TCL X11L vs LG OLED B6

Such a large number of zones translated not only into deep, inky blacks but also into the panel’s brightness. The X11L is an extremely bright TV. Peak brightness can easily exceed 4000 nits, and with the special "Boost" mode enabled, under specific conditions that brightness can even hover around the marketing figures of 9000–10,000 nits. This is undoubtedly one of the brightest, if not the brightest, screens on the market. But how do those numbers translate to real-world movie measurements? The results are very good, though of course far from the marketing promises. Our measured brightness in actual movie scenes hovered around 2000–3000 nits. That’s an outstanding result, considering that the vast majority of content is produced to those brightness levels, including the rarer material mastered to 4000 nits. But it also shows that the numbers the manufacturer brags about don’t always translate directly to the video content available at home. The only "quirk" (if you can call it that) is that when very small, bright elements appear on the screen, their brightness drops below 2000 nits. The dimming algorithm does this deliberately to preserve deep blacks and minimize halo. This is entirely understandable and the effect remains very strong, but it also demonstrates that even with such powerful hardware, Mini-LED technology has its limits and does not always work without compromise. In HDR, brightness isn’t the only thing that matters; color saturation and color accuracy do as well. On the X11L these are very good thanks to the new Super QLED quantum dots (SQD). The addition of a newly applied filter delivered excellent coverage of the P3 color gamut and the ultra-wide BT.2020. Although it doesn’t reach the advertised 100% of BT.2020, values around 89–90% can be called excellent. Colors are not far off those of RGB Mini-LED panels. We can even say they’re more stable because they use a less demanding algorithm than the one RGB screens often have to deal with.

The LG B6 is a moderately bright OLED. After calibration it reaches about 800 nits, roughly 200 nits more than last year’s B5. That’s thanks to the new budget OLED SE panel from LG Display. In practice it simply gives a bit more headroom and makes HDR in many scenes look fuller than on last year’s lower-tier OLEDs. That doesn’t mean the B6 has no limits. In very bright shots, when a large part of the screen is strongly lit, brightness can drop below 400 nits. This behavior is typical for OLED TVs (especially those from this segment) and that’s when you see the biggest difference versus more expensive models. All things considered, we rate the B6’s results as really solid. It’s still not a TV for breaking brightness records, but the HDR effect is strong enough that you can really feel the step up from ordinary SDR in films.

Color gamut

Using the OLED SE panel has slightly affected wide color gamut coverage. Compared with last year’s model, results fell by a few percentage points. DCI-P3 reaches about 96%, and BT.2020 around 71%. That doesn’t mean the colors on the LG B6 are weak. In most movies and series they look lively, well saturated and simply pleasing to the eye. You only notice a difference in very bright, highly colorful scenes. Then colors lose some intensity compared with QD-OLED panels. This comes from the WOLED panel construction. Besides red, green and blue subpixels it also uses a white subpixel that helps boost brightness. It comes at a cost: at very high luminance some color is effectively “diluted” by the white light, so saturation of some colors can be slightly lower. In everyday use this isn’t a big issue, but you can notice it in the most demanding scenes.

When you enable the supposedly best Filmmaker Mode, you expect a one-to-one image of what the director saw. On the X11L it's pretty good, but the mode has obvious flaws that our measurements immediately exposed. Let's start with SDR. Both the white balance and the gamma are simply misaligned here. The whites have too much blue and red, giving a faint pink tint. That also hurt the gamma, which instead of holding the cinematic 2.4 runs closer to 2.2. What did that result in? The whole image ends up pushed and artificially brightened. The worst is saved for last: the HDR measurements. Apart from that slight white balance drift, the X11L fails on the brightness management curve called the EOTF. What we saw in the measurements instantly explains what we noticed earlier in the films. The image is unnaturally bright because the curve is massively overshot above the reference. The TV simply and ruthlessly lifts the dark parts of the image to create a "wow" effect, completely ignoring the director's intent.

We tested the LG B6 in Filmmaker Mode, which is the best picture setting available right out of the box. ISF modes deliver very similar results, but in our tests we always stick to Filmmaker Mode for better comparison with other TVs. Each of those modes is, after all, a much better starting point than Vivid or Eco mode, where the picture is heavily boosted and noticeably less natural. With SDR content, the factory settings perform really well. Color errors are small, gamma behaves properly, and the image looks natural during ordinary viewing and does not seem overly "pumped up." It's a bit worse with HDR. When you play that kind of content you can quickly see that the white balance hasn't been set perfectly. Too much blue and red causes the image to shift toward a slightly pink tint. This is also confirmed by measurements of the color gamut and the ColorChecker, where samples clearly drift in that direction. It's not a flaw that completely ruins the picture, but you can notice it in HDR films. So people who care about the most faithful image should consider the calibration we describe later in the review.

After a professional calibration we were above all able to fully tame the SDR signal. The X11L responded perfectly to our adjustments. We were able to completely straighten the white balance, eliminate that pink tint, and set gamma to a stable 2.4. After that treatment the picture finally became consistent with the director’s intent, natural and free of artificial boosts. For HDR we also managed to make minor corrections, but the TV’s biggest flaw remained unchanged. I’m talking, of course, about how the X11L manages its brightness and how badly it overshoots the EOTF curve. Unfortunately, TCL provides virtually no tools to manipulate this parameter. Even during professional calibration the software offers no way to tame that curve, so the TV will always tend to brighten the image in HDR.

