Hisense U7S Pro vs SONY Bravia 9 II XR95M2

Let's start with the fact that the U7S Pro is an impressively bright TV. In calibrated mode our test equipment recorded a staggering 2200 nits of peak brightness. That's an excellent result, especially given that this model is positioned more as a mid-range set.

As we know, peak brightness on test patterns is one thing, and real film scenes are another. Unfortunately, in real-world footage the backlight output drops noticeably. In the most demanding moments the TV can still exceed 1000 nits, which is still a great result and sits well within the HDR mastering standards for most films, but the real challenge comes from aggressively tuned local dimming algorithms. Because of them, small bright details, like stars or the moon in a night sky, are noticeably dimmed. The TV seems determined to preserve deep blacks, which is understandable, but sadly this comes at the expense of dynamic range and the overall HDR punch.

Colour reproduction is worth praising. The new U7S Pro is a QLED design that provides very wide colour gamut coverage. Unlike last year's model (U7Q Pro), this year's variant is a genuine QLED rather than a solution based on a PFS filter. As a result, colour saturation has clearly increased, and coverage of the demanding BT.2020 colour space has exceeded 81%.

The real showcase for the new backlight architecture and Sony’s processor is HDR reproduction. At the official launch the Sony engineers said (not officially 😉) that the Bravia 9 II’s brightness should be almost identical to their professional director’s monitor BVM-HX3110, priced at astronomical sums. Our lab tests confirmed they weren’t empty promises. In synthetic measurements on the L20 test pattern the TV easily exceeded 4000 nits of peak brightness. More importantly, these impressive results translate directly to real film scenes. In most of the demanding shots we tested the screen consistently held brightness around 2500 to 3000 nits. Whether the light was small and pinpoint or flooded almost the entire screen, the HDR effect was incredibly intense.

Colours

Colour is another key pillar of RGB Mini LED technology (Sony’s True RGB implementation). For testing this type of panel we’ve permanently added a new research section to check how TVs handle colour in real-world conditions. Traditional synthetic-chart tests are no longer enough to determine real gamut coverage. From now on we also measure colour saturation directly in selected film scenes by overlaying measurement points. So how do the colours perform?

In synthetic tests the Bravia 9 II posts excellent results. For the popular DCI-P3 space used for HDR, colour-gamut coverage was almost 98%, while for the extremely wide and demanding BT.2020 space our measurements showed nearly 90%. However, in real-world, varied scenes those values drop by a few percentage points. This is directly due to the nature of zoned RGB backlighting. When differently coloured elements or bright white points appear next to each other, light from adjacent zones begins to mix slightly, producing a whitish backlight. This, of course, affects colour saturation, slightly reducing it. It shows that despite Sony’s brilliant algorithm controlling the RGB diodes, that number of zones is too small to eliminate the effect completely.

Is this a reason to complain? Of course not. The Bravia 9 II’s final colour coverage is the same as that of a very good QLED TV, and it’s important to remember: the vast majority of films and TV shows distributed in HDR use the DCI-P3 gamut. In that standard Sony easily maintains very high colour saturation, regardless of the scene.

We tested the U7S Pro, as we always do, in the best factory-tuned picture mode, Filmmaker Mode. The displayed colours can be judged in two ways. The most disappointing was the profile intended for SDR viewing, i.e. classic TV, YouTube and other less demanding content. The image there had a distinct yellow cast, which proved to be a direct result of an incorrectly set white balance. As our charts show, this involved a huge deficiency of the blue component, which drastically affected the overall colour temperature. You can see this clearly on the ColorChecker charts and on the colour palette graphs themselves, where most samples drifted towards yellow. Fortunately, the factory HDR mode performed much better; there the colour errors hovered around a Delta E of 3, which is a really solid result.

Contrary to expectations and high hopes, the Bravia 9 II we tested straight out of the box showed some issues with its factory calibration. Looking at the white balance charts, you can see it isn’t perfect. In SDR content it mainly lacked the red component, so the picture leaned toward cooler, bluish tones. By contrast, white balance in HDR looked much better in that respect. So where do the visible errors in image reproduction come from? They stem from an unexpected tuning of the gamma and the EOTF curve. In both cases the Bravia 9 II straight from the factory showed a clear deviation from reference standards.

In SDR content the gamma was significantly too high, at times running very close to 2.8 instead of the reference 2.4. In practice this meant the image was artificially dark and appeared washed out of colour, with details in dark areas (the shadows) completely lost. The opposite was true in HDR material, where brightness reproduction is handled by the EOTF curve. That curve was pushed too high above the correct value, which resulted in the picture being artificially brightened across most luminance ranges. As with every TV we test, we also subjected this unit to professional calibration. You can see the results and how we managed to correct those factory errors below.

We do know, however, that the company Hisense is capable of much more – as previous generations have proven – which is why we simply couldn’t leave the factory flaws of the U7S Pro model unaddressed in everyday content. As always in such cases, we had the television undergo professional calibration. The conclusions? This process brought about a colossal change. After manually adjusting the white balance and compensating for deficiencies in the blue component, the annoying yellow tint disappeared as if by magic. White became naturally clean, and skin tones gained the proper, healthy hue. Importantly, the calibration not only tamed the capricious SDR mode but also maximised the potential of the panel, reducing average colour reproduction errors to values nearly imperceptible to the human eye. The only thing we need to criticise after the whole process is the very nature of the Mini-LED backlighting and its specific interaction with the HDR signal. The aggressively tuned local dimming algorithms significantly interfere with the EOTF brightness curve. As a result, the backlighting doesn’t always work perfectly with the creator’s intent – depending on the scene being watched, the curve can noticeably run either above or below the reference, occasionally disrupting the ideal dynamic of HDR images.

