Philips OLED910 vs LG OLED B6

OLED910 is simply an absurdly bright television for an OLED. All thanks to the new panel from LG Display, the Tandem RGB OLED, which Philips has dubbed its "META OLED." It is this panel that allows for over 2000 nits of brightness in films, which was previously completely unattainable in OLEDs. The way the television handles full-screen scenes drenched in bright light is also commendable. Usually, in OLEDs, brightness drops significantly, but here it remains at an excellent level - around 1400 nits. These are almost reference values, and combined with the great color gamut reproduction at 99% DCI P3 and 82% BT.2020, it gives us an HDR effect that can confidently be called one of the best in the world.

The LG B6 is a moderately bright OLED. After calibration it reaches about 800 nits, roughly 200 nits more than last year’s B5. That’s thanks to the new budget OLED SE panel from LG Display. In practice it simply gives a bit more headroom and makes HDR in many scenes look fuller than on last year’s lower-tier OLEDs. That doesn’t mean the B6 has no limits. In very bright shots, when a large part of the screen is strongly lit, brightness can drop below 400 nits. This behavior is typical for OLED TVs (especially those from this segment) and that’s when you see the biggest difference versus more expensive models. All things considered, we rate the B6’s results as really solid. It’s still not a TV for breaking brightness records, but the HDR effect is strong enough that you can really feel the step up from ordinary SDR in films.

Color gamut

Using the OLED SE panel has slightly affected wide color gamut coverage. Compared with last year’s model, results fell by a few percentage points. DCI-P3 reaches about 96%, and BT.2020 around 71%. That doesn’t mean the colors on the LG B6 are weak. In most movies and series they look lively, well saturated and simply pleasing to the eye. You only notice a difference in very bright, highly colorful scenes. Then colors lose some intensity compared with QD-OLED panels. This comes from the WOLED panel construction. Besides red, green and blue subpixels it also uses a white subpixel that helps boost brightness. It comes at a cost: at very high luminance some color is effectively “diluted” by the white light, so saturation of some colors can be slightly lower. In everyday use this isn’t a big issue, but you can notice it in the most demanding scenes.

Update 01/2026

After a series of calibrations of the OLED910 model with our customers, we noticed that the measurement results differ from those we obtained during the initial tests. The factory tuning of the movie mode turns out to be significantly better than our first tests indicated. The white balance is set very precisely, with only a minimal red dominance. The factory color reproduction holds close to reference standards – the average Delta E errors hover around 3-4, which is an excellent result for factory settings. However, there is some concern about how the TV manages brightness. Analysis of the Gamma (SDR) and EOTF (HDR) graphs shows a tendency to excessively "pull" details from shadows. In practice, this means that the image can appear overly bright, resulting in a loss of black depth in favor of the visibility of details that should remain hidden. Of course, this effect can be effectively corrected during professional calibration.

Unfortunately, when it comes to color reproduction straight out of the box, in Filmmaker mode, the OLED910 performs really poorly. The TV overexposes the color blue, and at times it looks almost like a store mode. It gives the impression that the manufacturer has not quite tuned the device correctly. The effect is that the colors look unnatural, and the overall impression is somewhat reminiscent of an exaggerated display from a market showcase. HDR content presents itself much better, where aside from a slight loss of details in blacks, it's hard to find anything to complain about. The problem is that for everyday viewing, SDR materials are actually of the greatest importance – and on the OLED910, they simply look bad and fall significantly short of what we would expect from a TV of this class.

We tested the LG B6 in Filmmaker Mode, which is the best picture setting available right out of the box. ISF modes deliver very similar results, but in our tests we always stick to Filmmaker Mode for better comparison with other TVs. Each of those modes is, after all, a much better starting point than Vivid or Eco mode, where the picture is heavily boosted and noticeably less natural. With SDR content, the factory settings perform really well. Color errors are small, gamma behaves properly, and the image looks natural during ordinary viewing and does not seem overly "pumped up." It's a bit worse with HDR. When you play that kind of content you can quickly see that the white balance hasn't been set perfectly. Too much blue and red causes the image to shift toward a slightly pink tint. This is also confirmed by measurements of the color gamut and the ColorChecker, where samples clearly drift in that direction. It's not a flaw that completely ruins the picture, but you can notice it in HDR films. So people who care about the most faithful image should consider the calibration we describe later in the review.

Fortunately, it quickly turned out that it was not the panel that was responsible for the issues, but rather the way Philips had calibrated the OLED910 from the factory. After calibration, the television displayed its full potential, and only then could we see what the new panels produced by LG Display were truly capable of. We primarily corrected the white balance and brightness characteristics, which allowed us to tame the excessive blue and give the image a natural look. The final effect can be described as excellent. Errors on the Color Checker palette rarely exceeded a value of 3, which in practice means an image close to perfection and colors presented in accordance with the creators' intentions. In SDR content, the effect was remarkable, and in HDR, the improvement was even more noticeable – gradients became cleaner, and colors fuller and more believable. After calibration, the OLED910 transformed from a disappointing television into equipment that can easily be called reference-level in terms of color reproduction.

