PHILIPS PUS9010 (IPS) vs LG OLED G6 (G64LW, G66LS)

In the Philips PUS9010 version with an IPS panel, HDR brightness unfortunately falls short compared to the previously tested 55-inch variant with a VA panel. The difference is about 100 nits, which is clearly noticeable given the relatively low values. While the VA version could exceed 500 nits, here the maximum brightness reaches around 400 nits. This level still allows for watching movies and series in HDR, especially on streaming platforms, but the effects are clearly more subdued. Bright elements do not have as much impact, and scenes requiring high luminance appear less impressive. On the positive side, the coverage of the DCI-P3 color palette is commendable. The IPS version offers about 91%, which is roughly 5% more than the variant with the VA panel. This translates to slightly better color saturation in HDR content, despite the lower brightness. Colors can appear more vivid and consistent, particularly in colorful scenes.

The LG G6 is currently one of the brightest OLEDs on the market. Its peak brightness reaches nearly 2500 nits, and best of all – this has a direct impact on real film scenes. The television flawlessly pulls out details in the bright parts of the image. And this is regardless of whether we are talking about very small points like stars in the sky or slightly larger elements on the screen. Naturally, with full-screen, uniformly white scenes, the brightness of the G6 decreases due to the panel's protection system (ABL). However, in real, varied film shots, this value still hovers around 2000 nits, which can be considered an outstanding result. The coverage of the color palette also deserves praise. The new 2nd generation Tandem OLED panel brought only a cosmetic change, but still an improvement. The DCI-P3 color gamut coverage reaches nearly 99.5%, while the ultra-wide BT.2020 is around 84%. These are very good results, although one must remember one thing: at extremely high brightness levels, the volume of colors will be lower than in QD-OLED panels from Samsung Display due to the use of a white sub-pixel (WOLED). However, in everyday content and most films, detecting this difference will be very difficult.

We assessed color reproduction, as always, using factory settings, focusing on movie mode, which in the case of Philips usually offers the best starting point. This is also a good moment to show how much the same TV model can vary depending on the panel used. Looking at white balance, the overall trend remains similar to the variant with a VA panel. There is still excessive red in the whites, but in the tested unit with an IPS panel, there are also deficiencies in the blue channel. As a result, the image has a slightly different color character, which can be clearly seen in the comparative materials. This is a very good example showing why ready-made settings downloaded from the internet may not always work even within the same model.

However, returning to the assessment itself, this unit performs quite well, especially in SDR content. Color tests show correct saturation and color consistency, without glaring errors that could interfere with everyday viewing. In HDR materials, slight deficiencies in reds are already noticeable, but these are not flaws that completely ruin the perception of the image. The biggest limitations do not stem directly from the colors but rather from whites and blacks. The use of an IPS panel and slightly lowered gamma results in the image being slightly boosted in brightness, while the weak black further affects perceived contrast. This makes the overall look brighter, but at the same time, it loses depth, especially during evening viewing.

We tested the LG G6 in the best factory mode for color fidelity, which is FILMMAKER MODE. For our test unit, this mode was fairly well-tuned right out of the box. In SDR content, the only thing we could nitpick was the white balance, which leaned towards warmer tones. As a result, the image could sometimes appear slightly yellowed; however, overall, it wasn't a bothersome issue. The G6 performed a bit worse with HDR content. There, we noticed too much blue component in the white balance. This caused the image to take on cooler shades, resulting in quite noticeable errors. As can be seen in our ColorChecker chart, colors were indeed shifting towards these cooler registers. Nevertheless, for factory settings, the television displayed a completely decent level. However, we know that OLED screens – especially those from LG – respond wonderfully to professional calibration, which is why we immediately proceeded with it.

After calibration, the image was brought to a really reasonable level. Everything looks coherent and natural, and when it comes to color reproduction, it's hard to definitively state whether we have a VA or IPS panel. This is a good sign, showing that the TV has a solid foundation for further adjustments. It's worth noting the larger color gamut coverage in this variant, which can slightly improve the reception of colorful scenes, especially in HDR content. However, this advantage is largely counterbalanced by the elevated blacks, resulting from the use of an IPS panel. Limited black depth affects perceived contrast, especially when watching in a dark room. As a result, despite the noticeable improvement after calibration, the final assessment remains the same as in the variant with a VA panel. Better colors are not able to fully compensate for the weaker blacks.

