PHILIPS PUS9010 (IPS) vs Samsung QN80H

In the Philips PUS9010 version with an IPS panel, HDR brightness unfortunately falls short compared to the previously tested 55-inch variant with a VA panel. The difference is about 100 nits, which is clearly noticeable given the relatively low values. While the VA version could exceed 500 nits, here the maximum brightness reaches around 400 nits. This level still allows for watching movies and series in HDR, especially on streaming platforms, but the effects are clearly more subdued. Bright elements do not have as much impact, and scenes requiring high luminance appear less impressive. On the positive side, the coverage of the DCI-P3 color palette is commendable. The IPS version offers about 91%, which is roughly 5% more than the variant with the VA panel. This translates to slightly better color saturation in HDR content, despite the lower brightness. Colors can appear more vivid and consistent, particularly in colorful scenes.

Samsung QN80H is without a doubt a bright TV. In synthetic tests it breaks the 1000-nit barrier, which on paper already promises a solid HDR effect. In practice the screen really shows its claws, though it can't fully spread its wings (or its backlight 🤔) in every situation. The best impression comes from bright, expansive shots. Sunlit exteriors or heavily lit scenes look really good on it. Brightness then stays around 700 nits, which gives a noticeable step up in quality over standard SDR. Problems start in dark scenes with small, pinpoint highlights. The QN80H tends to heavily dim them, doing everything it can to protect black levels. On one hand we gain better contrast, on the other... we lose some of the dynamics and the sparkle of fine HDR details. The TV therefore has considerable potential, but the dimming algorithm can be too restrictive.

Color gamut coverage

Colors are good too. The QN80H uses quantum dot technology, and in our measurements it covered 93% of the DCI-P3 space and about 70% of BT.2020. Today those results won't exactly blow anyone away, but in real-world use they're more than enough to deliver vivid, natural-looking images in most movies and TV series. Colors are properly saturated and, after proper tuning, don't look artificial or overly aggressive.

We assessed color reproduction, as always, using factory settings, focusing on movie mode, which in the case of Philips usually offers the best starting point. This is also a good moment to show how much the same TV model can vary depending on the panel used. Looking at white balance, the overall trend remains similar to the variant with a VA panel. There is still excessive red in the whites, but in the tested unit with an IPS panel, there are also deficiencies in the blue channel. As a result, the image has a slightly different color character, which can be clearly seen in the comparative materials. This is a very good example showing why ready-made settings downloaded from the internet may not always work even within the same model.

However, returning to the assessment itself, this unit performs quite well, especially in SDR content. Color tests show correct saturation and color consistency, without glaring errors that could interfere with everyday viewing. In HDR materials, slight deficiencies in reds are already noticeable, but these are not flaws that completely ruin the perception of the image. The biggest limitations do not stem directly from the colors but rather from whites and blacks. The use of an IPS panel and slightly lowered gamma results in the image being slightly boosted in brightness, while the weak black further affects perceived contrast. This makes the overall look brighter, but at the same time, it loses depth, especially during evening viewing.

The QN80H's factory settings were really good, especially compared with most TVs that come into our tests. Of course, we performed measurements in Filmmaker Mode, and that's the mode we recommend turning on right after the initial setup. In SDR material our unit was set up surprisingly well. The white balance was very even, colors looked natural, and the errors were so small they were hard to spot without measurement equipment. The only weak point was the gamma. In brighter parts of the image the TV brightened them a bit too much, so the picture sometimes lost a little depth. Even so, we'd like most TVs to look this good straight out of the box.

It was a bit worse in HDR. The white balance itself was still set correctly, so the problem wasn't with the colors but with how the QN80H managed image brightness. You could see that immediately on the EOTF chart. The TV brightened large parts of scenes too much, causing the brightest elements to blow out. Interestingly, at the same time very small points were often dimmed too much. As a result some fine detail simply disappeared. So the factory Filmmaker Mode in HDR isn't bad, but it's definitely not as well calibrated as in SDR.

After calibration, the image was brought to a really reasonable level. Everything looks coherent and natural, and when it comes to color reproduction, it's hard to definitively state whether we have a VA or IPS panel. This is a good sign, showing that the TV has a solid foundation for further adjustments. It's worth noting the larger color gamut coverage in this variant, which can slightly improve the reception of colorful scenes, especially in HDR content. However, this advantage is largely counterbalanced by the elevated blacks, resulting from the use of an IPS panel. Limited black depth affects perceived contrast, especially when watching in a dark room. As a result, despite the noticeable improvement after calibration, the final assessment remains the same as in the variant with a VA panel. Better colors are not able to fully compensate for the weaker blacks.

The biggest difference after calibration was in HDR Filmmaker mode. SDR was already very good out of the box, so we didn't have much work to do there. In HDR, however, we managed to tame the way the QN80H handled brightness, as it had been over-brightening most scenes. After calibration the picture is calmer, more natural, and much closer to how a faithful picture should look.

