Philips OLED910 vs Hisense U7S Pro

OLED910 is simply an absurdly bright television for an OLED. All thanks to the new panel from LG Display, the Tandem RGB OLED, which Philips has branded as "META OLED". It is this panel that allows for over 2000 nits of brightness in films, which not long ago was completely unachievable in OLEDs. The way the television handles full-screen scenes flooded with bright light also deserves high praise. Usually, in OLEDs, brightness drops significantly, but here it remains at a great level – around 1400 nits. These values are almost reference-level, and combined with excellent colour reproduction at 99% DCI P3 and 82% BT.2020, it gives us an HDR effect that can confidently be called one of the best in the world.

Let's start with the fact that the U7S Pro is an impressively bright TV. In calibrated mode our test equipment recorded a staggering 2200 nits of peak brightness. That's an excellent result, especially given that this model is positioned more as a mid-range set.

As we know, peak brightness on test patterns is one thing, and real film scenes are another. Unfortunately, in real-world footage the backlight output drops noticeably. In the most demanding moments the TV can still exceed 1000 nits, which is still a great result and sits well within the HDR mastering standards for most films, but the real challenge comes from aggressively tuned local dimming algorithms. Because of them, small bright details, like stars or the moon in a night sky, are noticeably dimmed. The TV seems determined to preserve deep blacks, which is understandable, but sadly this comes at the expense of dynamic range and the overall HDR punch.

Colour reproduction is worth praising. The new U7S Pro is a QLED design that provides very wide colour gamut coverage. Unlike last year's model (U7Q Pro), this year's variant is a genuine QLED rather than a solution based on a PFS filter. As a result, colour saturation has clearly increased, and coverage of the demanding BT.2020 colour space has exceeded 81%.

Update 01/2026

After conducting a series of calibrations of the OLED910 model with our clients, we noticed that the measurement results differ from those obtained during the initial tests. The factory tuning of the film mode proves to be significantly better than our first tests indicated. The white balance is set very precisely, with only a minimal red dominance. The factory colour reproduction holds close to reference standards – average Delta E errors hover around 3-4, which is an excellent result for factory settings. However, there is some concern about how the television manages brightness. Analysis of the Gamma (SDR) and EOTF (HDR) graphs shows a tendency to excessively "pull" details from the shadows. In practice, this means that the image can appear too bright, resulting in a loss of black depth in favour of visible details that should remain hidden. Of course, this effect can be effectively corrected during professional calibration.

Unfortunately, when it comes to colour reproduction straight out of the box, in Filmmaker mode the OLED910 performs really poorly. The television excessively highlights the blue colour, and at times it looks almost like a store mode. This gives the impression that the manufacturer hasn’t quite tuned the device well. The result is that colours appear unnatural, and the overall effect resembles a somewhat exaggerated display setup in a market. HDR content presents much better, where apart from a slight loss of details in the blacks, there’s not much to complain about. The problem is that in everyday viewing, it’s actually SDR material that matters most – and on the OLED910 it simply looks poor and falls far short of what we would expect from a television of this class.

We tested the U7S Pro, as we always do, in the best factory-tuned picture mode, Filmmaker Mode. The displayed colours can be judged in two ways. The most disappointing was the profile intended for SDR viewing, i.e. classic TV, YouTube and other less demanding content. The image there had a distinct yellow cast, which proved to be a direct result of an incorrectly set white balance. As our charts show, this involved a huge deficiency of the blue component, which drastically affected the overall colour temperature. You can see this clearly on the ColorChecker charts and on the colour palette graphs themselves, where most samples drifted towards yellow. Fortunately, the factory HDR mode performed much better; there the colour errors hovered around a Delta E of 3, which is a really solid result.

Fortunately, it quickly turned out that it wasn't the panel causing the problems, but the way Philips factory-tuned the OLED910. After calibration, the television showcased its full potential, and only then could we see what the new panels from LG Display were truly capable of. We primarily corrected the white balance and brightness characteristics, successfully taming the excessive blue and giving the image a natural look. The final effect can be described as excellent. Errors on the Color Checker palette rarely exceeded a value of 3, which in practice means an image close to ideal and colours presented in line with the creators' intent. In SDR content, the effect was stunning, and in HDR, the improvement was even more noticeable – gradients became cleaner, and colours fuller and more accurate. After calibration, the OLED910 transformed from a disappointing television into equipment that can be confidently referred to as reference-grade in terms of colour accuracy.

We do know, however, that the company Hisense is capable of much more – as previous generations have proven – which is why we simply couldn’t leave the factory flaws of the U7S Pro model unaddressed in everyday content. As always in such cases, we had the television undergo professional calibration. The conclusions? This process brought about a colossal change. After manually adjusting the white balance and compensating for deficiencies in the blue component, the annoying yellow tint disappeared as if by magic. White became naturally clean, and skin tones gained the proper, healthy hue. Importantly, the calibration not only tamed the capricious SDR mode but also maximised the potential of the panel, reducing average colour reproduction errors to values nearly imperceptible to the human eye. The only thing we need to criticise after the whole process is the very nature of the Mini-LED backlighting and its specific interaction with the HDR signal. The aggressively tuned local dimming algorithms significantly interfere with the EOTF brightness curve. As a result, the backlighting doesn’t always work perfectly with the creator’s intent – depending on the scene being watched, the curve can noticeably run either above or below the reference, occasionally disrupting the ideal dynamic of HDR images.

