Xiaomi S Pro 2026 vs PHILIPS PUS9010 (IPS)

When it comes to HDR quality, the Xiaomi S Pro 2026 is undoubtedly a very bright television. On our synthetic measurement patterns, we were able to achieve peak brightness of around 1400 nits. This result is not only very good but quite spectacular, considering the price of this model. However, as we always say, our editorial team values measurements and the viewing experience of content that people watch on a daily basis – from movies to series. So let’s analyse how Xiaomi performs with film material. The result is, unfortunately, quite mixed. When very bright scenes appear on screen, the S Pro 2026 truly shows its full capabilities and can achieve a real 800-1000 nits on bright elements. Moreover, even smaller objects can "burn" the eyes – in scenes from the movie Sicario 2, small metallic parts of the helicopter were really vivid. The problem is – and here the story comes full circle, returning to our contrast assessment – that in such scenes, we can’t count on absolutely cinematic black. In our opinion, this compromise is too significant; the high visibility of details in bright sections should not come at the expense of such a substantial drop in blacks. And even though the HDR effect can create a stunning impression here, it’s important to remember that when very challenging, mixed scenes appear on screen, we may feel a slight disappointment. Precisely the one we mentioned in the previous paragraph regarding issues with dimming in HDR mode. As a consolation, it’s worth adding that the S Pro 2026 is equipped with an additional PFS filter (similar in function to a QLED layer), which effectively broadens the colour gamut coverage. As a result, measurements showed DCI-P3 coverage reaching 94%. This gives us confidence that in most colourful scenes, the image will look rich and properly saturated.

In the Philips PUS9010 version with an IPS panel, the HDR brightness sadly performs worse than in the previously tested 55-inch variant with a VA panel. The difference reaches about 100 nits, which is noticeably significant given the relatively low values. While the VA version could exceed 500 nits, here the maximum brightness reaches around 400 nits. This level still allows for watching movies and series in HDR, especially on streaming platforms, but the effects are clearly more subdued. Bright elements don't have the same impact, and scenes requiring high luminance are less impressive. On the plus side, the coverage of the DCI-P3 colour gamut is commendable. The IPS version offers about 91%, which is roughly 5% more than the variant with a VA panel. This translates into slightly better colour saturation in HDR content, despite the lower brightness. Colours can appear more vivid and cohesive, especially in colourful scenes.

Of course, all our measurements were conducted in "Film" mode, which is typically the best and most faithful choice we get straight after taking the TV out of the box. And to put it bluntly: while this is the best mode, it is still very far from perfect. Above all, the TV has a clear tendency to give the picture a cool, blueish tint – this is due to poorly set colour balance. Additionally, there is the issue of how the S Pro 2026 manages its brightness straight out of the box, which results in an over-saturated image. These two flaws contribute to really significant colourimetric errors (Delta E). In HDR content, they could double exceed our expected error scale of "10" (i.e. reaching values close to 20). Just to remind you – the threshold of perceivable error by the human eye is a Delta E value of around 3. Results at the level of 20 mean that the image significantly deviates from what the director intended.

We evaluated colour reproduction, as always, on factory settings, focusing on the movie mode, which in the case of Philips usually offers the best starting point. This is also a good moment to show how much the same model of TV can vary depending on the panel used. Looking at the white balance, the overall tendency remains similar to the version with the VA panel. There is still excessive red in the whites, however, in the tested unit with the IPS panel, there are also losses in the blue channel. As a result, the picture has a slightly different colour character, which is well illustrated in the comparative materials. This is a very good example showing why ready-made settings downloaded from the internet do not always work even within the same model.

However, returning to the assessment itself, this unit performs quite well, especially in SDR content. Colour tests show correct saturation and colour consistency, without glaring errors that could hinder everyday viewing. In HDR materials, it is possible to notice slight losses in reds, but these are not flaws that completely spoil the image perception. The biggest limitations do not stem directly from the colours, but rather from the whites and blacks. The use of an IPS panel and slightly lowered gamma means that the image is slightly boosted in brightness, and weak blacks further affect perceived contrast. This makes everything look brighter, but at the same time, it lacks depth, especially during evening viewing.

So how does the S Pro 2026 perform after our calibration process? We must admit that after calibration, the TV becomes a really enjoyable device for watching everyday content. As you can see in the charts, in HD (SDR) material, both white balance and gamma values have been brought to nearly perfection. Most importantly, colourimetric errors have become practically invisible to the human eye. In this scenario, the S Pro 2026 is simply a great TV that, after professional calibration, can provide a lot of joy from viewing. However, it is worth noting clearly – our efforts did little to help in 4K HDR mode. Despite the calibration, the TV still interprets the image quite strongly in its "own way," which is clearly evident in the measurement of the EOTF curve (brightness tracking). It's a bit of a shame because it shows that the problem lies not with the panel itself, but with the software. Poorly refined image management algorithms in HDR content can, unfortunately, rule this TV out for many more discerning users.

After calibration, the picture has been brought to a really reasonable level. The whole thing looks cohesive and natural, and when it comes to colour reproduction, it's hard to definitively say whether we're dealing with a VA or IPS panel. This is a good sign, showing that the television has a solid foundation for further adjustments. The larger colour gamut in this variant is a plus, as it can subtly enhance the depiction of colourful scenes, especially in HDR content. However, this advantage is largely offset by the boosted blacks resulting from the use of an IPS panel. The limited depth of black affects perceived contrast, particularly when watching in a dark room. As a result, despite noticeable improvement post-calibration, the final rating remains the same as that of the variant with a VA panel. Better colours are not able to fully compensate for the weaker blacks.

