Samsung R95H Micro RGB vs Philips PQS9011 / PQS9001 (The One 2026)

In terms of brightness the Samsung R95H shows that we’re still dealing with a top-tier TV, although the results aren’t always as spectacular as you might expect from a flagship Micro RGB model. In synthetic tests the TV can exceed 2,400 nits, so it definitely has plenty of headroom. Importantly, it can sustain high brightness even when bright elements occupy a larger portion of the screen. In real movie scenes the situation is a bit more complex. The R95H most often reaches around 1,000 to 1,400 nits, which still delivers a very good, strong HDR effect. Bright sunlight, reflections, or lights can look truly impressive, and the TV has enough power for HDR to be clearly distinguishable from regular SDR.

The problem appears mainly in very dark scenes with single, small light sources. Here the local dimming algorithm favors deep blacks and reducing the halo over maximizing the brightness of such elements. As a result, small lights can be noticeably dimmed. Overall HDR performs well, but not without limitations. The R95H has huge brightness headroom, especially in larger and brighter parts of the image, but in difficult, dark scenes its capabilities are mainly limited by how the local dimming operates.

Colors

Colors were meant to be the biggest revolution enabled by the RGB backlight, and the R95H does show considerable potential here. The assessment is not, however, as simple as synthetic measurements might suggest. On test charts the TV performs superbly. BT.2020 coverage reaches almost 94%, and DCI-P3 98%, so especially strongly saturated reds and greens can look really impressive. The picture changes a bit when, instead of test charts, we start measuring real movie scenes. Then BT.2020 coverage drops to about 87% and DCI-P3 to 93%. It seems that with more complex imagery the RGB zones are not always able to maintain the same high color saturation as on simple charts. They are still saturated, but the advantage of the new backlight is no longer as large as the manufacturer's numbers might suggest.

Philips PQS9000 is a moderately bright TV; in our HDR scenes it reached roughly 450 to just over 500 nits. That's enough to notice a difference versus SDR. Sun reflections, lamps, and highlights have a bit more sparkle than on basic TVs, whose brightness often tops out around 300 nits. However, it’s not at a level where bright elements make a particularly strong impression. The biggest limitation remains contrast. Without local dimming, the TV raises the black level around a bright object when it brightens that object. That means there’s no clear separation between strong highlights and a dark background, and that contrast is what really shows off HDR. The PQS9000 offers more than the cheapest models, but despite decent brightness the effect stays fairly basic.

Colors

Philips deserves praise for the colors. Although the manufacturer labels this model QLED, a PFS phosphor is used here instead of quantum dots. That solution does not prevent good results, however. On test patterns and in measurements of film scenes we recorded about 94% DCI-P3 coverage and 75% BT.2020. For this class of TV that’s really good. In practice, it means the vast majority of colors used in HDR movies and series will have proper saturation. Lush greens and intense reds are not a major problem and add appeal to the picture. Limitations are easier to spot in some games and rarer content that uses the most saturated shades of the wide BT.2020 gamut. In those situations, displays with wider color coverage, such as SQD or RGB LED, can show more. In its price segment the PQS9000 has nothing to be ashamed of.

To assess factory color reproduction, we of course chose Filmmaker mode, the setting that's supposed to be closest to how the creators intended the image to look. Unfortunately, the R95H does not fully exploit the potential of its panel. The biggest issue in SDR is the gamma. The image is noticeably brightened across almost the entire range, which robs it of some depth and makes it look flatter than it should. The white balance isn't ideal either, as increasing brightness brings a red bias and a lack of blue, making the image too warm. This is especially visible in bright elements and skin tones, which can appear redder than they should.

It's similar in HDR. The EOTF curve sits above the reference value for much of the range, so the R95H again brightens the image compared with how it should look. Combined with the inaccurate white balance, this means colors here are not as precise as we'd expect from a TV of this class. The factory Filmmaker setup is therefore not one of the R95H's strengths. At first glance the picture may look impressive because it's bright and highly saturated, but in terms of fidelity to the source material there is still plenty of room for improvement.

Unfortunately, the PQS9000’s factory picture settings for Film mode need some fine-tuning. In SDR the biggest issue is an excess of red in the white balance, which makes whites, grays, and skin tones too warm, sometimes even slightly pink. On top of that, the gamma runs below the target across most of its range. The TV therefore brightens midtones and highlights, making the overall image look flatter than it should.

In HDR the white balance itself is much better. Aside from minor deviations, the components stay close to each other, so there isn’t the pronounced tint seen in SDR. However, the EOTF curve shows a slight brightening of parts of the image, and the biggest issue appears in measurements of the wide color gamut. Many hues deviate significantly from the reference, with errors reaching 8–9. So the good gamut coverage we praised earlier doesn’t mean the TV hits specific colors accurately. It can display a wide color range, but out of the box it doesn’t use it very precisely.

R95H responds very well to calibration. In SDR we were able to set the white balance and gamma almost perfectly, and color errors dropped to very low levels. The difference compared with the factory settings is therefore considerable, and after calibration the picture looks much more natural. In HDR we can also improve a lot, especially regarding white balance and overall color accuracy. The issue of managing brightness and color saturation looks a bit different. Here, at some point we run into limitations resulting from the way RGB backlighting and local dimming work. Individual zones have to control both brightness and the color of the light at the same time, so in more demanding scenes it is not always possible to achieve exactly the same saturation and brightness that the TV shows on simple test patterns. Calibration simply can't completely overcome that. Despite this, after calibration the R95H delivers accurate image reproduction, and most of the errors we saw in the factory settings can be effectively eliminated.

