TCL C69K / Q6C vs TCL P7L / P79L

In terms of brightness, TCL C69K / Q6C is a moderate model. Under optimal movie conditions, it shows its full potential, reaching a maximum of around 600 nits. In scenes with large, intense light sources, the HDR effect can be truly satisfying, providing a cinematic sparkle. However, it should be noted that when managing the backlight zones, there are situations where some elements of the image become dimmed, and sometimes they are barely visible. This suggests that there is still a lack of proper optimization of algorithms, though considering the technical parameters in this price range, the construction still looks very good.

The biggest limitation of the TCL P7L in HDR is simply brightness. The TV doesn't have a large luminance headroom, so strong highlights, sunlight, or small light sources can't clearly "pop" out of the image. As a result, even well-produced HDR material looks fairly restrained and in terms of dynamic range is closer to good SDR than to what brighter models show. That doesn't mean the P7L can't handle HDR at all — the issue is mainly a lack of sufficient backlight power.

Looking at color, the situation is a bit better. The TV covers about 91% of the DCI-P3 gamut and about 68% of the wider BT.2020 color space, so for its price class the color range is quite decent. TCL markets this model as QLED, though the nature of the solution used is closer to a PFS phosphor-based backlight than a classic quantum-dot layer. What matters most to viewers, however, is the result: more saturated colors are available.

The Filmmaker mode, which has arrived in this year's TCL televisions (including the C69K / Q6C), is definitely the best choice "to start with." This is the mode we recommend for everyday viewing of movies and series. Unfortunately, as is often the case, best does not mean perfect. In SDR content, the image turned out to be too warm, with a strong red tint in the white balance. We had the opposite impression with HDR content – here the image became cooler than it should have, due to an excess of blue color. Additionally, the brightness characteristics sometimes resulted in overexposure. In practice, this translated to quite noticeable errors in color tests, which is hard to accept in a mode labeled as “by the creators.”

In Film mode the TCL P7L performs fairly well without major adjustments, especially with typical SDR material. The white balance is relatively even, although as brightness increases there is a slight rise in red and blue and a bit of a shortage of green. This does not produce a strongly noticeable tint and most colors remain close to their reference points. The ColorChecker confirms this, with a large portion of errors falling below a level that would notably bother viewers during normal watching. We have more concerns about the gamma response. In the darkest parts of the image the TV runs it noticeably above the reference, so some shadow detail can be a little too dimmed. The curve then settles and for much of the range it is close to the intended target. As a result SDR generally looks natural, but in dark scenes the P7L can lose some subtlety. In HDR the factory setting is less precise. As brightness increases an excess of blue becomes more pronounced, making the image look cooler than it should. The number of larger color deviations also grows, particularly in brighter hues. The EOTF curve itself is handled fairly conservatively, with the TV showing the image darker than the reference over a large portion of the range. For a budget model, however, the factory Film mode settings are not bad.

Through white balance adjustment, we were able to significantly reduce the tendency of C69K / Q6C to distort colors, which resulted in a very good final outcome. After calibration, the issue of excessive warmth in SDR scenes and overly cool images in HDR disappeared. However, it is worth closely analyzing brightness characteristics. While there are few complaints about SDR content - the image looks really good, especially in older movies, TV programs, or on YouTube - the situation is much worse with HDR content. Analysis of the EOTF curve suggests that everything is fine, but in practice (EOTF in films), the limitations of the design become apparent. This model tends to excessively brighten small parts of the frame, while in other situations it dims the entire scene too much. The effect of calibration is undeniable, and in terms of color accuracy, C69K / Q6C gains a lot. Unfortunately, certain limitations resulting from local dimming management simply cannot be overcome.

After calibration, the TCL P7L can deliver a really pleasant picture, especially with classic SDR material. We managed to very effectively even out the white balance, and the gamma curve now tracks close to the target value of 2.4. You can also see this in the color measurements, as most errors dropped noticeably, and in everyday viewing it's hard to find any strongly visible inaccuracies. Movies, series, YouTube, or regular TV therefore look more natural, without unnecessary warming or a cool cast. For a model in this price range, the result in SDR is really very good.