Let's start with the issue we raised in the previous paragraph: can a TV even fix the problem of terrible tonal transitions in dark scenes? Theoretically yes – in the menu, we find a feature with the promising name "Colour Contour Removal." Well, "theoretically." Unfortunately, in practice, this setting – regardless of which of the three power levels is chosen – yielded absolutely no real results. So we are dealing with a feature that practically only exists in the menu. Moving on to the quality of upscaling (scaling from a lower resolution to 4K), unfortunately, we have more bad news for you. The S Pro 2026 handles this task very poorly. Interestingly, the phenomenon of "overscan" (slight image cropping) is not a major issue here. The problem is that the TV simply shows a very raw, unprocessed image. Its attempt to boost the signal to a higher resolution looks simply dull and lacks any "intelligent" enhancement. There's no denying it – the entire digital image processing is the true Achilles' heel of this model.

In the Philips PUS9010, we find another iteration of the P5 Perfect Picture image processor, which aims to improve the quality of lower-grade materials. One of the components of this system is a distortion reduction function that smooths tonal transitions. It works effectively and actually reduces visible banding. Unfortunately, it does so quite aggressively. In practice, it can mute details such as material textures or film grain. This is a clear compromise, so we wouldn't particularly recommend it for movie sessions. For more casual content, like YouTube or regular television, it performs much better. The P5 processor also handles lower resolution materials quite well. The image is soft, at times even too soft, but it can easily be corrected using the sharpness slider, adjusting the effect to personal preferences. A positive aspect is also the absence of edge cropping in SD materials, which is still not standard in this class of televisions.

On paper, the specifications of the S Pro 2026 look impressive. The television is equipped with a native 144 Hz panel, capable of displaying images at up to 288 Hz in a dedicated gaming mode. These are incredible results, but what we were most interested in, in the context of everyday use, was how the TV handles motion blur and how the picture looks at 120 Hz. After all, this is the frequency used today by consoles such as the PlayStation 5, Xbox Series X/S, and it is desirable for sports fans. Generally, the panel "holds up". The matrix is quick enough to meet these challenges, and objects displayed at a native smoothness of 120 Hz are rendered correctly. When it comes to software, the TV is equipped with motion smoothing technology, but with a key caveat – it only works for input signals up to 60 Hz. This means it's mainly suitable for traditional TV, movies, and series. With it, we can adjust the smoothness of the picture to our own preferences – ranging from a very smooth, "theatrical" approach, to setting the slider at "zero" and maintaining a fully cinematic character.

Philips PUS9010 has a 4K panel with a refresh rate of 144 Hz, which will be appreciated mainly by sports fans and gamers. This is especially noticeable in dynamic scenes where the motion is sharp, and annoying blur is almost non-existent. When it comes to movies (standard 24 fps), Philips offers us a proven set of settings known from its higher series. Two sliders are used to control motion. “Smoothness” allows you to adjust the picture to your liking: at low settings, it maintains a cinematic character, while moving the slider to the right gives us a perfectly smooth, albeit slightly “theatrical” effect. Meanwhile, “Motion Blur Reduction” is a feature designed for sports – it ensures that fast-moving objects do not lose detail and remain clear.

For gamers, the Xiaomi S Pro 2026 is on paper an almost perfect proposition. It has been equipped with two HDMI 2.1 ports, which allow us to unlock (although these options are somewhat hidden in the menu) the full suite of features: ALLM, VRR, and, crucially, the ability to operate in 4K at 144 Hz. This last feature should particularly please owners of powerful PCs. The TV also has something resembling a gamer panel – and while it’s hard to call it a full-fledged "Gamebar," it does its job by displaying key information. It’s just a shame that in its default form, it covers a relatively large part of the screen.

The biggest problem we have with this model, however, concerns how the S Pro 2026 handles games in HDR mode. To put it bluntly: it doesn’t handle it well. Due to the poorly implemented HGiG feature (the HDR tone mapping standard for games), during the initial HDR calibration on the console, it’s very easy to "blow out" the image. If someone is unaware of this software flaw and follows the on-screen instructions, they will simply set the picture incorrectly, with burnt-out details in bright areas. Another significant issue is the Dolby Vision mode for games. While it works, it generates such a high input lag that it becomes noticeable in dynamic titles. (You can check all our lag measurements in the paragraph below). In summary: Generally, this is a really very good screen for gamers, but with one small caveat. We would rather avoid HDR mode on it – unless we decide to manually set the brightness slider on the console "by eye," completely ignoring the tips from the console's pictogram.

Philips PUS9010 is a solid machine for gaming. It has everything that’s important: VRR, automatic game mode (ALLM), and support for HGiG. The latter is fantastic – it allows you to set HDR in games exactly the way the developers envisioned. The TV handles 120 Hz refresh rates effortlessly at every popular resolution (1080p, 1440p, and 4K). It doesn’t matter if you connect a PS5, Xbox, or a powerful PC – everything runs smoothly and just as it should. Gamers will also appreciate the Game Bar. It’s a quick, clear menu where you can immediately see if the low latency mode is active. This is especially useful when frequently switching between different consoles. The whole experience is enhanced by Ambilight. Evening sessions with this backlighting create a whole different level of atmosphere; the image seems larger, and dynamic scenes are even more impressive. Even if someone isn’t a fan of such “gimmicks,” it’s hard to deny that it makes an impression.