Sony BRAVIA 7 II vs Hisense U7S / U77SE

The Sony Bravia 7 II handles HDR very well and, above all, is simply a bright TV. In the proper "Professional" viewing mode we measured about 2000 nits of peak brightness, so the panel's capabilities are really substantial. Of course, with Mini-LEDs the result on a test pattern is only part of the story, because a lot depends on how the TV controls the backlight in real scenes. And here Sony's algorithms perform really well. Depending on the scene, the brightness we measured in movies ranged from around 1100 up to 1700 nits. That's already a level at which HDR has the proper punch and bright effects can really impress. It's not perfect in every situation, though. With small bright elements on a very dark background the Bravia 7 II clearly prioritizes maintaining good black levels, which can cause their brightness to drop to around 500 nits. It still looks good, but you can see the TV doesn't always operate without compromises.

Colors

The second thing that has a huge impact on the HDR effect is, of course, color. And this is where True RGB technology was supposed to bring one of the biggest changes. Looking at the panel's raw capabilities, the Bravia 7 II performs very well. We measured about 98% DCI‑P3 coverage and 88% BT.2020, so the potential to display highly saturated colors is really large. However, in RGB TVs the situation is a bit more complex. When we performed the same measurements with a movie background applied, the gamut coverage dropped to about 92% DCI‑P3 and 78% BT.2020. Those are still good figures, especially for an RGB Mini-LED TV, but they clearly show that the final result largely depends on how the algorithms control the three backlight colors. In most scenes the Bravia 7 II handles this well and colors retain high saturation. The biggest differences are seen in shades of blue, where samples start to deviate more noticeably from the reference values and coverage is weaker than for the other primary colors. So True RGB does offer real additional possibilities here, but like with brightness, much depends on what is actually happening on the screen.

The Hisense U7S has considerable HDR potential, but it can't use it in every scene. On a test pattern it reaches around 1,100 nits, so the backlight itself is very strong. In our brighter film scenes we measured about 640 to 745 nits. That's still enough for the sun or bright highlights to have a noticeable glow and to show an advantage over SDR material. When the TV needs to illuminate a larger portion of the image, it does quite well.

The problem appears with small lights on a dark background. Each of the 192 zones covers an area much larger than a tiny point on the screen. If the TV were to strongly light such a zone, it would also brighten the surrounding area along with the light. Hisense tries to avoid that and dims the entire zone. Black levels therefore look better, but a small bright object that should draw the eye also loses intensity. That's why in two tougher scenes we recorded only 297 and 154 nits. The difference is large: in one shot HDR can impress, and in the next small lights are noticeably muted. The U7S therefore prioritizes maintaining deep blacks, even at the expense of bright details. With this number of zones that's an understandable compromise, but it's worth remembering — the 1,100-nit peak tells us about the backlight's capability, not how brightly the TV will render every element of a film.

Colors

Hisense calls the U7S ULED, but that's a marketing name; the wider color gamut here comes from a PFS phosphor backlight. In our measurements the TV covered about 91% of DCI-P3 and 71% of BT.2020. Those are good results, although it falls short of the best screens on the market. The biggest shortfall is in green — the TV doesn't even reach the DCI-P3 target there, so the most saturated shades will be less intense than they should be. Most colors in HDR films and series, however, still look suitably rich. A positive is the repeatability of the results. Gamut coverage on test patterns and in film scenes is practically identical.

To evaluate the out-of-the-box colors we chose Professional mode, because it performs best among the available settings. It's not perfect, though. In SDR the white balance leans slightly toward magenta, so some scenes look a bit warmer and less neutral than they should. A bigger issue is the gamma, which sits closer to 2.5 than 2.4. That makes the image a bit too dark in places, especially in the midtones. In HDR the situation is better. As brightness increases there is a bit too much red, but it's not a fault that stands out during viewing. Overall, Professional mode is a good starting point, although you can get a little more out of it with calibration.

