Philips OLED910 vs Hisense U7S Pro

OLED910 is simply an absurdly bright television for an OLED. All thanks to the new panel from LG Display, the Tandem RGB OLED, which Philips has dubbed its "META OLED." It is this panel that allows for over 2000 nits of brightness in films, which was previously completely unattainable in OLEDs. The way the television handles full-screen scenes drenched in bright light is also commendable. Usually, in OLEDs, brightness drops significantly, but here it remains at an excellent level - around 1400 nits. These are almost reference values, and combined with the great color gamut reproduction at 99% DCI P3 and 82% BT.2020, it gives us an HDR effect that can confidently be called one of the best in the world.

Let’s start with the fact that the U7S Pro is an impressively bright TV — in calibrated mode our measurement equipment showed a staggering 2200 nits of peak brightness!

As we know, peak brightness on test patterns is one thing, and actual film scenes are another. Unfortunately, in real video material the backlight output drops noticeably. The TV can still exceed the 1000-nit mark in the most demanding moments — which is still a great result and fits the mastering standards of most HDR films — but the real challenge lies in the aggressively tuned local dimming algorithms. Because of them, small, bright details like stars or the moon in a night sky are noticeably dimmed. The TV tries at all costs to maintain deep black, which is understandable, but unfortunately this comes at the expense of HDR’s dynamic range and brilliance.

The color reproduction is worth praising. The new U7S Pro is a QLED design that provides very wide color gamut coverage. Unlike last year’s model (U7Q Pro), this year’s variant is a true QLED, not a solution based on a PFS filter. As a result, color saturation has increased noticeably, and coverage of the most demanding BT.2020 color space has topped 81%.

Update 01/2026

After a series of calibrations of the OLED910 model with our customers, we noticed that the measurement results differ from those we obtained during the initial tests. The factory tuning of the movie mode turns out to be significantly better than our first tests indicated. The white balance is set very precisely, with only a minimal red dominance. The factory color reproduction holds close to reference standards – the average Delta E errors hover around 3-4, which is an excellent result for factory settings. However, there is some concern about how the TV manages brightness. Analysis of the Gamma (SDR) and EOTF (HDR) graphs shows a tendency to excessively "pull" details from shadows. In practice, this means that the image can appear overly bright, resulting in a loss of black depth in favor of the visibility of details that should remain hidden. Of course, this effect can be effectively corrected during professional calibration.

Unfortunately, when it comes to color reproduction straight out of the box, in Filmmaker mode, the OLED910 performs really poorly. The TV overexposes the color blue, and at times it looks almost like a store mode. It gives the impression that the manufacturer has not quite tuned the device correctly. The effect is that the colors look unnatural, and the overall impression is somewhat reminiscent of an exaggerated display from a market showcase. HDR content presents itself much better, where aside from a slight loss of details in blacks, it's hard to find anything to complain about. The problem is that for everyday viewing, SDR materials are actually of the greatest importance – and on the OLED910, they simply look bad and fall significantly short of what we would expect from a TV of this class.

We tested the U7S Pro, as we always do, in the best factory-tuned picture mode, Filmmaker Mode. The colors can be judged in two ways. The most disappointing was the profile intended for watching SDR content, i.e. traditional broadcast TV, YouTube, and other less demanding material. The image there was clearly yellowish, which turned out to be a direct consequence of a poorly set white balance. As our charts show, there's a large deficiency in the blue component, which drastically affected the overall color temperature. You can see this clearly on the ColorChecker charts and on the color gamut graphs themselves, where most samples shifted toward yellow. Fortunately, the factory HDR mode performed much better. There, color errors hovered around a Delta E of 3, which is a solid result.

Fortunately, it quickly turned out that it was not the panel that was responsible for the issues, but rather the way Philips had calibrated the OLED910 from the factory. After calibration, the television displayed its full potential, and only then could we see what the new panels produced by LG Display were truly capable of. We primarily corrected the white balance and brightness characteristics, which allowed us to tame the excessive blue and give the image a natural look. The final effect can be described as excellent. Errors on the Color Checker palette rarely exceeded a value of 3, which in practice means an image close to perfection and colors presented in accordance with the creators' intentions. In SDR content, the effect was remarkable, and in HDR, the improvement was even more noticeable – gradients became cleaner, and colors fuller and more believable. After calibration, the OLED910 transformed from a disappointing television into equipment that can easily be called reference-level in terms of color reproduction.

