Philips The One (PUS8959 / PUS8919 / PUS8909 / PUS8949 vs LG OLED B6

The luminance chart for Philips PUS8959 shows that the television can achieve around 550 nits of brightness, which can be considered a satisfactory level. This brightness allows the effects of HDR to be felt, particularly standing out in more demanding scenes. In the tested patterns, the television performed quite well, even in challenging sequences like those from "Sicario 2". Due to the lack of local dimming, the television does not dim small bright elements, and they shine with the full "power" of the television but at the cost of the silverish blacks we mentioned in the paragraph about blacks. It is also worth praising Philips PUS8959 for its good coverage of the DCI-P3 color palette, which amounts to around 94.5%. This makes the colors vivid and close to the creators' intentions, further enhancing the quality of HDR effects and the viewing experience of high dynamic range content.

The LG B6 is a moderately bright OLED. After calibration it reaches about 800 nits, roughly 200 nits more than last year’s B5. That’s thanks to the new budget OLED SE panel from LG Display. In practice it simply gives a bit more headroom and makes HDR in many scenes look fuller than on last year’s lower-tier OLEDs. That doesn’t mean the B6 has no limits. In very bright shots, when a large part of the screen is strongly lit, brightness can drop below 400 nits. This behavior is typical for OLED TVs (especially those from this segment) and that’s when you see the biggest difference versus more expensive models. All things considered, we rate the B6’s results as really solid. It’s still not a TV for breaking brightness records, but the HDR effect is strong enough that you can really feel the step up from ordinary SDR in films.

Color gamut

Using the OLED SE panel has slightly affected wide color gamut coverage. Compared with last year’s model, results fell by a few percentage points. DCI-P3 reaches about 96%, and BT.2020 around 71%. That doesn’t mean the colors on the LG B6 are weak. In most movies and series they look lively, well saturated and simply pleasing to the eye. You only notice a difference in very bright, highly colorful scenes. Then colors lose some intensity compared with QD-OLED panels. This comes from the WOLED panel construction. Besides red, green and blue subpixels it also uses a white subpixel that helps boost brightness. It comes at a cost: at very high luminance some color is effectively “diluted” by the white light, so saturation of some colors can be slightly lower. In everyday use this isn’t a big issue, but you can notice it in the most demanding scenes.

The Philips PUS8959 television was tested in the best, theoretically most precise picture mode – Filmmaker. Although the name suggests cinematic quality, it unfortunately falls far short of the ideal. The biggest issue in this mode is white balance, both in HD and 4K content. It is characterized by a significant dominance of the red color and dips in the green level, resulting in an unnatural color reproduction. For example, white elements of the image have a distinctly pinkish hue, and the green is less intense, causing the overall image to lose its naturalness and color balance. The ColorChecker test confirms these errors – it is clearly visible how the color samples "deviate" from the correct values, which can be best observed on the sample squares that should accurately reproduce colors. The lack of accuracy in this regard affects the realism and fidelity of the image, which is particularly undesirable in Filmmaker mode.

Regarding brightness characteristics, the gamma chart resembles a real roller coaster – with small elements displayed on the screen, the brightness is excessive, causing details to become overly highlighted. Meanwhile, at higher gamma values, the image loses contrast and becomes too dark, making the overall appearance look less dynamic. Similar issues can be noticed in the EOTF characteristics – the television is unable to correctly reproduce the brightness level, negatively affecting the overall image quality.

We tested the LG B6 in Filmmaker Mode, which is the best picture setting available right out of the box. ISF modes deliver very similar results, but in our tests we always stick to Filmmaker Mode for better comparison with other TVs. Each of those modes is, after all, a much better starting point than Vivid or Eco mode, where the picture is heavily boosted and noticeably less natural. With SDR content, the factory settings perform really well. Color errors are small, gamma behaves properly, and the image looks natural during ordinary viewing and does not seem overly "pumped up." It's a bit worse with HDR. When you play that kind of content you can quickly see that the white balance hasn't been set perfectly. Too much blue and red causes the image to shift toward a slightly pink tint. This is also confirmed by measurements of the color gamut and the ColorChecker, where samples clearly drift in that direction. It's not a flaw that completely ruins the picture, but you can notice it in HDR films. So people who care about the most faithful image should consider the calibration we describe later in the review.

After calibration, the Philips PUS8959 television shows a significant improvement in color reproduction, especially in HD content. The white balance is exceptionally even, and the Delta E error values are below 1, which can be considered an outstanding result. Additionally, the gamma, which is responsible for brightness in lower-quality materials, performs very well, maintaining a stable level at 2.4, leading to an appropriate balance between bright and dark areas of the image.

Regarding 4K HDR materials, a significant improvement is also noticeable. The white balance, although not as perfect as in HD content, no longer shows issues with excessive red exposure, making the image appear more natural and harmonious. Unfortunately, in the EOTF characteristics, it is difficult to speak of any significant improvement, due to the design limitations of the television that prevent significant enhancement in this aspect.

Nevertheless, the overall performance is much better after calibration, making the Philips PUS8959 one of those televisions where it is truly worth spending time on precise calibration to achieve satisfactory image quality.

