Philips PUS8079 vs Hisense A6Q

The maximum brightness in content with a wide tonal range at a level of 202 nits is extremely low and, in practice, does not allow for watching films and series on streaming platforms in the highest quality. It is worth mentioning that in this case, the use of the HDR format equipped with dynamic metadata will not help either. Why won't it help? Because the only such format implemented in the television is HDR10+, which is extremely unpopular, and films recorded in this format are scarce. It is also worth noting that PUS8079 utilises WLED backlighting, which unfortunately is not the best solution, resulting in a coverage of the wide DCI-P3 colour gamut of only 80%. The result of this situation is significantly less intense colours in HDR content.

The Hisense A6Q is unfortunately difficult to recommend for watching HDR content. The main issues are low brightness and rather modest coverage of a wide colour gamut. The measured brightness of around 300 nits simply isn't sufficient for HDR materials to look impressive. In practice, the picture often resembles standard SDR instead of true HDR with clear differences in brightness and dynamics. Additionally, the colours in such materials do not appear as they should. The television does not utilise additional filters such as QLED or PFS LED, and the coverage of the DCI-P3 colour space at around 80% means that some colours look rather washed out. Consequently, some scenes in HDR materials lose intensity and spectacle, making it difficult to speak of a full HDR experience.

The best factory mode in terms of colour reproduction and fidelity to the director's vision was "Film". Admittedly, it was the best among the pre-defined modes, although it had significant discrepancies between what the film's author wanted to convey and what the tested television displayed. Both in SDR and HDR materials (though to a lesser extent in the latter), the white balance, which is the most fundamental element responsible for image purity, turned out to be somewhat of a repeat of the vivid mode, with the blue tint known from displays on shop shelves. Moving directly to SDR materials and what is responsible for contrast, namely gamma, we see that it is significantly reduced. This leads to cutting down on an already limited contrast range and brightening the entire image. In the EOTF curve, which is responsible for the increase in brightness pace in HDR materials, we observe a sharp drop below the reference line, which, given the limited light output of the television, had a significant impact on the perception of these contents, which were even darker. We will not separate the assessments of the colours themselves, as in both cases they achieved astronomical deltaE values, being simply completely different from what they should be.

We conducted the tests in the best available mode, namely Filmmaker, however – as is often the case – this does not mean an ideal image straight out of the box. In the case of Hisense A6Q, this mode clearly "swallowed" too much blue in everyday SDR content. In practice, this led to an image with a yellowed white, particularly noticeable on large, bright surfaces. This is not due to poor assumptions of the Filmmaker mode itself or the vision of filmmakers, but rather the factory settings requiring adjustment.
Furthermore, looking at the saturation characteristics and the gamma curve in SDR, as well as EOTF in HDR content, there is a slight tendency to brighten most scenes. As a result, the image often appears brighter than it should, losing a bit of its naturalness. For this reason, we decided to perform a professional calibration to restore the proper colour balance and a more accurate brightness characteristic.

Fortunately, Philips implements advanced image correction tools in all its televisions. SDR materials benefited the most here, and the enormous deltaE errors were significantly corrected, both white balance and gamma underwent considerable reshaping. Although one cannot speak of a reference image here, it is definitely better, and films or series can be watched without causing headaches, and above all, eye strain. Naturally, HDR materials, due to the very low luminance of the television, could not be corrected to the same extent as those with a standard colour palette; however, the EOTF curve and white balance were roughly straightened out. Unfortunately, that was all we managed to squeeze out of our unit, although it should be noted that each unit is different and has completely different errors, smaller or larger.

The colours after calibration in the Hisense A6Q should be assessed in two ways, as everything depends on the type of content. In the case of SDR material, the effect is truly very good. In everyday programmes, series, and films, it is difficult to spot any serious problems with colours. The yellow tint has been effectively removed, and the television no longer brightens the entire image. As a result, the ColorChecker test showed errors below Delta 2 values, which are already outstanding results, allowing us to speak of very high image quality in standard content. Unfortunately, the situation looks significantly worse in the case of HDR material. Yes, the white balance has been corrected and the EOTF curve has been improved, but the limitations of the panel itself remain insurmountable. The lack of support for a wide colour gamut means the television still generates quite significant colour errors. Certain colours simply cannot be displayed by the screen, making them appear less saturated than they should be. It's a shame because even a simple PFS or QLED filter would significantly improve the final effect. The conclusion is therefore simple – the A6Q is really very well suited for SDR content after calibration, while watching HDR content on it should still be approached with caution.