Calibration brought a big improvement, especially in SDR material. We managed to even out the white balance and remove the previous color cast, and the Color Checker measurements now look really very good. Colors are much closer to what should be on the screen, so with regular TV or SDR movies we can be satisfied with the result. Unfortunately HDR somewhat spoils that outcome. On one hand it's limited by the panel's capabilities, since calibration won't improve contrast or replace local dimming. On the other hand there are color errors we couldn't correct because the CMS settings, that is color management, were grayed out and inactive. For that Philips loses points with us. White balance can be fine-tuned, but without access to wide color gamut controls you can't correct colors in HDR as effectively. It's a shame, because the SDR results show the potential is there, it's just not allowed to be fully used everywhere.

Samsung R95H uses the new Micro RGB AI Processor, but in practice we didn't notice a big leap compared to the NQ4 AI Gen2 or Gen3 chips found in the manufacturer's other TVs. The upscaling itself still performs very well. The image is appropriately smoothed, yet retains plenty of sharpness and doesn't look overly soft. That's definitely one of Samsung's strengths. It's just a shame that with very low-resolution content you still can't completely turn off overscan.

The processor also handles gradients well and can effectively smooth unwanted posterization. The noise reduction feature works very effectively, but you need to use it judiciously. At higher settings it can noticeably interfere with the image and even remove natural film grain. So it's best to use it only when the source material is actually heavily compressed.

The digital image processing in the Philips PQS9000 performs well, though we have a few reservations. The "Distortion Reduction" function helps smooth tonal transitions in lower-quality material, but it works quite unevenly. It can improve a section of the picture, only to, moments later and still within the same scene, seem to lose effectiveness and reintroduce banding between shades. A plus is that it doesn't remove film grain or fine noise, so the image retains its texture. We found the "Medium" setting worked best, and that's the one we recommend. The 4K upscaling itself is acceptable, though the picture is very soft. Edges are heavily smoothed, which may make the image feel less crisp to some viewers. In that case, it's worth slightly increasing the sharpness in the TV's menu, as this will make edges stand out more. Don't overdo the sharpness slider, however, or you may introduce artificial halos instead of improving the picture.

The Samsung R95H has a 165 Hz panel, so its motion handling is excellent. At 120 Hz, like when gaming on a console or watching sports, motion blur is minimal, and when connected to a PC you can use the full 165 Hz to further improve motion clarity. However, keep in mind that it’s still a VA panel, so it doesn’t respond as instantly as OLED. You may sometimes notice a faint trail behind moving objects, but from a normal viewing distance this shouldn’t be distracting. For movies and series you can also use the adjustable motion smoothing. You can keep the more cinematic 24 fps look or gradually smooth the motion if you prefer a smoother image. Samsung gives you plenty of freedom here, and it’s easy to choose a setting that matches your preferences.

In terms of motion handling, the Philips PQS9000 performs outstandingly for an LCD TV. It's not just the 144 Hz refresh rate, but above all how quickly the panel itself responds. At 120 Hz you can hardly see the typical trailing smears behind moving objects. What's especially pleasing is that this also applies to darker backgrounds, where many VA panels clearly struggle. Here motion remains clear, and Philips pleasantly surprised us in that regard. To adjust how motion is displayed there is the "Motion Style" function. It includes two sliders: "Smoothness" and "Blur Reduction," which let you tailor the effect to the content you're watching and your personal preferences. Our suggested settings are shown in the photo. Treat them as a starting point and try different levels of smoothing to see which you prefer.

When it comes to gaming the Samsung R95H is almost a complete TV. When you connect a PS5 or Xbox Series X you can use 4K at 120 Hz, VRR and ALLM, and the TV also works properly with HGiG. The only major omission is Dolby Vision Gaming, which Samsung, like with its other TVs, simply does not support. There's also the Game Bar, familiar from other Samsung models, which lets you quickly check frame rate, VRR status or the HDR format and change the most important settings without leaving the game. You can also brighten darker parts of the image or change the screen aspect ratio.

Samsung also offers Game Motion Plus, a motion smoothing feature designed specifically for games. It makes the most sense for games running at 30 fps, where it can noticeably improve smoothness and make camera movement look much nicer. Just remember this comes at the cost of higher input lag (about 60 ms), so it's not the best choice for online or faster paced games. It's also worth noting Gaming Hub, which lets you run some games directly from the cloud without connecting a console. In terms of features for gamers, it's hard to find any major omissions in the R95H.

Gaming features

When it comes to gaming features, the Philips PQS9000 really has a lot to offer. Four HDMI 2.1 ports let you connect multiple devices without having to decide which one gets the full-capability port. Consoles can use 120 Hz in Full HD, 1440p and 4K, and a PC can also take advantage of 144 Hz at 4K or 240 Hz if you drop down to Full HD. There's also VRR, which matches the refresh rate to the frame rate and prevents screen tearing. Its range goes from 48–240 Hz, with the upper limit applying to Full HD mode.

ALLM is included, so the TV automatically switches into game mode, and HGiG works correctly, which is useful when setting up HDR on a console. There's also a Game Bar for quick access to settings and signal information. The list even includes Dolby Vision gaming, but that option is hard to enjoy because of very high latency. Apart from that caveat, the feature set is really solid.