PHILIPS PUS9010 (IPS) vs Sony BRAVIA 2 II (S25M2)

In the Philips PUS9010 version with an IPS panel, HDR brightness unfortunately falls short compared to the previously tested 55-inch variant with a VA panel. The difference is about 100 nits, which is clearly noticeable given the relatively low values. While the VA version could exceed 500 nits, here the maximum brightness reaches around 400 nits. This level still allows for watching movies and series in HDR, especially on streaming platforms, but the effects are clearly more subdued. Bright elements do not have as much impact, and scenes requiring high luminance appear less impressive. On the positive side, the coverage of the DCI-P3 color palette is commendable. The IPS version offers about 91%, which is roughly 5% more than the variant with the VA panel. This translates to slightly better color saturation in HDR content, despite the lower brightness. Colors can appear more vivid and consistent, particularly in colorful scenes.

Sony Bravia 2 II is not a very bright TV and unfortunately that is immediately apparent in HDR. In our measurements brightness stayed around 300 to 330 nits, which is definitely too low for the brightest parts of the picture to look truly impressive. In practice HDR here does not differ that much from ordinary SDR. Bright highlights, the sun, or lamps are of course visible, but they lack the intensity you would expect from HDR material. The Bravia 2 II therefore performs much better with regular SDR content, and it is in that use case that its limited brightness will be least noticeable.

Color gamut coverage

Sony Bravia 2 II also doesn't impress when it comes to colors. The TV doesn't use any additional gamut-expanding filter, such as the quantum dots found in QLED TVs or a PFS phosphor layer. In our measurements DCI-P3 coverage was about 78%, and the very wide BT.2020 around 57%. That's definitely too little to talk about truly saturated colors in HDR content. More intense reds, greens, or turquoise hues will simply be less striking than on TVs with an expanded color gamut. The Bravia 2 II therefore fares much better with standard Rec.709, the gamut used for movies, series, and TV in SDR.

We assessed color reproduction, as always, using factory settings, focusing on movie mode, which in the case of Philips usually offers the best starting point. This is also a good moment to show how much the same TV model can vary depending on the panel used. Looking at white balance, the overall trend remains similar to the variant with a VA panel. There is still excessive red in the whites, but in the tested unit with an IPS panel, there are also deficiencies in the blue channel. As a result, the image has a slightly different color character, which can be clearly seen in the comparative materials. This is a very good example showing why ready-made settings downloaded from the internet may not always work even within the same model.

However, returning to the assessment itself, this unit performs quite well, especially in SDR content. Color tests show correct saturation and color consistency, without glaring errors that could interfere with everyday viewing. In HDR materials, slight deficiencies in reds are already noticeable, but these are not flaws that completely ruin the perception of the image. The biggest limitations do not stem directly from the colors but rather from whites and blacks. The use of an IPS panel and slightly lowered gamma results in the image being slightly boosted in brightness, while the weak black further affects perceived contrast. This makes the overall look brighter, but at the same time, it loses depth, especially during evening viewing.

Out-of-the-box color reproduction in Cinema mode was really good, at least for ordinary SDR material. The Bravia 2 II had a slight tendency to boost reds, so some colors skewed a bit warmer, at times with a faint pinkish tint. However, it wasn't a major fault, and during normal viewing the picture still looked quite natural. There was a bit more going on with image brightness. Looking at the gamma trace, you can see Sony doesn't stick exactly to the reference value. The darkest parts are slightly lifted, while as brightness increases the gamma gradually rises and a larger portion of the image becomes darker than it should. That said, the difference isn't large enough to seriously interfere with everyday viewing. Overall, SDR straight out of the box performs pretty well.

The situation is much worse in HDR. We already mentioned the limited color gamut, but the Bravia 2 II also manipulates image brightness quite aggressively here. The EOTF curve sits below the reference for a large part of the range, which means the TV renders most midtones and brighter parts of the scene darker than the source material intends. Only toward the very end of the range does the curve flatten out, as the panel reaches the limits of its capabilities. Combined with a peak brightness of around 300 nits, this results in HDR that not only lacks punch but can simply look too dim.

After calibration, the image was brought to a really reasonable level. Everything looks coherent and natural, and when it comes to color reproduction, it's hard to definitively state whether we have a VA or IPS panel. This is a good sign, showing that the TV has a solid foundation for further adjustments. It's worth noting the larger color gamut coverage in this variant, which can slightly improve the reception of colorful scenes, especially in HDR content. However, this advantage is largely counterbalanced by the elevated blacks, resulting from the use of an IPS panel. Limited black depth affects perceived contrast, especially when watching in a dark room. As a result, despite the noticeable improvement after calibration, the final assessment remains the same as in the variant with a VA panel. Better colors are not able to fully compensate for the weaker blacks.

