Samsung R95H Micro RGB vs TCL RM7L

In terms of brightness the Samsung R95H shows that we’re still dealing with a top-tier TV, although the results aren’t always as spectacular as you might expect from a flagship Micro RGB model. In synthetic tests the TV can exceed 2,400 nits, so it definitely has plenty of headroom. Importantly, it can sustain high brightness even when bright elements occupy a larger portion of the screen. In real movie scenes the situation is a bit more complex. The R95H most often reaches around 1,000 to 1,400 nits, which still delivers a very good, strong HDR effect. Bright sunlight, reflections, or lights can look truly impressive, and the TV has enough power for HDR to be clearly distinguishable from regular SDR.

The problem appears mainly in very dark scenes with single, small light sources. Here the local dimming algorithm favors deep blacks and reducing the halo over maximizing the brightness of such elements. As a result, small lights can be noticeably dimmed. Overall HDR performs well, but not without limitations. The R95H has huge brightness headroom, especially in larger and brighter parts of the image, but in difficult, dark scenes its capabilities are mainly limited by how the local dimming operates.

Colors

Colors were meant to be the biggest revolution enabled by the RGB backlight, and the R95H does show considerable potential here. The assessment is not, however, as simple as synthetic measurements might suggest. On test charts the TV performs superbly. BT.2020 coverage reaches almost 94%, and DCI-P3 98%, so especially strongly saturated reds and greens can look really impressive. The picture changes a bit when, instead of test charts, we start measuring real movie scenes. Then BT.2020 coverage drops to about 87% and DCI-P3 to 93%. It seems that with more complex imagery the RGB zones are not always able to maintain the same high color saturation as on simple charts. They are still saturated, but the advantage of the new backlight is no longer as large as the manufacturer's numbers might suggest.

The TCL RM7L is a bright TV. In our measurements its peak brightness hovered around 1600 nits. That's clearly less than the C7L, which can approach 2600 nits, but in real movie scenes the difference between the two models isn't that big. In less demanding shots with many bright elements on screen, the RM7L can hold around 1000 nits, and sometimes a bit more, approaching 1500 nits. It performs worse in dark scenes with small highlights; then their brightness can fall to around 500 nits. However, this behavior is not accidental. The TV intentionally dims small elements to better control the backlight and maintain higher contrast. This comes at the cost of their intensity, but it's typical behavior for local-dimming TVs in a similar price bracket.

Color gamut coverage

In HDR it's not only brightness that matters, but also color. And here the RM7L has a lot to show. Colors are strongly saturated, and a wide color gamut is one of its bigger strengths. In measurements it reached about 96% of DCI-P3 and around 83% of BT.2020. It's worth remembering, though, that on a TV with this kind of backlight the result can vary depending on the scene. On test patterns colors look best, while in movies their saturation can be a bit lower than on SQD Mini LED or QD-OLED TVs. The backlight construction itself is also interesting. The RM7L doesn't use the classic red, green and blue diode set. TCL used two green diodes and one blue, and obtains the red color using a PFS phosphor. You can see this in spectrometer measurements, but it doesn't have a major impact on the picture. Colors are still produced correctly.

To assess factory color reproduction, we of course chose Filmmaker mode, the setting that's supposed to be closest to how the creators intended the image to look. Unfortunately, the R95H does not fully exploit the potential of its panel. The biggest issue in SDR is the gamma. The image is noticeably brightened across almost the entire range, which robs it of some depth and makes it look flatter than it should. The white balance isn't ideal either, as increasing brightness brings a red bias and a lack of blue, making the image too warm. This is especially visible in bright elements and skin tones, which can appear redder than they should.

It's similar in HDR. The EOTF curve sits above the reference value for much of the range, so the R95H again brightens the image compared with how it should look. Combined with the inaccurate white balance, this means colors here are not as precise as we'd expect from a TV of this class. The factory Filmmaker setup is therefore not one of the R95H's strengths. At first glance the picture may look impressive because it's bright and highly saturated, but in terms of fidelity to the source material there is still plenty of room for improvement.

We checked the factory colors in Filmmaker Mode, the best picture setting available to the user. TCL has been using it in its TVs for two years, and its purpose is to present the image as faithfully as possible in line with the creators' intent. On the RM7L this was indeed the best-calibrated mode, although it wasn't without flaws. The biggest issue was the white balance. An excess of red and blue caused the picture to take on slightly pinkish tones. This was visible in both SDR and HDR. Additionally, the luminance response was slightly boosted, which made the image appear a bit brighter but also less contrasty than it should have been.

R95H responds very well to calibration. In SDR we were able to set the white balance and gamma almost perfectly, and color errors dropped to very low levels. The difference compared with the factory settings is therefore considerable, and after calibration the picture looks much more natural. In HDR we can also improve a lot, especially regarding white balance and overall color accuracy. The issue of managing brightness and color saturation looks a bit different. Here, at some point we run into limitations resulting from the way RGB backlighting and local dimming work. Individual zones have to control both brightness and the color of the light at the same time, so in more demanding scenes it is not always possible to achieve exactly the same saturation and brightness that the TV shows on simple test patterns. Calibration simply can't completely overcome that. Despite this, after calibration the R95H delivers accurate image reproduction, and most of the errors we saw in the factory settings can be effectively eliminated.