We know, however, that Hisense is capable of much more, as previous generations have shown, so we simply couldn't leave the U7S Pro's factory flaws in everyday content as they were. As always in such cases, we had the TV professionally calibrated. The result? The process brought a massive change. After manually correcting the white balance and filling in the missing blue component, the annoying yellow cast vanished as if it had been wiped away. Whites became naturally clean, and skin tones gained a proper, healthy hue. Importantly, the calibration not only tamed the finicky SDR mode but also squeezed the maximum potential out of the panel, reducing average color reproduction errors to levels almost imperceptible to the human eye. The only thing we still have to fault after the whole process is the nature of Mini-LED backlighting and its specific interaction with the HDR signal. Aggressively tuned local dimming algorithms quite strongly interfere with the EOTF luminance curve. As a result, the backlight doesn't always align with the creator's intent — depending on the scene, the curve can run noticeably above or below the reference, which in places disrupts the ideal dynamics of the HDR picture.

The previously visible color artifacts can largely be eliminated thanks to a feature called "distortion reduction." Similar to the OLED820, it's best to set it to a medium level, as it then produces quite decent results – smoothing out unwanted tonal transitions while not taking away too many details from the image. Although there may be times when the effect is a bit too aggressive, it can generally be considered a useful feature for everyday viewing.

As for image scaling, the OLED910 performs really well. The test material with the model had a characteristic soft look typical of Philips – at times even too soft – but the sharpness slider can be adjusted at any moment to tailor the image to personal preferences. It's also worth noting that the TV has no issues with overscan, which still occurs in some competing models. It's a small detail, but it's pleasing because it means that all content, even the oldest, is displayed as it should be.

The digital processing of lower-quality signals is top-notch here, thanks to the MediaTek Pentonic 800 processor used in the U7S Pro. Upscaling, the TV's ability to pull lower-resolution content up to 4K, also performs well. We didn't notice any unnatural, sharp contours on screen, and our test image with the model simply looked attractive.

The OLED910 is a television with a refresh rate of 144 Hz. It's a bit disappointing that Philips didn't choose 165 Hz, because we know that the panel used in it is capable of that. On the other hand, such a bonus would mainly benefit PC gamers, as in everyday use, the most important refresh rate is 120 Hz, which is fully sufficient. Combined with the advantages of an OLED panel – lightning-fast pixel response time and no motion blur, the image is impeccably sharp and fast, even in dynamic action scenes. Kudos also goes to Philips' traditional motion smoother called "Motion Style." We can easily adjust it to our preferences: the "Smoothness" slider is for movies and allows you to choose between a more "frame-like," cinematic character and a smooth, theatrical image. Meanwhile, the "Blur Reduction" slider is for sports; it is worth setting it to the maximum value here to ensure that the image is clear and distinct during very fast shots.

The Hisense U7S Pro uses a panel with a maximum 165 Hz refresh rate at 4K, and in game mode it can even reach 330 Hz at Full HD. However, it's worth remembering that those highest numbers don't matter much in everyday use, because most content still supports at most 120 Hz (for example when playing on a console). Even so, the TV handles motion quite well and performs well for an LCD design.

There's little to fault about the smoothness itself. In the menu you'll find a motion smoothing feature called "Motion Enhancement", which hides two sliders: blur reduction and judder reduction. They allow manual adjustment of the smoother, which works well for both movies and sports, effectively improving the raw TV signal.

The OLED910 is excellent for gaming. It supports 144 Hz, so if someone has a powerful PC, they can easily take advantage of that potential. On consoles, 120 Hz is the most important, and everything works perfectly here. There is VRR, an automatic game mode, and even Dolby Vision in games along with an HGiG mode, so we actually get a full package of gaming features. Philips also added a Game Bar, which is a quick menu that shows basic information and allows you to enable a few useful things. It may not look as modern as the competition, but it works and serves its purpose. The only downside is the number of HDMI 2.1 ports. There are only two, which can be somewhat disappointing for a TV in this class. If someone is connecting two consoles and something additional to eARC - like a soundbar (which doesn't make much sense in this model, but we'll discuss that in the sound section), they'll need to figure things out a bit more. Other than that, the OLED910 has everything we expect from a gaming TV.

If you plan to connect a console or PC to the U7S Pro, you'll be more than happy – this TV is great for gamers. Hisense spared no expense and put in four HDMI 2.1 ports with full 48 Gbps bandwidth. So you won't have to juggle cables, since every port supports the full feature set. There's automatic low-latency mode (ALLM) and VRR, which works across a wide range from 48 Hz up to a cosmic 330 Hz. Of course that 330 Hz is for now a gimmick for owners of powerful PCs, because consoles are capped at 120 Hz anyway, but it's good to have that headroom for the future. The Game Bar is also really useful while gaming. It's a handy in-game menu where, without leaving the TV's main settings, you can quickly change the picture mode, enable a crosshair in the center of the screen, or even switch to an ultra-wide aspect ratio, which PC sim fans will appreciate. The only downside worth knowing about is the incorrect implementation of HGiG in games. The TV ignores the console's instructions for HDR10 output and keeps forcefully altering the image, trying to "improve" it its own way. Because of that, properly configuring HDR in the console menu (where you set brightness using the logo/checkerboard pattern) is a bit more difficult.