During calibration we focused primarily on HDR content, because that's where the factory settings required the biggest corrections. We didn't neglect SDR mode, though, which after adjustment was brought almost to perfection. Colors are very accurate and brightness is handled as it should be. The biggest improvement in HDR came from correcting the white balance. After removing the excess red and blue, the pinkish tint disappeared and the image became much more natural. Skin tones, whites and all colors that had been shifting toward magenta improved. After calibration most errors fell below a Delta E of 2–3, the threshold at which the average viewer stops noticing differences with the naked eye. The LG B6 can therefore deliver a very accurate image, especially for the manufacturer's entry-level OLED model.

Like in the C8L model we tested earlier, TCL has delivered a substantial upgrade in its flagship X series in this area. It's all thanks to the MediaTek Pentonic 800 processor used in this model. Thanks to it, features that smooth tonal transitions or even upscale content to higher resolutions finally look the way they should. The biggest Achilles' heel of previous TCL models has finally been addressed. The processor excels at digital processing, and in this respect the TV no longer lags behind flagship models from Korea or even the most refined ones from Japan.

The LG B6 handles lower-quality sources very well. Much of the credit goes to effective digital image processing, which can mask some source imperfections without overly smoothing the whole scene. The feature "Smooth Gradation" proves particularly useful. It can significantly reduce posterization, which we mentioned earlier, especially in darker areas of the image. The safest choice remains Low or Medium. The function still effectively smooths harsh tonal transitions, but does not yet interfere too much with fine details. The most dedicated purists can, of course, leave it off. Upscaling to 4K also performs very well. Full HD and 720p content retain a good amount of detail, and the image is neither overly sharpened nor excessively blurred. Some limitations become noticeable only with very poor sources below 720p, where the smallest subtitles and fine elements are not always perfectly sharp, but this is true for almost every other TV on the market.

In terms of specs, the X11L can impress: it supports refresh rates up to 144 Hz at 4K, and at Full HD it can be pushed to 288 Hz. But from a real-world perspective, we were most interested in how the screen handles 120 Hz. After all, modern hardware is limited to that rate, led by current-generation consoles. How does it perform in practice? Although it uses a VA panel, the screen doesn't exhibit heavy ghosting. With very fast-moving objects you can notice a slight smear, but it's subtle enough that it doesn't stand out when gaming or watching sports. The motion smoothing feature called "Motion Clarity" is also very helpful; it lets you adjust motion smoothness to your liking. Recommended settings are shown in the photo.

One of the biggest advantages of OLED panels is their very fast pixel response time. This keeps the image sharp and prevents the visible smearing that often appears on LCD TVs. However, there is a downside. During slow camera pans, motion can look more choppy than on LCD screens, where the slower panel naturally masks some of that effect. Fortunately, on the LG B6 you can easily soften this with TruMotion. With the motion smoothing properly adjusted, you can achieve smoother motion without giving the picture an excessive soap-opera effect.

For gamers the X11L is simply a superb screen. TCL has already gotten us used to the fact that its products deliver practically every feature available on the market, and it's exactly the same with the flagship from the X series. Thanks to the new processor, the X11L offers four HDMI 2.1 ports with the full 48 Gbps bandwidth. Naturally, the 2.1 standard brings a set of extremely useful options, such as Auto Low Latency Mode (ALLM) and VRR frame synchronization, working across the full refresh range up to 288 Hz. All of these features can be conveniently controlled from a dedicated Game Bar. Interestingly, its appearance can be customized to your taste, with three ready-made themes referencing Nintendo, PlayStation, and Xbox consoles. And speaking of Xbox: Dolby Vision Gaming also works on the X11L without any problems.

When gaming in the standard HDR10 format, however, you should be aware of the specific tuning of the brightness curve, which can cause problems during initial setup. Although the TV supports HGiG, configuring everything through the PlayStation or Xbox system menus can be tricky. The screen's algorithms tend to artificially brighten the test checkerboard pattern, making it really hard to hit the correct white clipping point by eye. For HDR10 content to look right, we recommend manually setting the brightness in the console menu to around 2500–3000 nits.

LG OLED B6 offers a powerful set of advantages for gamers; it's simply a complete platform for PS5, Xbox Series X/S, or a solid PC. It has four full-size HDMI 2.1 ports with 48 Gbps bandwidth, so you can skip the annoying cable swapping when you want to connect several newer devices at once. We get the full suite of sync technologies – from classic VRR to G-Sync and FreeSync. The screen seamlessly matches the refresh rate to the frame output produced by the console or graphics card. Of course ALLM is included: the B6 automatically detects a running game and immediately cuts input lag to a minimum. HDR handling is also excellent. The TV supports Dolby Vision, and a properly implemented HGiG standard means that after an initial calibration in the console settings the picture won’t suffer from blown-out highlights or lost detail in bright areas. The cherry on top is the Game Bar. Instead of digging through the full menu during gameplay, one click lets you adjust shadow visibility, tweak selected settings, or simply check the display’s current operating mode. All of this makes the LG B6 a great choice for gamers.