After conducting a professional calibration, we gained complete control over the panel, and we were able to adjust all parameters to nearly zero. We managed to perfectly tune the white balance, which made the factory-cool and warm tints disappear from the screen. The effects are clearly evident in the ColorChecker test – the average color reproduction errors dropped below the critical value of 1-2. And what does that mean? PERFECT colors, with no distortion whatsoever! However, from a reviewer's obligation, we must comment on how the LG G6 autonomously manipulates brightness, for which the EOTF curve is responsible. When we look at the standard synthetic graph, it may seem that the line is quite straight. The situation changes, however, when we turn on the measurement filter, which shows how the television interprets brightness in real, moving film scenes (EOTF in MOVIES). At that point, it becomes clear that some of the smallest fragments on the screen are slightly over-brightened by the algorithm. Of course, for the average viewer, such a deviation will be practically unnoticeable, but in the test of such an expensive screen, it is worth noting – especially since we are talking about a model that has huge aspirations to be the best television of the year.

In the Philips PUS9010, we find another iteration of the P5 Perfect Picture image processor, which aims to improve the quality of weaker materials. One of the components of this system is the distortion reduction function, responsible for smoothing tonal transitions. It works effectively and actually reduces visible color gradation. Unfortunately, it does so rather aggressively. In practice, it can dull details such as material textures or film grain. This is a clear compromise, so we wouldn't recommend it for movie screenings. It performs much better with looser content, like YouTube or regular television. The P5 processor also handles lower resolution materials quite well. The image is soft, sometimes even too soft, but it can easily be adjusted with the sharpness slider, tailoring the effect to personal preferences. Additionally, the lack of edge cropping in SD materials is a plus, which is still not standard in this class of televisions.

No matter what one may say about the G6's problems with near-black signal, it must be fairly acknowledged that it handles highly compressed material and lower resolution content brilliantly. All unwanted, ugly tonal transitions are effectively reduced here by the “Smooth Gradation” feature. On the “Low” setting, the algorithm operates flawlessly – effectively masking the artifacts resulting from strong compression, without destroying the sharpness and details in the frame. Higher levels of this feature indeed smooth the image even more, but they start to blur the real texture elements of objects, which is why we recommend keeping this slider at a low level. As for the upscaling to 4K, the processor does an excellent job – edge sharpness and detail reconstruction are at the highest level, and in this respect, the G6 does not lag behind the world's best.

Philips PUS9010 has a 4K panel with a refresh rate of 144 Hz, which will be appreciated primarily by sports fans and gamers. This is especially evident in dynamic scenes where motion is sharp, and annoying trailing is nearly absent. When it comes to movies (standard 24 fps), Philips provides us with a proven set of settings known from higher series. Two sliders are used to control motion. The “Smoothness” slider allows you to adjust the image to your taste: at low settings, we maintain a cinematic character, while moving the slider to the right gives us a perfectly smooth, albeit slightly “theatrical” effect. On the other hand, the “Motion Blur Reduction” is a feature made for sports – it ensures that fast objects do not lose details and remain clear.

The LG G6 is an OLED television, so in the category of motion fluidity, it traditionally deserves the highest ratings. The television supports a very high refresh rate of up to 165 Hz in 4K resolution, but most importantly – you will not see any signs of blurring on the screen. The response time of the panel is incredibly fast, ensuring that dynamic images remain perfectly sharp.

The Philips PUS9010 is truly a solid machine for gaming. It has everything that matters: VRR, automatic game mode (ALLM), and support for HGiG. The latter is a great feature—it allows HDR in games to be set exactly as the creators envisioned. The television handles 120 Hz refresh rates effortlessly at every popular resolution (1080p, 1440p, and 4K). It doesn't matter if you connect a PS5, Xbox, or a powerful PC—everything runs smoothly and just as it should. Gamers will also appreciate the Game Bar. It's a quick, clear menu that immediately shows whether low latency mode is active. This is especially useful when frequently switching between different consoles. The experience is completed by Ambilight. Evening sessions with this lighting are on a whole different level; the image seems larger, and dynamic scenes leave an even better impression. Even if someone isn’t a fan of such “gimmicks,” it’s hard to deny that it’s impressive.

LG G6 is a true monster for gamers and one of the best-equipped TVs in this regard on the market. The manufacturer did not seek compromises and equipped this model with as many as four full HDMI 2.1 ports with a maximum bandwidth of 48 Gbps. This means that no matter which port you plug your PlayStation 5, Xbox Series X, or powerful PC into, you will extract the absolute maximum from them.

The TV supports a full suite of gaming technologies: from VRR (Variable Refresh Rate), through AMD FreeSync Premium Pro, to Nvidia G-Sync Compatible. Let's add to this the remarkably low, almost imperceptible input lag and a brilliantly functioning gamer panel (Game Optimizer), which allows you to continuously monitor the signal parameters. Gaming on this screen, with the perfect black of OLED and powerful refresh rates, is pure pleasure.