The out-of-the-box colors on the Hisense U7S are decent, but there are a few things to improve. In SDR there's a red bias in the white balance, which makes the image too warm and in places slightly pink. You can notice this on faces and on bright, neutral surfaces. Gamma also runs below the reference, so the TV brightens the image, especially in darker areas. That makes shadow details easier to see, but the scene loses some of its depth.

In HDR the white balance is a bit more even, but not completely neutral; midtones lack blue, and the brightest areas lack red. A bigger problem is how brightness is reproduced. The EOTF curve shows that a large portion of midtones is being brightened, so the image looks brighter than the source material intends. Color Checker measurements also perform worse than in SDR: many errors are around 3 to 4, and individual ones reach as high as 8. Colors can therefore look attractive, but they are not always faithful to what we should be seeing. There's room for improvement, and we'll check how much can be corrected with calibration.

After calibration the Bravia 7 II can look significantly better. First of all, we managed to set the white balance very well, both in SDR and HDR. Gamma can also be improved, and after correction it runs very close to the reference value. For most users, those changes will have the biggest impact on the picture. There is, however, a limitation when it comes to colors. On the Bravia 7 II Sony does not provide access to a classic CMS that would let us adjust individual hues separately. A lot is therefore left in the hands of the algorithms controlling the True RGB backlight. If the TV reproduces a specific color inaccurately, we are not always able to do anything about it. In our measurements this is most evident with some reds and blues, where errors can still be quite large. That does not, however, diminish the value of calibration. Correctly setting the white point and gamma strongly affects the overall image, so even without the ability to precisely tweak every color the difference compared with the factory settings is noticeable.

Calibration of the Hisense U7S helped most with SDR content. We managed to even out the white balance, so the previous warm cast is gone and whites and grays look neutral. Gamma is also now very close to the reference, and the TV no longer brightens the image unnecessarily, so darker scenes have regained depth. Color Checker measurements confirm the improvement: most errors fall below 2. That yields a really well-calibrated picture for regular TV and SDR movies. It didn't go as smoothly in HDR. The TV lacks an effective way to correct the EOTF curve, so Hisense still interprets the content's brightness a bit on its own. It brightens parts of the image and can dim the brightest elements depending on the scene and the local dimming behavior. Calibration couldn't eliminate this. It shows up in the Color Checker results as well, where many errors remain around 3–4 and individual ones exceed 7. So in SDR the result is very good, but in HDR we have to accept that the TV adds its own interpretation of brightness to the image.

Upscaling and digital processing are among the Bravia 7 II's strongest assets and one of Sony's biggest advantages over the competition. Sony has handled digital image processing well for years, and it shows here too. Above all, the "Smooth Gradation" function works very well; it can smooth weak tonal transitions in lower-quality content. It's safest to set it to Low, but we'd comfortably recommend Medium as well. The effect is stronger then, and the TV still handles details very delicately. Some fine detail may be slightly smoothed, but Sony does it much more subtly than many other brands. The upscaling itself also performs very well. Lower-resolution sources are well upscaled to 4K; the picture looks clean and retains a lot of detail. Of course the TV won't magically turn native HD material into true 4K, but the Bravia 7 II does a very good job with what can be extracted from such a source.

The handling of lower-quality material on the Hisense U7S is fairly mediocre. The Pentonic 700 chipset used here doesn't cope well with the effects of heavy compression. The menu includes a "Smooth & Gradient" picture option, but its performance leaves much to be desired. At the low setting it's hard to notice any improvement in tonal transitions, although at least the image isn't degraded. The medium and high settings still don't remove visible banding between shades and begin to smear details; in our test clips even parts of characters' faces disappeared. Interestingly, film grain remains untouched at every level. If you use this feature, we'd stick with the low setting. Its current behavior needs refinement, but that's mainly down to the processor used. Upscaling to 4K performs much better. Lower-resolution footage gains clarity, edges are well reconstructed, and fine elements look crisp. That doesn't mean it can recover details that weren't in the recording, but the TV makes good use of what it gets from the source. Another plus is that it doesn't crop the image edges, even with an SD signal.