In the Philips PUS9010, we find another iteration of the P5 Perfect Picture image processor, which aims to improve the quality of weaker materials. One of the components of this system is the distortion reduction function, responsible for smoothing tonal transitions. It works effectively and actually reduces visible color gradation. Unfortunately, it does so rather aggressively. In practice, it can dull details such as material textures or film grain. This is a clear compromise, so we wouldn't recommend it for movie screenings. It performs much better with looser content, like YouTube or regular television. The P5 processor also handles lower resolution materials quite well. The image is soft, sometimes even too soft, but it can easily be adjusted with the sharpness slider, tailoring the effect to personal preferences. Additionally, the lack of edge cropping in SD materials is a plus, which is still not standard in this class of televisions.

Digital image processing in the Samsung QN80H is handled by the second-generation NQ4 AI processor. It's a chip we already know from earlier models and it still performs very well, especially with lower-resolution material. The image is effectively upscaled to 4K, but without excessive sharpening and without the feeling that the TV is forcing improvements on the source material.

The "Noise Reduction" feature also proves useful. It can noticeably reduce posterization and visible banding in poorer-quality material, particularly in low-bitrate streaming. However, it's important to remember that it doesn't work without side effects. It can remove some film grain and slightly smooth the image. So with a good-quality source we'd leave this feature off. If, however, banding and uneven tonal transitions bother you more than losing some grain, "Noise Reduction" can be a really useful addition.

Philips PUS9010 has a 4K panel with a refresh rate of 144 Hz, which will be appreciated primarily by sports fans and gamers. This is especially evident in dynamic scenes where motion is sharp, and annoying trailing is nearly absent. When it comes to movies (standard 24 fps), Philips provides us with a proven set of settings known from higher series. Two sliders are used to control motion. The “Smoothness” slider allows you to adjust the image to your taste: at low settings, we maintain a cinematic character, while moving the slider to the right gives us a perfectly smooth, albeit slightly “theatrical” effect. On the other hand, the “Motion Blur Reduction” is a feature made for sports – it ensures that fast objects do not lose details and remain clear.

Motion blur and motion handling on the QN80H are really good, mainly thanks to the fast panel. In 4K the screen refreshes at up to 144 Hz, and when switched to Full HD and connected to a PC it can reach as high as 240 Hz. That's new for Samsung TVs and a nice bonus for people who want to use the TV for PC gaming as well. We were more interested, however, in how the QN80H performs at 120 Hz, since consoles use that refresh rate. Here it's really good. The panel doesn't have a big problem with the smearing typical of VA panels, and slight trails behind moving objects are mostly visible on dark backgrounds. This is nothing that would interfere with normal sports viewing or gaming. The TV also includes a motion smoothing system that Samsung calls "Image Clarity." You can adjust judder reduction and blur reduction separately, so it's easy to tailor its operation to movies, sports, or your own preferences.

The Philips PUS9010 is truly a solid machine for gaming. It has everything that matters: VRR, automatic game mode (ALLM), and support for HGiG. The latter is a great feature—it allows HDR in games to be set exactly as the creators envisioned. The television handles 120 Hz refresh rates effortlessly at every popular resolution (1080p, 1440p, and 4K). It doesn't matter if you connect a PS5, Xbox, or a powerful PC—everything runs smoothly and just as it should. Gamers will also appreciate the Game Bar. It's a quick, clear menu that immediately shows whether low latency mode is active. This is especially useful when frequently switching between different consoles. The experience is completed by Ambilight. Evening sessions with this lighting are on a whole different level; the image seems larger, and dynamic scenes leave an even better impression. Even if someone isn’t a fan of such “gimmicks,” it’s hard to deny that it’s impressive.

Samsung QN80H is a TV that scores very well on gamer-oriented features. The biggest new addition for 2026 is DLG mode, which allows refresh rates up to 240 Hz when the image is switched to Full HD resolution. This option is aimed mainly at PC users, but it also shows that Samsung is still heavily developing the gaming side of its TVs. That’s not the end of the list of advantages. The QN80H has four full-featured HDMI 2.1 ports, which in this price range still isn’t standard. You can therefore connect multiple consoles, a PC, or a soundbar at the same time without worrying which input supports the full picture capabilities. The TV also supports VRR, ALLM, and HGiG, so it’s hard to fault its basic feature set. One downside remains the lack of Dolby Vision, which may matter especially to Xbox Series X owners. That said, it’s not a flaw that rules out the QN80H as a gaming TV. Samsung includes a feature still missing from most manufacturers: its proprietary motion interpolator, Game Motion Plus. It’s a motion interpolator that also works in game mode, allowing you to improve the smoothness of titles running at 30 or 60 frames per second without a drastic increase in input lag. In practice, Game Motion Plus can make a much bigger difference than Dolby’s processing, especially in more demanding games that don’t offer a 60 FPS mode. The image becomes noticeably smoother while controls remain responsive enough. So despite the lack of Dolby Vision, the QN80H is still one of the best-equipped TVs for gamers in its class.