Thanks to a fairly extensive calibration menu, we were able to correct the vast majority of the errors described earlier. The biggest change was to the white balance. After calibration it looks very good, so the image lost its pinkish cast and became much more neutral. The luminance response itself also improved. Both the SDR gamma and the HDR EOTF curve are now much closer to the reference values. The image is no longer unnecessarily brightened, and darker areas look more natural and have more depth. Better luminance accuracy also affected the colors, which after calibration are noticeably more accurate. Not everything could be set perfectly, though. In HDR material the RM7L still interprets part of the signal its own way and does not always follow the reference curve exactly. This is most apparent in some darker scenes, where the TV can either slightly lift the shadows or darken them completely. That was the source of the earlier impression of a slightly brightened, less contrasty image. Even so, the calibration delivers a very good result here. It removes the most visible errors and, above all, makes the image much closer to how it should look.

Samsung R95H uses the new Micro RGB AI Processor, but in practice we didn't notice a big leap compared to the NQ4 AI Gen2 or Gen3 chips found in the manufacturer's other TVs. The upscaling itself still performs very well. The image is appropriately smoothed, yet retains plenty of sharpness and doesn't look overly soft. That's definitely one of Samsung's strengths. It's just a shame that with very low-resolution content you still can't completely turn off overscan.

The processor also handles gradients well and can effectively smooth unwanted posterization. The noise reduction feature works very effectively, but you need to use it judiciously. At higher settings it can noticeably interfere with the image and even remove natural film grain. So it's best to use it only when the source material is actually heavily compressed.

Upscaling and digital image processing are not the RM7L's strong suit. TCL used a MediaTek Pentonic 700 SoC here, designated MT5896, which isn't among the best processors at handling lower-quality content. The biggest problems show up with heavily compressed material from YouTube or regular broadcast TV. The processor can't effectively hide posterization and the characteristic color banding. The feature meant to smooth them does little here, and it often interferes too much with the picture, smoothing faces or fine textures, for example. For that reason, it's best to simply leave it off.

Straightforward upscaling to 4K looks better. Lower-quality sources remain reasonably sharp and retain enough detail. It's not on par with the best processors on the market, but for everyday viewing the result is entirely acceptable.

The Samsung R95H has a 165 Hz panel, so its motion handling is excellent. At 120 Hz, like when gaming on a console or watching sports, motion blur is minimal, and when connected to a PC you can use the full 165 Hz to further improve motion clarity. However, keep in mind that it’s still a VA panel, so it doesn’t respond as instantly as OLED. You may sometimes notice a faint trail behind moving objects, but from a normal viewing distance this shouldn’t be distracting. For movies and series you can also use the adjustable motion smoothing. You can keep the more cinematic 24 fps look or gradually smooth the motion if you prefer a smoother image. Samsung gives you plenty of freedom here, and it’s easy to choose a setting that matches your preferences.

The RM7L uses a 144 Hz VA panel, so right out of the box it's a TV well suited for sports, gaming, and other fast-moving content. The high refresh rate also gives the motion interpolation engine more room to work, allowing it to generate extra frames. On the RM7L it works well, and with the right settings it can noticeably improve motion smoothness without causing an excessive soap opera effect.

When it comes to gaming the Samsung R95H is almost a complete TV. When you connect a PS5 or Xbox Series X you can use 4K at 120 Hz, VRR and ALLM, and the TV also works properly with HGiG. The only major omission is Dolby Vision Gaming, which Samsung, like with its other TVs, simply does not support. There's also the Game Bar, familiar from other Samsung models, which lets you quickly check frame rate, VRR status or the HDR format and change the most important settings without leaving the game. You can also brighten darker parts of the image or change the screen aspect ratio.

Samsung also offers Game Motion Plus, a motion smoothing feature designed specifically for games. It makes the most sense for games running at 30 fps, where it can noticeably improve smoothness and make camera movement look much nicer. Just remember this comes at the cost of higher input lag (about 60 ms), so it's not the best choice for online or faster paced games. It's also worth noting Gaming Hub, which lets you run some games directly from the cloud without connecting a console. In terms of features for gamers, it's hard to find any major omissions in the R95H.

You can say almost nothing but good things about the RM7L when it comes to gamer features. The TV supports ALLM, VRR, Dolby Vision Gaming and works correctly with HGiG, so it’s hard to point out any major omissions in that area. In practice this means automatic switching to low-latency mode, a smoother picture with variable frame rates, and accurate brightness reproduction in HDR games. There’s also a handy Game Bar. From it you can quickly check the frame rate, VRR status, signal format, and aspect ratio, and change key settings without leaving the game. TCL also added a few extra options, like a crosshair and brightening of dark parts of the image, which can be useful in some titles. The biggest downside comes from the use of the Pentonic 700 processor. Only two of the four HDMI ports support the full HDMI 2.1 standard. With a single console this won’t matter much, but when connecting two consoles and a PC you may run out of space. Especially since one of those ports may also be needed for eARC and a soundbar.