Philips PML9009 / 9019 / 9059 vs Hisense U7S Pro

The Philips PML9009 struggles to deliver the highest HDR performance. Scenes with effects around 550 nits don’t provide particularly impressive lighting, though the effects remain stable, an improvement over SDR materials. A notable exception is in Gemini Man, where a flashlight as the sole light source stands out. This is likely due to the absence of large dark areas and the relatively small size of the light source compared to scenes with larger, brighter elements like the sun. While the brightness results in HDR content aren’t quite strong enough to recommend this TV for productions utilising a wide colour gamut, it’s worth mentioning that the model does achieve decent coverage, reaching 93% of the DCI-P3 spectrum.

Let’s start with the fact that the U7S Pro is an impressively bright TV — in calibrated mode our measurement equipment showed a staggering 2200 nits of peak brightness!

As we know, peak brightness on test patterns is one thing, and actual film scenes are another. Unfortunately, in real video material the backlight output drops noticeably. The TV can still exceed the 1000-nit mark in the most demanding moments — which is still a great result and fits the mastering standards of most HDR films — but the real challenge lies in the aggressively tuned local dimming algorithms. Because of them, small, bright details like stars or the moon in a night sky are noticeably dimmed. The TV tries at all costs to maintain deep black, which is understandable, but unfortunately this comes at the expense of HDR’s dynamic range and brilliance.

The color reproduction is worth praising. The new U7S Pro is a QLED design that provides very wide color gamut coverage. Unlike last year’s model (U7Q Pro), this year’s variant is a true QLED, not a solution based on a PFS filter. As a result, color saturation has increased noticeably, and coverage of the most demanding BT.2020 color space has topped 81%.

During testing, the Philips PML9009 performed best in the factory "Filmmaker" mode, which we evaluated across both SDR and HDR content. A key characteristic observed in this mode is the EOTF curve’s behaviour in HDR content and gamma settings in SDR, designed to enhance image accuracy. However, the PML9009 presented noticeable issues, particularly with white balance, as a pronounced red dominance created a yellow tint across the entire image. This affected skin tones and white areas, with faces and whites appearing unnaturally warm. The colour shift was confirmed through the "ColourChecker" palette, where colours leaned towards warmer shades.

In the gamma analysis, responsible for image contrast, we noticed considerable inaccuracies early on. Our measured values spiked above the reference, causing dark scenes to lose detail and merge visually up to about 10% screen brightness. Following this, the values dropped below the target line, further degrading contrast—an area already challenging for this model.

In HDR content, the white balance remained similarly flawed, and the EOTF curve also restricted brightness levels, resulting in a dim, muted image. Colour inaccuracies were even more pronounced here, with lower luminance levels causing large deviations from accurate colours, which were clearly visible on the error graph, often exceeding acceptable limits. While aiming for cinematic quality, this mode ultimately fell short in delivering balanced colour and contrast fidelity.

We tested the U7S Pro, as we always do, in the best factory-tuned picture mode, Filmmaker Mode. The colors can be judged in two ways. The most disappointing was the profile intended for watching SDR content, i.e. traditional broadcast TV, YouTube, and other less demanding material. The image there was clearly yellowish, which turned out to be a direct consequence of a poorly set white balance. As our charts show, there's a large deficiency in the blue component, which drastically affected the overall color temperature. You can see this clearly on the ColorChecker charts and on the color gamut graphs themselves, where most samples shifted toward yellow. Fortunately, the factory HDR mode performed much better. There, color errors hovered around a Delta E of 3, which is a solid result.

Philips has long provided sophisticated calibration tools, including 2-point and 20-point grayscale adjustments as well as an advanced CMS (Colour Management System). These allow users to make significant improvements, and even those less attentive to image quality will likely notice a positive difference post-calibration. Both SDR and HDR content benefit from this process, notably eliminating the prominent yellow tint caused by an overemphasis on red in the white balance.

For SDR content, although gamma adjustments don’t entirely resolve the loss of detail in dark areas, the overall improvements bring most content to an impressive standard, with minimal, hardly perceptible errors. Colour accuracy is notably enhanced, achieving nearly reference quality with low deltaE errors.

HDR content, however, remains somewhat limited due to the display’s lower brightness capability. While the white balance has largely been corrected, a slight blue tint can occasionally appear. The EOTF curve aligns very well, providing accurate geometry, though colour errors persist due to the limited luminance. This calibration offers a substantial improvement but may still fall short for viewers who expect high brightness levels in HDR.