Fortunately, with professional calibration, most of the factory shortcomings of the Bravia 9 II can be effectively eliminated. We managed to precisely correct primarily the white balance and the gamma and EOTF curves. After those adjustments, in everyday use and during movie sessions the TV looks vastly better. The image gained proper dimensionality, the cool tint to the whites disappeared, and shadow details that had previously been lost due to excessively high gamma finally became clearly visible. Although we ultimately assess colour accuracy as very good, as specialists we must point out one fairly serious design flaw in this model. The Bravia 9 II could look even better if it weren't for the complete lack of an advanced colour management system in the TV's menu.

While a basic white balance correction can be carried out here without issue, the settings lack options for adjusting specific colours. We tried to tackle this from every angle, both using the traditional method from the remote and with dedicated calibration software for Bravia TVs. Unfortunately, that function has been entirely locked. We suspect this may stem from the specifics of the new RGB architecture, which imposes these limitations. It's a real shame, because without it you can't fine-tune colour reproduction to perfection. The inaccurate red, for example, still stands out. Let's hope Sony will fix this shortcoming over time via an update.

The digital processing of lower-quality signals is at a very high level here, and that's all thanks to the MediaTek Pentonic 800 processor used in the U7S Pro. The upscaling itself also performs well, meaning the TV's ability to upscale lower-resolution signals to 4K is impressive. We didn't notice any unnatural, overly sharp contours on the screen, and our test image of the model simply looked attractive.

Digital processing and upscaling have long been Sony's forte, and after testing the Bravia 9 II we can confidently say that nothing has changed in this area. Sony remain at the top of the market. Their proprietary XR image processor, which in this model works together with the main MediaTek Pentonic 1000 chip, deserves the highest praise. That combination delivers excellent results. Upscaling lower-resolution content is extremely effective and precise.

However, what earns the most praise in the XR processor's performance is its tonal transition smoothing function. The system can reduce posterisation in heavily compressed material to practically zero. Crucially, the algorithm does this in a very intelligent way. It removes only the irritating digital 'steps' in gradients (banding), but does not blur fine texture detail or create an artificial, 'plastic' look lacking film grain. The image remains sharp, natural and cinematic.

The Hisense U7S Pro uses a panel with a maximum refresh rate of 165 Hz at 4K, and in gaming mode it can even hit 330 Hz at Full HD. However, it's worth remembering that these top figures don't mean much in everyday use, because most content still runs at a maximum of 120 Hz (for example when playing on a console). Even so, the TV handles motion quite well and performs respectably for an LCD design.

There isn't much to fault when it comes to smoothness. In the menu you'll find a motion smoothing feature called "Motion Enhancement", which hides two sliders: blur reduction and judder reduction. They let you manually tune the smoothing, which works well for both films and sport, effectively improving the raw TV signal.

In the specifications for the Sony Bravia 9 II you won't find dizzyingly high screen refresh rates above 120 Hz, which some more demanding PC gamers might see as a drawback. However, in everyday use — whether during film sessions, playing console games or watching sport — it's really hard to criticise the motion smoothness. The VA panel used here does exhibit some slight, natural smearing typical of this panel type, but the excellent Motionflow smoothing algorithms come to the rescue. The system menu includes sliders for blur reduction and smoothing that let you precisely tune the motion characteristics to your own preferences.

If you're planning to connect a console or PC to the U7S Pro, you'll be more than pleased – this TV is great gear for gamers. Hisense hasn't held back, featuring 4 HDMI 2.1 ports with full bandwidth of 48 Gbps. So you don't have to juggle cables, as each port will handle the full suite of features. We have an automatic game mode (ALLM) and VRR, which operates over a wide range from 48 Hz to a whopping 330 Hz. Of course, that 330 Hz is currently just a gimmick for owners of powerful PCs, as consoles will cap at 120 Hz, but it's good to have that headroom for the future. The Game Bar also works really well when gaming. It's a handy menu bar for gamers, where you can quickly change the picture mode, turn on a crosshair in the middle of the screen, and even switch the display aspect ratio to ultra-wide, which PC simulation fans will appreciate. The only downside worth noting is the incorrect implementation of the HGiG format in games. The issue is that the TV ignores instructions from the console regarding the image generated in HDR10 and constantly butts in, trying to "enhance" the image in its own way. This makes proper HDR configuration in the console menu (where brightness is set on the logo/checkerboard) a bit more challenging.

Aside from the fairly serious design oversight of limiting the platform to just two full HDMI 2.1 ports, the Bravia 9 II offers almost all the key gaming features available on the market. Sony has already accustomed us to such a rich feature set in its previous designs. The list of supported technologies here is extensive. It includes automatic low-latency mode (ALLM), variable refresh rate (VRR), as well as a fully compliant implementation of the HGIG standard and Dolby Vision tailored specifically for gamers.