During calibration we focused primarily on HDR content, because that's where the factory settings required the biggest corrections. We didn't neglect SDR mode, though, which after adjustment was brought almost to perfection. Colors are very accurate and brightness is handled as it should be. The biggest improvement in HDR came from correcting the white balance. After removing the excess red and blue, the pinkish tint disappeared and the image became much more natural. Skin tones, whites and all colors that had been shifting toward magenta improved. After calibration most errors fell below a Delta E of 2–3, the threshold at which the average viewer stops noticing differences with the naked eye. The LG B6 can therefore deliver a very accurate image, especially for the manufacturer's entry-level OLED model.

When it comes to smoothing tonal transitions, the "Distortion Reduction" function at the minimal setting performs quite well, effectively smoothing tonal transitions without excessive influence on other elements of the image. In tests, I did not notice that the reduction negatively affected the image structure, such as film grain or object details – everything remains in place, which is a big plus for users who appreciate the natural look of film materials.

On the other hand, regarding digital processing, the image looks quite good, although it is characterized by very softened contours, giving it an almost "misty" quality. This effect can evoke mixed feelings – some users may enjoy the fluidity and delicacy of this type of presentation, while others may find it too gentle, losing detail. It is a matter of individual preferences, but it must be admitted that the Philips PUS8959 provides quite subtle yet effective tools for improving tonal transitions without excessive interference in the natural character of the image.

The LG B6 handles lower-quality sources very well. Much of the credit goes to effective digital image processing, which can mask some source imperfections without overly smoothing the whole scene. The feature "Smooth Gradation" proves particularly useful. It can significantly reduce posterization, which we mentioned earlier, especially in darker areas of the image. The safest choice remains Low or Medium. The function still effectively smooths harsh tonal transitions, but does not yet interfere too much with fine details. The most dedicated purists can, of course, leave it off. Upscaling to 4K also performs very well. Full HD and 720p content retain a good amount of detail, and the image is neither overly sharpened nor excessively blurred. Some limitations become noticeable only with very poor sources below 720p, where the smallest subtitles and fine elements are not always perfectly sharp, but this is true for almost every other TV on the market.

Philips TV PUS8959 is equipped with a 120 Hz panel, which should satisfy more demanding users, especially those who love watching dynamic sports broadcasts or playing games. Such a high refresh rate allows for a significantly smoother image, being a key aspect during dynamic scenes and fast actions.

For those who prefer watching movies, the TV offers an additional motion smoother that allows adjusting the frame rate of the film according to personal preferences. The Philips PUS8959 has a 10-step adjustment for the functions called "Smoothness" and "Motion Blur Reduction." The "Smoothness" function is responsible for increasing the number of frames through interpolation, making motion on the screen smoother, resembling the effect of so-called "soap opera." Meanwhile, "Motion Blur Reduction" focuses on minimizing blurring and improving motion sharpness, which is particularly noticeable in dynamic sequences, such as action scenes or fast sports shots.

One of the biggest advantages of OLED panels is their very fast pixel response time. This keeps the image sharp and prevents the visible smearing that often appears on LCD TVs. However, there is a downside. During slow camera pans, motion can look more choppy than on LCD screens, where the slower panel naturally masks some of that effect. Fortunately, on the LG B6 you can easily soften this with TruMotion. With the motion smoothing properly adjusted, you can achieve smoother motion without giving the picture an excessive soap-opera effect.

Philips PUS8959 is a television that will certainly satisfy gaming enthusiasts. It supports most modern technologies useful during gameplay, such as HGiG, allowing for better HDR effect reproduction in games. As a result, the image is closer to what the game developers intended to achieve.

The television also supports 120 Hz image display, ensuring smoothness and dynamism, which is particularly important during action games and sports broadcasts. The Game Bar feature provides quick access to game settings, making it easier to adjust the image according to user preferences without interrupting gameplay.

Unfortunately, the Dolby Vision mode does not offer low input lag, which may be noticeable during dynamic scenes. Nevertheless, thanks to the HGiG feature and high refresh rate, the Philips PUS8959 remains an attractive choice for gamers, offering good image quality and appropriate smoothness during gameplay.

LG OLED B6 offers a powerful set of advantages for gamers; it's simply a complete platform for PS5, Xbox Series X/S, or a solid PC. It has four full-size HDMI 2.1 ports with 48 Gbps bandwidth, so you can skip the annoying cable swapping when you want to connect several newer devices at once. We get the full suite of sync technologies – from classic VRR to G-Sync and FreeSync. The screen seamlessly matches the refresh rate to the frame output produced by the console or graphics card. Of course ALLM is included: the B6 automatically detects a running game and immediately cuts input lag to a minimum. HDR handling is also excellent. The TV supports Dolby Vision, and a properly implemented HGiG standard means that after an initial calibration in the console settings the picture won’t suffer from blown-out highlights or lost detail in bright areas. The cherry on top is the Game Bar. Instead of digging through the full menu during gameplay, one click lets you adjust shadow visibility, tweak selected settings, or simply check the display’s current operating mode. All of this makes the LG B6 a great choice for gamers.