During calibration we focused primarily on HDR content, because that's where the factory settings required the biggest corrections. We didn't neglect SDR mode, though, which after adjustment was brought almost to perfection. Colors are very accurate and brightness is handled as it should be. The biggest improvement in HDR came from correcting the white balance. After removing the excess red and blue, the pinkish tint disappeared and the image became much more natural. Skin tones, whites and all colors that had been shifting toward magenta improved. After calibration most errors fell below a Delta E of 2–3, the threshold at which the average viewer stops noticing differences with the naked eye. The LG B6 can therefore deliver a very accurate image, especially for the manufacturer's entry-level OLED model.

The previously visible color artifacts can largely be eliminated thanks to a feature called "distortion reduction." Similar to the OLED820, it's best to set it to a medium level, as it then produces quite decent results – smoothing out unwanted tonal transitions while not taking away too many details from the image. Although there may be times when the effect is a bit too aggressive, it can generally be considered a useful feature for everyday viewing.

As for image scaling, the OLED910 performs really well. The test material with the model had a characteristic soft look typical of Philips – at times even too soft – but the sharpness slider can be adjusted at any moment to tailor the image to personal preferences. It's also worth noting that the TV has no issues with overscan, which still occurs in some competing models. It's a small detail, but it's pleasing because it means that all content, even the oldest, is displayed as it should be.

The LG B6 handles lower-quality sources very well. Much of the credit goes to effective digital image processing, which can mask some source imperfections without overly smoothing the whole scene. The feature "Smooth Gradation" proves particularly useful. It can significantly reduce posterization, which we mentioned earlier, especially in darker areas of the image. The safest choice remains Low or Medium. The function still effectively smooths harsh tonal transitions, but does not yet interfere too much with fine details. The most dedicated purists can, of course, leave it off. Upscaling to 4K also performs very well. Full HD and 720p content retain a good amount of detail, and the image is neither overly sharpened nor excessively blurred. Some limitations become noticeable only with very poor sources below 720p, where the smallest subtitles and fine elements are not always perfectly sharp, but this is true for almost every other TV on the market.

The OLED910 is a television with a refresh rate of 144 Hz. It's a bit disappointing that Philips didn't choose 165 Hz, because we know that the panel used in it is capable of that. On the other hand, such a bonus would mainly benefit PC gamers, as in everyday use, the most important refresh rate is 120 Hz, which is fully sufficient. Combined with the advantages of an OLED panel – lightning-fast pixel response time and no motion blur, the image is impeccably sharp and fast, even in dynamic action scenes. Kudos also goes to Philips' traditional motion smoother called "Motion Style." We can easily adjust it to our preferences: the "Smoothness" slider is for movies and allows you to choose between a more "frame-like," cinematic character and a smooth, theatrical image. Meanwhile, the "Blur Reduction" slider is for sports; it is worth setting it to the maximum value here to ensure that the image is clear and distinct during very fast shots.

One of the biggest advantages of OLED panels is their very fast pixel response time. This keeps the image sharp and prevents the visible smearing that often appears on LCD TVs. However, there is a downside. During slow camera pans, motion can look more choppy than on LCD screens, where the slower panel naturally masks some of that effect. Fortunately, on the LG B6 you can easily soften this with TruMotion. With the motion smoothing properly adjusted, you can achieve smoother motion without giving the picture an excessive soap-opera effect.

The OLED910 is excellent for gaming. It supports 144 Hz, so if someone has a powerful PC, they can easily take advantage of that potential. On consoles, 120 Hz is the most important, and everything works perfectly here. There is VRR, an automatic game mode, and even Dolby Vision in games along with an HGiG mode, so we actually get a full package of gaming features. Philips also added a Game Bar, which is a quick menu that shows basic information and allows you to enable a few useful things. It may not look as modern as the competition, but it works and serves its purpose. The only downside is the number of HDMI 2.1 ports. There are only two, which can be somewhat disappointing for a TV in this class. If someone is connecting two consoles and something additional to eARC - like a soundbar (which doesn't make much sense in this model, but we'll discuss that in the sound section), they'll need to figure things out a bit more. Other than that, the OLED910 has everything we expect from a gaming TV.

LG OLED B6 offers a powerful set of advantages for gamers; it's simply a complete platform for PS5, Xbox Series X/S, or a solid PC. It has four full-size HDMI 2.1 ports with 48 Gbps bandwidth, so you can skip the annoying cable swapping when you want to connect several newer devices at once. We get the full suite of sync technologies – from classic VRR to G-Sync and FreeSync. The screen seamlessly matches the refresh rate to the frame output produced by the console or graphics card. Of course ALLM is included: the B6 automatically detects a running game and immediately cuts input lag to a minimum. HDR handling is also excellent. The TV supports Dolby Vision, and a properly implemented HGiG standard means that after an initial calibration in the console settings the picture won’t suffer from blown-out highlights or lost detail in bright areas. The cherry on top is the Game Bar. Instead of digging through the full menu during gameplay, one click lets you adjust shadow visibility, tweak selected settings, or simply check the display’s current operating mode. All of this makes the LG B6 a great choice for gamers.