With HDR the situation gets more complicated. Calibration helped improve the white balance and tidy up some deviations, but here the panel's limitations become increasingly apparent. The P7L has relatively low brightness and can't maintain appropriate luminance for more saturated colors, so some errors remain even after careful tuning. In other words, settings can improve how the TV interprets the signal, but they can't overcome its physical capabilities. That's why calibration makes the most sense for this model primarily with SDR.

In terms of image scaling, TCL C69K / Q6C performs quite well. Lower quality content is displayed acceptably, and thanks to the lack of overscan issues, the image is presented in full without any cropping. However, one shouldn't expect miracles – very low-quality materials won't gain a new life here, as the image processor has its limitations.

On thin lines and details, one can see characteristic jitter, indicating a lack of more advanced image enhancement algorithms. It's also a pity that the C69K / Q6C lacks the function for smoothing tonal transitions. As a result, in older movies or video materials, color banding can be noticeable and may become distracting during longer viewing sessions.

In this regard the TCL P7L performs surprisingly well, especially for such an inexpensive TV. The tonal transition smoothing feature, which in many budget models does little or almost nothing, actually manages to improve the picture here. It doesn't remove all banding completely, but it can noticeably reduce posterization and make trickier gradients look more natural. At this price point that's a genuinely pleasant surprise.

Upscaling itself also performs well. Lower-resolution material is scaled correctly, without excessive sharpening or adding artificial outlines around objects. Of course the P7L won't turn a very poor source into 4K-quality footage, but for regular TV the result is simply solid. For a model in this class there is little to criticize.

The use of a 144 Hz panel in TCL C69K / Q6C is a significant advantage in this price range. It represents an important step forward compared to its predecessor (C655 PRO), which only offered 60 Hz at 4K. The difference is particularly noticeable when watching sports or playing games – the ball, players, or dynamic action in games are displayed more clearly and without losing details. An interesting feature is also the ability of the panel to operate at 240 Hz (which the manufacturer does not officially mention) – we will return to this topic in relation to the PC gaming mode. TCL has also added a feature for movie fans: “Motion Clarity.” This allows users to adjust the picture to their preferences using two simple sliders. We can either keep the visible film frame or opt for very smooth, "

The TCL P7L uses a panel with a native 60 Hz refresh rate at 4K resolution, and that's how it should be treated in everyday use. For movies the TV mainly offers frame interpolation, so it can smooth motion and reduce the typical judder, but it does not deliver the smoothness of true 120 Hz panels.

TCL C69K / Q6C is a television that can boldly be called equipment created with gamers in mind. Here we have 4K at 144 Hz, VRR support, automatic game mode (ALLM), and Dolby Vision Gaming. Additionally, there's a practical Game Bar, which is a panel with the most important settings right at hand – useful when we want to quickly change something during gameplay (e.g., aspect ratio: Yes, it’s possible!). The wide range of VRR, reaching up to 240 Hz, is noteworthy. This option is primarily for PC gamers who will lower the resolution below native 4K. In that case, the TV can spread its wings and show additional smoothness, especially in fast esports titles. For consoles, we stick to the classic limit of 120 Hz, but the possibilities are still quite broad. The only drawback is slight motion blur that can sometimes be seen in dynamic scenes. Other than that, C69K / Q6C offers everything gamers expect from a television.

For such an inexpensive TV, the P7L has quite a lot to offer gamers. It has ALLM, VRR, Dolby Vision for gaming, and TCL adds its Game Bar, which lets you quickly view key information or change some settings without leaving the game. Not everything is perfect, though, because HGiG doesn't work here as it should, but at this price point it's hard to complain much about the feature set. The most interesting thing starts when you give up on 4K. At that resolution the TV runs at a maximum of 60 Hz, but at 1440p and 1080p it can already display at 120 Hz. And that's not just a spec-sheet curiosity. In fast-paced games that support that frame rate you can really notice the difference in smoothness, so if you care more about smoother motion than maximum image sharpness, that mode can make a lot of sense. Of course that doesn't make the P7L a true 120 Hz TV. Even so, it's precisely those extra modes that make the P7L perform really well for gaming.