beam spreading in dense fog – the effect is noticeable and bright, yet at the same time, it is quite unnatural and distracting. Fortunately, the colour aspect performs better. Thanks to the use of a quantum dot filter (QLED), colours are saturated, and the reproduction of the DCI-P3 palette exceeds 92%. Generally, films or series watched in HDR on The Frame Pro showcase a rich colour palette, even if contrast and the functioning of the dimming algorithms can sometimes distract us.

The TCL C7L is, without doubt, an extremely bright TV. In synthetic tests using static test patterns it can reach peak brightness of around 2800 nits. That's a truly phenomenal result, given the price bracket it occupies. Unfortunately, measurements with real film scenes are not as spectacular as the white-square tests. Brightness in real HDR footage on the C7L falls to around 1200 nits. That's still very good, because the vast majority of modern films are graded to that level. However, when small, pinpoint elements appear on screen, the brightness of those details drops dramatically, even to around 400 nits, which reduces the HDR impact. The TV does this deliberately to preserve black levels and avoid excessive blooming. This is somewhat understandable, but it also shows that Mini LED technology is not completely without compromises in this respect. As for the HDR effect itself, alongside brightness the key factor is, of course, colour. Thanks to the use of new 'super' quantum dots, the colours are simply superb and among the best on the market. The TV is able to achieve very wide coverage of the BT.2020 and DCI-P3 colour gamuts, matching the best RGB Mini-LED screens with ease. Best of all, the C7L can maintain such high colour saturation regardless of the scene being displayed, which is often problematic in competing RGB Mini-LED TVs.

We achieved the best results, of course, in Filmmaker mode, which immediately showed that Samsung had put effort into the factory settings. In SDR content – the type most commonly viewed – The Frame Pro performed really well. The white balance and gamma were almost perfectly matched, giving the image a natural and cohesive appearance. Admittedly, there were some noticeable errors, particularly in skin tones and reds, which could be overly saturated, giving everything a slightly "warmed-up" character, but this didn’t significantly detract from the viewing experience in everyday use. For HDR content, the situation was similar regarding the white balance. This was at a good level; however, the biggest issue turned out to be brightness management. The EOTF curve was set in such a way that in many scenes, the image appeared blown out, with the brightest areas losing detail and turning into uniform patches of light. This severely undermined realism and caused the colours to appear overly sharpened. Fortunately, Samsung provides the option for manual adjustment of the curve in their televisions, so we opted for calibration, and its results can be seen below.

When it comes to out-of-the-box colours, what's new in TCL TVs, including the C7L model, is the addition of a picture mode called Filmmaker Mode. This is significant because such a mode was not previously available from this manufacturer. As the name suggests, this setting is meant to present the picture with the filmmaker's full intent. After our tests we can confirm that it is, without doubt, the best built-in mode on this TV if you want faithful colour reproduction straight out of the box. However, we certainly wouldn't say it's perfect. Like most devices on the market, this C7L also had some factory calibration errors. The white balance in Filmmaker mode drifted towards a slightly greenish-yellow tint, caused mainly by an excess of the green component and a noticeable shortfall in blue. Of course, this won't be a major drawback for the average viewer, but if you care about perfect whites, natural skin tones and getting the full potential out of the structure of those new "super" quantum dots, the TV really needs professional calibration.

After calibration, the SDR mode looks absolutely perfect. We managed to eliminate the overly strong red saturation, which previously gave the image a somewhat excessively warm character. Colours have become more balanced, which resulted in a natural and pleasant reception of everyday content – from television to films and series from streaming or materials on YouTube. In HDR mode, the most work was required on the EOTF curve, which factory settings caused excessive brightening of the entire image. Calibration allowed us to largely "tame" this problem – the image stopped being overexposed, and details in bright areas became more visible. Of course, the limitations are set by the design of the television itself, as edge lighting reveals its constraints, and the smallest elements of light can still be overblown or blend into the background. However, this is a matter of technology, not just calibration. After the correction, The Frame Pro is significantly more enjoyable to watch, and it is certainly worth considering if you want to maximise the television's capabilities.

After professional calibration we managed to greatly improve the situation in the factory Filmmaker Mode. After our corrections, the errors in the ColorChecker test and across the wide colour gamut fell below the threshold of human perception, that is below a value of 3, which is a very good result. The TCL C7L definitely benefits from such a procedure in terms of colour fidelity, and it's hard to deny. Brightness management for HDR content looks a little worse after calibration, though. As I described earlier, even though we set this model up correctly, when you play real film scenes the TV can handle its brightness in a rather peculiar way. It often brightens some elements on screen contrary to the creator's intent, which is clearly visible in the EOTF traces measured from specific films. Despite this defect, or rather a specific characteristic of the television, one thing you can't fault is that after calibration the C7L was able to reproduce colours accurately.

Although the fluidity of tonal transitions in 4K HDR materials on The Frame Pro is not a problem at all, naturally, with a weaker signal - television, HD materials, or older Full HD films - imperfections may arise. Therefore, it is crucial how the television copes with these limitations thanks to its image processor. The noise reduction function works really effectively here. At the medium setting, it eliminates unwanted bands or artefacts, smoothing the image in a noticeable yet not excessive way. However, it's worth noting that Samsung tends to be aggressive in its approach - even at the lowest level of this function, it can "consume" film grain. So it's advisable to use it judiciously and adjust the settings to the material being viewed.