The Bravia 7 II uses a 120 Hz panel, so in terms of motion smoothness it delivers everything you’d expect from a TV in this class. With sports or games at 120 fps the picture is appropriately smooth, and for movies Sony provides an advanced motion smoothing feature. You can adjust the level of interpolation separately and decide whether you want to keep a more cinematic motion or achieve noticeably smoother motion. The issue of motion blur is a bit worse. The VA panel used isn’t among the fastest, and you can notice a slight trail behind moving objects, especially on darker backgrounds. It’s not at a level that will be highly distracting during normal viewing, but last year’s Bravia 7 performed better in this respect and had a noticeably faster panel.

Motion handling on the Hisense U7S is pretty good thanks to the 144 Hz refresh rate. For movies we also have a motion smoothing feature that lets you adjust judder and blur reduction. You can therefore keep a more cinematic motion or increase smoothness if abrupt camera shifts bother you. In sports and games the high refresh rate is also useful, but unfortunately it doesn't solve this panel's biggest problem.

The culprit is pixel response time. Fast-moving objects leave long, noticeable trails, as our UFO test shows. It's worst on dark backgrounds, where the trail behind the object is especially pronounced. So motion can be smooth, but the moving object itself loses sharpness, and that difference on the U7S is fairly easy to notice.

The Bravia 7 II essentially has everything you'd expect from a good console TV today. It supports 4K at 120 Hz, VRR from 48 to 120 Hz, and ALLM, so when you start a game the TV automatically switches to low-latency mode. There's also a properly working HGiG, which means that after setting up HDR on the console the TV won't try to further brighten the image on its own. Just remember to turn off tone mapping in the TV's menu. Dolby Vision in game mode is another plus, especially for Xbox owners. Sony also includes its own Game Menu. From it you can quickly view key signal information, check VRR, or change gaming settings without digging through the TV's entire menu. The only thing missing from the feature list is support for 1440p at 120 Hz.

Our biggest complaint is not really with the features themselves, but with the connectors. The Bravia 7 II has four HDMI ports, but only two of them support full HDMI 2.1 at 48 Gbps. One of those is also an eARC port. So if you connect a soundbar or AV receiver via HDMI, in practice you have only one full HDMI 2.1 port left for a console or PC. With a single console that's fine, but with a PS5, an Xbox, and an audio setup it starts to get tight. That's hard to justify from Sony. Two HDMI 2.1 ports might be acceptable in cheaper TVs, but in a model of this class, especially in 2026, we'd expect all four ports to be HDMI 2.1.

The Hisense U7S has a lot to offer gamers. You get two HDMI 2.1 ports and support for 120 Hz at Full HD, 1440p, and 4K, so modern consoles’ capabilities are well used. When connected to a PC you can use 144 Hz at 4K or switch the resolution to Full HD and run 240 Hz. So there’s a wide choice, although it’s worth remembering the motion smearing mentioned earlier, which the high refresh rate does not eliminate. VRR and ALLM are also present. The first helps prevent tearing when frame rates in a game change. The second automatically switches the TV into game mode, so you don’t have to dig through the menu each time. VRR works from 48 to 240 Hz, with the highest refresh rate available in Full HD. Xbox users can also play in Dolby Vision, including at 120 Hz. Importantly, this format does not introduce significant input lag here. The Game Bar also looks very good. It’s easy to read, visually appealing, and lets you quickly check what signal the TV is receiving. There are also handy gaming settings at your fingertips, including shadow brightening. If it’s hard to spot an opponent in a dark game, you can improve visibility without digging through the entire menu.

Our biggest complaints concern HGiG. Hisense continues to do its own tone mapping, which makes setting HDR on the console confusing. You adjust a checkerboard test pattern and the TV continuously adapts how it looks. As a result, the moment the pattern disappears does not correctly indicate the screen’s brightness limit, and it’s easy to set the value too high. For this model it’s better to set the target HDR peak brightness on the console to about 900 to 1000 nits, rather than relying on the configurator.