We will return once more to the issue of tonal transitions but in the context of the overall improvement of image quality. As we can observe in the photograph on the left side, the enhancement function for gradation works brilliantly. Moreover, it offers several settings, and each of them, even the lowest one, provides beneficial effects, and what’s more, it does not soften the effect of film grain. We will reiterate that this function is the greatest advantage of the tested television.

Next, we will take a look at image scaling. Here, the tested television performed worse. We can primarily notice severely jagged fine details and a characteristic white halo around the figures. One must not forget about the considerable artificial sharpening of the image.

Upscaling on the Hisense A6Q works quite decently for a television in this price range. Materials of lower resolution are correctly "upscaled" to a higher one, and the image remains clear without artificial edge enhancement or the typical "over-sharpening" found in cheap models. Unfortunately, the digital processing is significantly worse. In practice, it is difficult to speak of any advanced artifact smoothing or problematic tonal transition masking. In heavily compressed films – especially those from YouTube – the television practically struggles with reducing compression blocks and unwanted banding, making the imperfections in the material clearly visible. The A6Q scales the image well, but when it comes to digital processing, it leaves the user alone with the quality of the source.

This paragraph, unlike the others, will be extremely short. The reason for this state of affairs is the lack of implementation of even the most basic motion smoothing function, which was to be expected, considering the price of the device. We also note that we are dealing with a VA panel, which in itself will not have the best sharpness under the sun. This type of panel is primarily associated with high contrast, which goes hand in hand with quite slow response times, as we can clearly read from the matrix analysis results. As you can see, from the photos taken in quick motion, the image is typically blurred for this type of panel. Although it will not be the ideal option, it can conditionally be used for watching sports, keeping in mind the less than optimal sharpness in motion. It is worth mentioning that movies will be characterised by judder, as the television does not have any, even the simplest, motion smoother.

The motion fluidity of the Hisense A6Q is… well — quite mediocre. It’s a television with a native refresh rate of 60 Hz in 4K, which means that the motion of objects on the screen doesn’t always look perfectly smooth. In dynamic scenes in movies or sports, it’s clear that this isn’t the strongest feature of this model. The situation improves significantly with 1080p content when connecting a console or computer, as the A6Q can operate even at 120 Hz then. This is a big plus, especially for gamers. Nevertheless, the clarity of motion still leaves much to be desired; blurring is noticeable, and the response time of the panel indicates that it is not one of this television’s strong points.

Philips PUS8079 offers only the most basic support for gaming in the form of ALLM, VRR, and a Game Bar. The most important information is that thanks to the implementation of the feature responsible for dynamic frequency changing, the picture is actually quite smooth for this price range and does not suffer from tearing.

A slightly greater nod towards gamers is the introduction of the Game Bar, allowing for real-time editing of settings. This means we won't have to exit the game to make any changes to the picture. Importantly, it has not been stripped of options known from higher models. Thus, we will find features such as shadow enhancement for better visibility in dark areas and a colour filter for players with visual impairments.

For such an inexpensive television, the Hisense A6Q can truly surprise with what it offers to gamers. It operates in 4K only at 60 Hz, but when a game switches to performance mode and drops to 1080p, the panel can work even at 120 Hz. This is a significant advantage in this price range, as most titles on consoles don't achieve stable 4K at 120 frames per second anyway. In practice, we are realistically playing at 1080p, and here the A6Q provides very enjoyable gaming experiences. On top of that, there are several features usually found in more expensive models: ALLM, VRR, and Dolby Vision Gaming for Xbox Series X/S. Everything is gathered in one place, in a simple and convenient Game Bar, so there's no need to dig through the entire menu. For such an affordable piece of equipment, it's a really solid set for gamers — perhaps not for the most demanding, but certainly spot on for occasional gaming.