TCL C75B offers many picture modes, but in our opinion, the best choice is the "Film" mode. Although its settings are quite good, the television struggles with certain color reproduction issues. In tests, we noticed that the image had a noticeably pinkish tint compared to what could be considered correct. This effect was particularly noticeable in skin tones, which appeared unnaturally warm. The main culprit of this phenomenon turned out to be the white balance, characterized by an excessive amount of blue and red in both HD and 4K HDR materials.
Another issue was the way brightness was reproduced. The gamma, which is responsible for the visibility of details in darker materials, was definitely boosted, causing details in the darkest parts of the screen to be invisible, lost in total blackness (e.g., the bottom part of the screen in the comparative photo - the area around the actress's ear). Similarly, the situation was reflected in the EOTF curve, which was below the correct value, suggesting that a similar problem may be encountered in 4K HDR content.
Thanks to our experience and the appropriate tools, we decided to take matters into our own hands and see how much could be extracted from this model after professional calibration. Details are described in the next section.
In Film mode the TCL P7L performs fairly well without major adjustments, especially with typical SDR material. The white balance is relatively even, although as brightness increases there is a slight rise in red and blue and a bit of a shortage of green. This does not produce a strongly noticeable tint and most colors remain close to their reference points. The ColorChecker confirms this, with a large portion of errors falling below a level that would notably bother viewers during normal watching. We have more concerns about the gamma response. In the darkest parts of the image the TV runs it noticeably above the reference, so some shadow detail can be a little too dimmed. The curve then settles and for much of the range it is close to the intended target. As a result SDR generally looks natural, but in dark scenes the P7L can lose some subtlety. In HDR the factory setting is less precise. As brightness increases an excess of blue becomes more pronounced, making the image look cooler than it should. The number of larger color deviations also grows, particularly in brighter hues. The EOTF curve itself is handled fairly conservatively, with the TV showing the image darker than the reference over a large portion of the range. For a budget model, however, the factory Film mode settings are not bad.