The previously visible colour connections can be largely mitigated thanks to a feature called "distortion reduction." Similar to the OLED820, it’s best to set it to medium level, as it then provides quite decent results – smoothing unwanted tonal transitions while not taking away too many details from the image. Although at times the effect may be a bit too aggressive, in everyday viewing, this function can be considered useful.

When it comes to image scaling, the OLED910 performs really well. The test material with the model showcased a characteristic soft look typical of Philips – at times almost too soft – but at any moment this can be adjusted with the sharpness slider to tailor the image to your own preferences. It’s also a plus that the television has no issues with overscan, which still occurs in some competitors' models. It’s a minor detail, but it’s pleasing as it means that all content, even the oldest, is displayed as it should be.

The digital processing of lower-quality signals is at a very high level here, and that's all thanks to the MediaTek Pentonic 800 processor used in the U7S Pro. The upscaling itself also performs well, meaning the TV's ability to upscale lower-resolution signals to 4K is impressive. We didn't notice any unnatural, overly sharp contours on the screen, and our test image of the model simply looked attractive.

OLED910 is a TV with a refresh rate of 144 Hz. It’s a bit of a shame that Philips didn’t opt for 165 Hz, as we know that the matrix used in it is capable of that. On the other hand, such a bonus will mainly benefit PC gamers, as for everyday use, the most important thing is the 120 Hz refresh rate, which is fully sufficient. Combined with the advantages of the OLED matrix – lightning-fast pixel response times and the absence of motion blur, the picture is impeccably sharp and fast, even in dynamic action scenes. The traditional motion smoother from Philips called “Motion Style” also deserves praise. We can easily adjust it to our own preferences: the “Smoothness” slider is for movies and allows you to choose between a more “framey,” cinematic character and a smooth, theatrical image. Meanwhile, the “Motion Blur Reduction” slider is intended for sports; here, it’s worth setting it to the maximum value so that the image is clear and sharp during very fast shots.

The Hisense U7S Pro uses a panel with a maximum refresh rate of 165 Hz at 4K, and in gaming mode it can even hit 330 Hz at Full HD. However, it's worth remembering that these top figures don't mean much in everyday use, because most content still runs at a maximum of 120 Hz (for example when playing on a console). Even so, the TV handles motion quite well and performs respectably for an LCD design.

There isn't much to fault when it comes to smoothness. In the menu you'll find a motion smoothing feature called "Motion Enhancement", which hides two sliders: blur reduction and judder reduction. They let you manually tune the smoothing, which works well for both films and sport, effectively improving the raw TV signal.

The OLED910 is fantastic for gaming. It supports 144 Hz, so if someone has a powerful PC, they'll easily make the most of that potential. For consoles, the most important thing is still 120 Hz, and everything works smoothly here. It has VRR, an automatic game mode, and even Dolby Vision in games along with HGiG mode, so we pretty much get a full package of gaming features. Philips also added a Game Bar, which is like a quick menu that shows basic information and allows you to enable a few handy features. It might not look as modern as the competition, but it works and does its job. The only downside is the number of HDMI 2.1 ports. There are only two, which can be quite disappointing in this class of television. If someone connects two consoles and something extra to the eARC - like a soundbar (which doesn't really make sense in this model, but more on that in the sound section), they'll have to do a bit more figuring around. Other than that, though, the OLED910 has everything we expect from a gaming TV.

If you're planning to connect a console or PC to the U7S Pro, you'll be more than pleased – this TV is great gear for gamers. Hisense hasn't held back, featuring 4 HDMI 2.1 ports with full bandwidth of 48 Gbps. So you don't have to juggle cables, as each port will handle the full suite of features. We have an automatic game mode (ALLM) and VRR, which operates over a wide range from 48 Hz to a whopping 330 Hz. Of course, that 330 Hz is currently just a gimmick for owners of powerful PCs, as consoles will cap at 120 Hz, but it's good to have that headroom for the future. The Game Bar also works really well when gaming. It's a handy menu bar for gamers, where you can quickly change the picture mode, turn on a crosshair in the middle of the screen, and even switch the display aspect ratio to ultra-wide, which PC simulation fans will appreciate. The only downside worth noting is the incorrect implementation of the HGiG format in games. The issue is that the TV ignores instructions from the console regarding the image generated in HDR10 and constantly butts in, trying to "enhance" the image in its own way. This makes proper HDR configuration in the console menu (where brightness is set on the logo/checkerboard) a bit more challenging.