The upscaling itself is at a high level. The Frame Pro can effectively enhance older materials to a native 4K resolution while maintaining good sharpness and readability. Films and series in lower quality simply look better here. However, it should be mentioned that there is a minor drawback - typical for many Samsung televisions. With very old sources of poor quality, you may notice clipping of the image edges on the left side of the screen. It's not a problem that will ruin the viewing experience, but it's worth knowing that it might occur.

This can be seen as, to some extent, the Achilles' heel of the C7L. Unfortunately, this TV uses the older MediaTek Pentonic 700 chip, which has never been famed for outstanding digital image processing. You can clearly see that in the behaviour of the progressive smoothing function, the feature responsible for reducing jagged edges and removing digital noise. It simply performs very poorly. When set to low, its effectiveness is almost non-existent. The only small plus is that the algorithm does not further spoil the picture or blur details unnecessarily. Upscaling, that is scaling lower-resolution content to 4K, performs slightly better. It is simply adequate and does not stand out against the competition. There is no denying that the C7L would benefit greatly in this regard if the manufacturer opted for the newer Pentonic 800 processor, which is now appearing in an increasing number of rival models.

The smoothness of motion in The Frame Pro is not only due to the matrix, which operates with a refresh rate of up to 144 Hz, but also the image processor and the smoothing system. It is thanks to this that we can adjust the way films or sports broadcasts are displayed to our own preferences. There are sliders for reducing blurring and reducing judder – the first function improves the sharpness of fast movements, while the second helps to soften the effect of a "jumping" image during camera pans. So, everyone can choose between a cinematic motion character and a smoother, more "television" style.

The TCL C7L uses a native 4K panel with a 144 Hz refresh rate, which at lower resolutions when connected to a PC can even reach up to 288 Hz. These are, of course, very high figures and impressive on paper, but bear in mind that almost all the dynamic content you’ll watch on this TV will still run at around a maximum of 120 Hz. To rein in that motion, the TV’s menu includes a motion-smoothing system called "Motion Clarity". It offers several preset modes, including a user mode that we strongly recommend you set manually using our tried-and-tested guides on our YouTube channel. There are two key sliders available. The first, "Blur Reduction", is responsible for cutting motion blur and improving sharpness in dynamic 60-fps material, such as sports broadcasts. The second slider, "Flicker Reduction", lets you add artificial frames to films and series shot in cinematic 24 or 30 frames per second. This, of course, can completely eliminate the irritating judder that appears during camera movement.

Samsung The Frame Pro does not pretend to be just a “living room” television; here, gamers will also find something for themselves. The manufacturer has ensured a full range of gaming features: we have support for variable refresh rate (VRR), automatic low latency mode (ALLM), refresh rates up to 144 Hz, and compatibility with both G-Sync and FreeSync Premium Pro. Additionally, there is the well-known Game Bar panel, which is a quick menu where key parameters can be checked on the fly—from refresh rates to enabled image processing modes. Are there any downsides? Indeed, The Frame Pro does not support Dolby Vision in game mode, but this is hard to consider a serious issue—most gamers use HDR10 anyway... which means HGIG mode. Exactly. The biggest surprise turned out to be the latest software update. Samsung… completely removed this option from The Frame PRO. In practice, this means that the television independently interprets HDR tone mapping in games, and the user has no way to enable settings developed for consoles. This is a step backwards that may disappoint more knowledgeable gamers hoping for full compliance with HGiG guidelines. We can only hope that this issue will be resolved quickly.

An interesting feature of The Frame Pro is also the unusual arrangement of HDMI 2.1 ports. There are as many as five available—four are located in the One Connect box, and the fifth, in micro HDMI version, is directly on the television. This is quite an unusual solution, but rather practical. Samsung clearly suggests that this is the port to which you should connect your console or computer. Why? Because it minimises potential delays associated with communication through the wireless One Connect, and in the case of gaming, every millisecond matters. We have written separately about input lag, but it can already be revealed here that by connecting equipment directly to the television, we achieve the absolute maximum in response speed.

When it comes to gaming, the TCL C7L is simply an outstanding TV for players. Thanks to two HDMI 2.1 ports with full 48 Gbps bandwidth, you get access to all the key features required by console owners and powerful PC rigs. There’s a well-working ALLM mode with very low input lag and VRR frame synchronisation that operates over an impressive range from 48 to 288 Hz. Importantly, unlike some rivals, TCL has properly implemented the console HDR10 HGIG profile and supports Dolby Vision in games. The package is completed by a very well designed gamer panel, the Game Bar, which even lets you edit its appearance and change the theme so it perfectly matches the style of your console.

The only thing you can, and even should, criticise is that the TV offers only two full-spec HDMI 2.1 ports, while the other two are older HDMI 2.0. That creates quite a logistical problem. Why? Because one of the fast ports also handles the return audio channel eARC. In practice this means that if you connect a soundbar or home cinema system to the TV, you’ll be left with just one free HDMI 2.1 socket. If you have two consoles at home, or a console and a powerful PC, unfortunately you’ll have to give something up or keep juggling cables at the back of the case while trying to maintain convenient control of the audio system.