We know, however, that Hisense is capable of much more, as previous generations have shown, so we simply couldn't leave the U7S Pro's factory flaws in everyday content as they were. As always in such cases, we had the TV professionally calibrated. The result? The process brought a massive change. After manually correcting the white balance and filling in the missing blue component, the annoying yellow cast vanished as if it had been wiped away. Whites became naturally clean, and skin tones gained a proper, healthy hue. Importantly, the calibration not only tamed the finicky SDR mode but also squeezed the maximum potential out of the panel, reducing average color reproduction errors to levels almost imperceptible to the human eye. The only thing we still have to fault after the whole process is the nature of Mini-LED backlighting and its specific interaction with the HDR signal. Aggressively tuned local dimming algorithms quite strongly interfere with the EOTF luminance curve. As a result, the backlight doesn't always align with the creator's intent — depending on the scene, the curve can run noticeably above or below the reference, which in places disrupts the ideal dynamics of the HDR picture.

Given the impressive handling of tonal transitions by the Philips PML9009, one might expect similar success in the image scaling test. However, the results were less than stellar. When upscaling lower-quality images, like those from certain TV programmes or older films, the Philips algorithm tended to blur fine details noticeably, especially in intricate elements like fine branches or a model's hair.

On the other hand, the tonal transition performance remains noteworthy, with the TV offering several levels of smoothing. Even at the lowest setting, it effectively addresses non-smooth transitions in most materials, and crucially, it preserves the film grain effect, maintaining fidelity to the director's vision. However, it’s worth noting that some fine details may still appear slightly softened.

The digital processing of lower-quality signals is top-notch here, thanks to the MediaTek Pentonic 800 processor used in the U7S Pro. Upscaling, the TV's ability to pull lower-resolution content up to 4K, also performs well. We didn't notice any unnatural, sharp contours on screen, and our test image with the model simply looked attractive.

The Philips PML9009 has a 120 Hz native refresh rate, a baseline standard for watching sports and an ideal setting for gaming on consoles or PCs. Philips includes an effective motion-enhancement system for users who want to reduce the stutter of 24 fps content or need fluid motion for fast-paced scenes, like in football matches. The dedicated "Smoothness" slider effectively mitigates stuttering, while "Motion Blur Reduction" enhances the sharpness of dynamic content. Each setting produces a noticeable difference, so users can tailor the motion effects to their preferences. Our recommended setup achieves a moderate smoothing effect, avoiding the exaggerated “soap opera” appearance.

Regarding pixel response time, VA panels like this generally fall short compared to OLED or even IPS panels, which can lead to a slight "black halo" trailing behind fast-moving objects. Although not a frequent issue with this TV, the effect can be seen in certain scenes.

The Hisense U7S Pro uses a panel with a maximum 165 Hz refresh rate at 4K, and in game mode it can even reach 330 Hz at Full HD. However, it's worth remembering that those highest numbers don't matter much in everyday use, because most content still supports at most 120 Hz (for example when playing on a console). Even so, the TV handles motion quite well and performs well for an LCD design.

There's little to fault about the smoothness itself. In the menu you'll find a motion smoothing feature called "Motion Enhancement", which hides two sliders: blur reduction and judder reduction. They allow manual adjustment of the smoother, which works well for both movies and sports, effectively improving the raw TV signal.

The Philips PML9009, with HDMI 2.1 ports supporting full bandwidth, is thoroughly equipped with gamer-focused features. Core functions like Variable Refresh Rate (VRR) and Auto Low Latency Mode (ALLM) are included, as well as the additional perks of G-Sync and FreeSync compatibility and low-lag HDR Dolby Vision support. All these gaming features activate seamlessly, proving this model’s suitability for gaming. The TV’s HGIG mode, particularly beneficial for gaming, adjusts HDR effects to the television’s capabilities to avoid image dimming and blooming, an advantage given the still limited number of games supporting Dolby Vision.

For added convenience, the PML9009 has a GameBar menu, allowing in-game setting adjustments without needing to exit. This menu includes features like a crosshair option and black level correction, which can enhance the visibility of shadowed areas—ideal for competitive play.

Overall, the Philips PML9009 offers a comprehensive setup for gamers, supporting VRR, ALLM, G-Sync, FreeSync, and HDR Dolby Vision to deliver immersive, high-quality gaming experiences across a wide range of titles.

If you plan to connect a console or PC to the U7S Pro, you'll be more than happy – this TV is great for gamers. Hisense spared no expense and put in four HDMI 2.1 ports with full 48 Gbps bandwidth. So you won't have to juggle cables, since every port supports the full feature set. There's automatic low-latency mode (ALLM) and VRR, which works across a wide range from 48 Hz up to a cosmic 330 Hz. Of course that 330 Hz is for now a gimmick for owners of powerful PCs, because consoles are capped at 120 Hz anyway, but it's good to have that headroom for the future. The Game Bar is also really useful while gaming. It's a handy in-game menu where, without leaving the TV's main settings, you can quickly change the picture mode, enable a crosshair in the center of the screen, or even switch to an ultra-wide aspect ratio, which PC sim fans will appreciate. The only downside worth knowing about is the incorrect implementation of HGiG in games. The TV ignores the console's instructions for HDR10 output and keeps forcefully altering the image, trying to "improve" it its own way. Because of that, properly configuring HDR in the console menu (where you set brightness using the logo/checkerboard pattern) is a bit more difficult.