Philips PUS8209 vs LG OLED B6

Unfortunately, this is where the problems begin. A maximum brightness of 280 nits is definitely too low to feel the true HDR effect. In practice, the image resembles standard SDR more, so it's hard to speak of deeper visual experiences. On the plus side, the color gamut coverage is commendable – 91.4% DCI-P3 is a result that will be sufficient for most films. It must also be noted that the image is stable and there are no issues with sudden changes in brightness or colors. Looking at the overall picture, HDR on this TV is more of a formality than an actual added value. If we are looking for true HDR emotions, this model may not meet expectations.

The LG B6 is a moderately bright OLED. After calibration it reaches about 800 nits, roughly 200 nits more than last year’s B5. That’s thanks to the new budget OLED SE panel from LG Display. In practice it simply gives a bit more headroom and makes HDR in many scenes look fuller than on last year’s lower-tier OLEDs. That doesn’t mean the B6 has no limits. In very bright shots, when a large part of the screen is strongly lit, brightness can drop below 400 nits. This behavior is typical for OLED TVs (especially those from this segment) and that’s when you see the biggest difference versus more expensive models. All things considered, we rate the B6’s results as really solid. It’s still not a TV for breaking brightness records, but the HDR effect is strong enough that you can really feel the step up from ordinary SDR in films.

Color gamut

Using the OLED SE panel has slightly affected wide color gamut coverage. Compared with last year’s model, results fell by a few percentage points. DCI-P3 reaches about 96%, and BT.2020 around 71%. That doesn’t mean the colors on the LG B6 are weak. In most movies and series they look lively, well saturated and simply pleasing to the eye. You only notice a difference in very bright, highly colorful scenes. Then colors lose some intensity compared with QD-OLED panels. This comes from the WOLED panel construction. Besides red, green and blue subpixels it also uses a white subpixel that helps boost brightness. It comes at a cost: at very high luminance some color is effectively “diluted” by the white light, so saturation of some colors can be slightly lower. In everyday use this isn’t a big issue, but you can notice it in the most demanding scenes.

Philips PUS8209 offers many picture modes, but the best among them, without a doubt, is the Filmmaker mode. Despite its proud name, it has its clear issues. In the case of HD content, the white balance is characterized by a strong dominance of red, causing the image to be significantly warmer than it should be in reality. The brightness characteristic (gamma), although correct in the midtones, has serious problems at the beginning and end of the graph. Drops in the shadows lead to a loss of details in dark areas, and highlights in bright areas make some elements look unnatural.

For high-quality 4K HDR content, the situation reverses. In this case, blue dominates, leading to an effect of artificial image enhancement, reminiscent of unnatural store settings. Such an image looks unappealing and inconsistent with the creators' intentions. An additional problem is the EOTF curve, responsible for brightness in HDR materials. It deviates significantly from the reference chart, making the image appear too dark, robbing the depth and detail of HDR content.

Against this background, the errors in the Color Checker test and deviations in color palette reproduction are exceptionally large, which negatively impacts the overall image quality. The Filmmaker mode, although the best among the available options, requires significant corrections to fully deliver the director's vision.

We tested the LG B6 in Filmmaker Mode, which is the best picture setting available right out of the box. ISF modes deliver very similar results, but in our tests we always stick to Filmmaker Mode for better comparison with other TVs. Each of those modes is, after all, a much better starting point than Vivid or Eco mode, where the picture is heavily boosted and noticeably less natural. With SDR content, the factory settings perform really well. Color errors are small, gamma behaves properly, and the image looks natural during ordinary viewing and does not seem overly "pumped up." It's a bit worse with HDR. When you play that kind of content you can quickly see that the white balance hasn't been set perfectly. Too much blue and red causes the image to shift toward a slightly pink tint. This is also confirmed by measurements of the color gamut and the ColorChecker, where samples clearly drift in that direction. It's not a flaw that completely ruins the picture, but you can notice it in HDR films. So people who care about the most faithful image should consider the calibration we describe later in the review.

After calibration, the white balance for HD and 4K content has improved significantly. Although we did not achieve a perfectly flat characteristic, the effect is definitely better than before. The image on the television no longer appears artificially warm or overly cold, which significantly enhances the naturalness of the displayed content. The brightness characteristic (gamma) has also been adjusted - the biggest issues at the beginning and end of the graph have been mitigated. The EOTF curve, which is responsible for brightness in 4K HDR material, has been stabilized, eliminating problems with excessive dimming of the image. In the color palette test, some imperfections can still be seen due to average coverage of a wide color gamut, which is a limitation of the hardware itself. Nevertheless, the final effect is clearly better than before calibration - the image looks more natural and approaches the expectations for the Filmmaker mode.