Calibration did a lot for the Bravia 2 II, especially with SDR content. Above all, we were able to even out the white balance and tidy up the gamma, which now sticks much closer to reference values. As a result, the picture no longer has the previous pink tint, and the brightness of individual areas is much better balanced. You can also see this in the color errors, which dropped to a very low level after calibration (with minor issues in the most saturated reds).

We also partially tamed the Bravia 2 II in HDR, particularly in how the TV manages image brightness. However, there is one thing no calibration can fix: the panel's inherent limitations. The narrow color gamut means the TV physically cannot reproduce the most saturated colors present in HDR content. On top of that, the IPS panel's low contrast leaves darker scenes veiled by a grayish glow, causing colors to lose some of their depth. So we can improve how the Bravia 2 II uses its capabilities, but unfortunately we can't overcome the panel's fundamental limits.

In the Philips PUS9010, we find another iteration of the P5 Perfect Picture image processor, which aims to improve the quality of weaker materials. One of the components of this system is the distortion reduction function, responsible for smoothing tonal transitions. It works effectively and actually reduces visible color gradation. Unfortunately, it does so rather aggressively. In practice, it can dull details such as material textures or film grain. This is a clear compromise, so we wouldn't recommend it for movie screenings. It performs much better with looser content, like YouTube or regular television. The P5 processor also handles lower resolution materials quite well. The image is soft, sometimes even too soft, but it can easily be adjusted with the sharpness slider, tailoring the effect to personal preferences. Additionally, the lack of edge cropping in SD materials is a plus, which is still not standard in this class of televisions.

Upscaling in the Bravia 2 II performs quite well, and in that respect the TV maintains the standard Sony has accustomed us to. Lower-resolution content is sensibly scaled to 4K, with the image slightly smoothed and without over-sharpening edges. It’s a different story when it comes to improving content with visible compression. That’s handled by the "Digital Noise Reduction" feature, which on the "High" setting can indeed smooth out some ugly tonal banding. The problem is it does so fairly aggressively, removing a lot of fine detail along with the imperfections, including natural film grain. Moreover, when there’s more motion on screen its effectiveness drops significantly and the improvement becomes minimal. So we generally avoided using this feature in everyday viewing.

Philips PUS9010 has a 4K panel with a refresh rate of 144 Hz, which will be appreciated primarily by sports fans and gamers. This is especially evident in dynamic scenes where motion is sharp, and annoying trailing is nearly absent. When it comes to movies (standard 24 fps), Philips provides us with a proven set of settings known from higher series. Two sliders are used to control motion. The “Smoothness” slider allows you to adjust the image to your taste: at low settings, we maintain a cinematic character, while moving the slider to the right gives us a perfectly smooth, albeit slightly “theatrical” effect. On the other hand, the “Motion Blur Reduction” is a feature made for sports – it ensures that fast objects do not lose details and remain clear.

The Bravia 2 II uses a 60 Hz panel and, given its capabilities, handles motion quite well. However, keep in mind this is a basic panel, and its limitations are already noticeable, especially with sports. The TV cannot interpolate 50/60 fps content to a higher refresh rate, so it can't further improve the sharpness of fast-moving objects. For movies and series, you get a standard motion smoother that can reduce the characteristic judder of material shot at 24 fps.

The Philips PUS9010 is truly a solid machine for gaming. It has everything that matters: VRR, automatic game mode (ALLM), and support for HGiG. The latter is a great feature—it allows HDR in games to be set exactly as the creators envisioned. The television handles 120 Hz refresh rates effortlessly at every popular resolution (1080p, 1440p, and 4K). It doesn't matter if you connect a PS5, Xbox, or a powerful PC—everything runs smoothly and just as it should. Gamers will also appreciate the Game Bar. It's a quick, clear menu that immediately shows whether low latency mode is active. This is especially useful when frequently switching between different consoles. The experience is completed by Ambilight. Evening sessions with this lighting are on a whole different level; the image seems larger, and dynamic scenes leave an even better impression. Even if someone isn’t a fan of such “gimmicks,” it’s hard to deny that it’s impressive.

The Bravia 2 II is not a TV particularly well suited for gaming, and the feature list makes that clear pretty quickly. You basically only get automatic low-latency mode (ALLM) and a simple Game Bar where you can view basic signal information and change a few settings. But that's where the list of advantages ends. The TV doesn't support VRR or 120 Hz (not even at lower resolutions), and on top of that it has problems with a proper implementation of the HDR HGIG format. It can, of course, be used for occasional console gaming, and thanks to low input lag controls stay responsive, but if you're mainly looking for a TV for gaming, the Bravia 2 II will simply be a very limited choice.