Philips OLED770 vs Hisense U7S Pro

The Philips OLED770 does not attempt to compete with the brightest OLEDs on the market, and it would actually be hard to expect that, as it is the lowest model in Philips's series for 2025. In our measurements, it achieved a maximum brightness of about 700 nits, which allows for enjoyment of HDR effects in scenes where light appears point-wise – for example, in the flash of headlights or a starry sky. In such moments, the picture can truly impress. However, it is different when there are more bright elements on the screen. The television, like many cheaper OLEDs, limits brightness in those cases, and the entire picture noticeably dims. This was best seen in a scene from the movie The Meg, where the sun rises behind an oil rig – at that point, the brightness dropped to about 250 nits, nearly three times less. The HDR effect remains visually pleasing, but it is worth being aware that this model performs best in scenes with less intense light. Fortunately, the OLED770 has an ace up its sleeve – the coverage of the DCI-P3 color palette is as high as 99%, so colors in movies and games are saturated and very close to what the creator intended to convey.

Let’s start with the fact that the U7S Pro is an impressively bright TV — in calibrated mode our measurement equipment showed a staggering 2200 nits of peak brightness!

As we know, peak brightness on test patterns is one thing, and actual film scenes are another. Unfortunately, in real video material the backlight output drops noticeably. The TV can still exceed the 1000-nit mark in the most demanding moments — which is still a great result and fits the mastering standards of most HDR films — but the real challenge lies in the aggressively tuned local dimming algorithms. Because of them, small, bright details like stars or the moon in a night sky are noticeably dimmed. The TV tries at all costs to maintain deep black, which is understandable, but unfortunately this comes at the expense of HDR’s dynamic range and brilliance.

The color reproduction is worth praising. The new U7S Pro is a QLED design that provides very wide color gamut coverage. Unlike last year’s model (U7Q Pro), this year’s variant is a true QLED, not a solution based on a PFS filter. As a result, color saturation has increased noticeably, and coverage of the most demanding BT.2020 color space has topped 81%.

The first measurements already show that the factory settings of the Philips OLED770 have a lot to improve even in Filmmaker mode. The white balance chart clearly shows a lack of blue, which gives the image a slightly yellowish tint. In practice, the white is not snow-white, but leans towards warmer hues – which some may even like, but from the accuracy perspective, this is a deviation from the norm. The gamma, on the other hand, tends to be on the darker side – the average value is about 2.6 instead of the reference 2.4. In the mid-tones, the image appears muted and more saturated, which may look too "filmic," but takes away some naturalness. However, the biggest issues can be seen in color reproduction. The average error is relatively high, and some colors – especially shades of gray – clearly deviate from what should be seen. In everyday viewing, this means that sometimes colors may look less natural than we would wish.

We tested the U7S Pro, as we always do, in the best factory-tuned picture mode, Filmmaker Mode. The colors can be judged in two ways. The most disappointing was the profile intended for watching SDR content, i.e. traditional broadcast TV, YouTube, and other less demanding material. The image there was clearly yellowish, which turned out to be a direct consequence of a poorly set white balance. As our charts show, there's a large deficiency in the blue component, which drastically affected the overall color temperature. You can see this clearly on the ColorChecker charts and on the color gamut graphs themselves, where most samples shifted toward yellow. Fortunately, the factory HDR mode performed much better. There, color errors hovered around a Delta E of 3, which is a solid result.