During calibration we focused primarily on HDR content, because that's where the factory settings required the biggest corrections. We didn't neglect SDR mode, though, which after adjustment was brought almost to perfection. Colors are very accurate and brightness is handled as it should be. The biggest improvement in HDR came from correcting the white balance. After removing the excess red and blue, the pinkish tint disappeared and the image became much more natural. Skin tones, whites and all colors that had been shifting toward magenta improved. After calibration most errors fell below a Delta E of 2–3, the threshold at which the average viewer stops noticing differences with the naked eye. The LG B6 can therefore deliver a very accurate image, especially for the manufacturer's entry-level OLED model.

The television offers a "Distortion Reduction" feature that effectively improves the gradation of tonal transitions, especially when set to the minimum level. Unfortunately, it comes at a price – the feature also smooths out details like the texture of materials. On the plus side, the operation of this option does not negatively affect the film grain, which remains intact.

As for image scaling (upscaling), the television generates a plastic, soft image that generally looks pleasant. However, in the background, one can sometimes notice issues with aliasing on some elements, such as branches or fine details, which can lower the quality of the reception. Despite these minor imperfections, the overall experience of scaling is satisfactory.

The LG B6 handles lower-quality sources very well. Much of the credit goes to effective digital image processing, which can mask some source imperfections without overly smoothing the whole scene. The feature "Smooth Gradation" proves particularly useful. It can significantly reduce posterization, which we mentioned earlier, especially in darker areas of the image. The safest choice remains Low or Medium. The function still effectively smooths harsh tonal transitions, but does not yet interfere too much with fine details. The most dedicated purists can, of course, leave it off. Upscaling to 4K also performs very well. Full HD and 720p content retain a good amount of detail, and the image is neither overly sharpened nor excessively blurred. Some limitations become noticeable only with very poor sources below 720p, where the smallest subtitles and fine elements are not always perfectly sharp, but this is true for almost every other TV on the market.

The 60 Hz panel in the Philips PUS8209 is mainly suited for watching movies, but there is also a certain sense of dissatisfaction here. The TV does not offer any motion smoothing feature that would allow adjusting the smoothness of the picture to individual preferences, which may be disappointing for some users.

One of the biggest advantages of OLED panels is their very fast pixel response time. This keeps the image sharp and prevents the visible smearing that often appears on LCD TVs. However, there is a downside. During slow camera pans, motion can look more choppy than on LCD screens, where the slower panel naturally masks some of that effect. Fortunately, on the LG B6 you can easily soften this with TruMotion. With the motion smoothing properly adjusted, you can achieve smoother motion without giving the picture an excessive soap-opera effect.

The Philips PUS8209 offers basic functions useful for gamers, such as variable refresh rate (VRR), automatic low latency mode (ALLM), and a Game Bar that makes managing settings easier.

Unfortunately, due to the 60 Hz panel, the television will not meet the expectations of more demanding gamers who are counting on higher fluidity and precision of the image. Additionally, this model does not support any HDR mode dedicated to games, such as HGiG or Dolby Vision, which further limits its capabilities in this regard.

LG OLED B6 offers a powerful set of advantages for gamers; it's simply a complete platform for PS5, Xbox Series X/S, or a solid PC. It has four full-size HDMI 2.1 ports with 48 Gbps bandwidth, so you can skip the annoying cable swapping when you want to connect several newer devices at once. We get the full suite of sync technologies – from classic VRR to G-Sync and FreeSync. The screen seamlessly matches the refresh rate to the frame output produced by the console or graphics card. Of course ALLM is included: the B6 automatically detects a running game and immediately cuts input lag to a minimum. HDR handling is also excellent. The TV supports Dolby Vision, and a properly implemented HGiG standard means that after an initial calibration in the console settings the picture won’t suffer from blown-out highlights or lost detail in bright areas. The cherry on top is the Game Bar. Instead of digging through the full menu during gameplay, one click lets you adjust shadow visibility, tweak selected settings, or simply check the display’s current operating mode. All of this makes the LG B6 a great choice for gamers.