Philips OLED770 has shown signs from the beginning that it houses significant potential, but it was difficult to fully see this in the factory settings. The image was sometimes too warm, and some colors seemed to have lost their naturalness along the way. However, calibration revealed that it is a television very receptive to adjustments – it reacted to every correction and almost immediately unveiled another layer of its capabilities. The white balance was successfully set both in SDR and HDR, eliminating the yellowish glow and presenting a neutral, clear white. Gamma stabilized closer to perfection, allowing midtones to regain their naturalness, and shadows no longer appeared artificially darkened, possibly even with a slight brightening effect. The effect was obvious... Movies are watched with greater ease; the image has cinematic depth, but without the feeling that something is exaggeratedly darkened. However, the most interesting part was the work on colors. Out of the box, the errors were not dramatic but slightly noticeable – skin tones were sometimes too warm, and gray didn’t always have the shade we expected. After calibration, the error values dropped to around 2, and in many cases even below 1. This is a level significantly lower than the threshold of perception for the human eye. In other words, after correction, the colors finally “clicked” into place. Looking at the screen, we had the impression that the television had begun to speak with a full voice. Like an instrument that has finally been well-tuned.

We know, however, that Hisense is capable of much more, as previous generations have shown, so we simply couldn't leave the U7S Pro's factory flaws in everyday content as they were. As always in such cases, we had the TV professionally calibrated. The result? The process brought a massive change. After manually correcting the white balance and filling in the missing blue component, the annoying yellow cast vanished as if it had been wiped away. Whites became naturally clean, and skin tones gained a proper, healthy hue. Importantly, the calibration not only tamed the finicky SDR mode but also squeezed the maximum potential out of the panel, reducing average color reproduction errors to levels almost imperceptible to the human eye. The only thing we still have to fault after the whole process is the nature of Mini-LED backlighting and its specific interaction with the HDR signal. Aggressively tuned local dimming algorithms quite strongly interfere with the EOTF luminance curve. As a result, the backlight doesn't always align with the creator's intent — depending on the scene, the curve can run noticeably above or below the reference, which in places disrupts the ideal dynamics of the HDR picture.

The problem of the previously mentioned color connections can largely be mitigated by the "distortion reduction" feature, which is an algorithm for smoothing tonal transitions in Philips TVs. It works best at a low setting—effectively eliminating unwanted color bands while not introducing strange artifacts or losing image detail. It's one of those features that is truly worth keeping switched on.

The issue with upscaling is somewhat less favorable. The image from a lower resolution can be too soft, while at the same time, distinctive "jaggies" appear in certain areas. The impression is that the algorithm is trying to reconcile two contradictory directions—smoothing and sharpening—and ultimately hasn't found the golden mean. As a consolation, it's worth noting that the television has no issues with overscan, meaning it doesn't cut off the edges of the image, which sometimes happens with other competing models.

The digital processing of lower-quality signals is top-notch here, thanks to the MediaTek Pentonic 800 processor used in the U7S Pro. Upscaling, the TV's ability to pull lower-resolution content up to 4K, also performs well. We didn't notice any unnatural, sharp contours on screen, and our test image with the model simply looked attractive.

The issue of the panel in the Philips OLED770 is not entirely straightforward. The manufacturer claims a 120 Hz panel, but our measurements showed that the screen can accept a 4K signal even at 144 Hz. This sounds like great news – because who wouldn't want an extra mode for PC gaming at this price? However, the reality turned out to be more complex. With 120 Hz materials, the television behaves like most OLEDs – the picture is absolutely clear, with no trace of ghosting or blurring, making it ideal for both fast-paced games and sports broadcasts. The problem arises only at 144 Hz. Unlike models with official support for that frequency, here we observe the phenomenon of so-called frame skipping. This means that the television is unable to display all frames – some of them are skipped, causing the motion to lose fluidity, and double outlines appear on the screen. The effect resembles the operation of the BFI function, which Philips does not offer in this model anyway.

The Hisense U7S Pro uses a panel with a maximum 165 Hz refresh rate at 4K, and in game mode it can even reach 330 Hz at Full HD. However, it's worth remembering that those highest numbers don't matter much in everyday use, because most content still supports at most 120 Hz (for example when playing on a console). Even so, the TV handles motion quite well and performs well for an LCD design.

There's little to fault about the smoothness itself. In the menu you'll find a motion smoothing feature called "Motion Enhancement", which hides two sliders: blur reduction and judder reduction. They allow manual adjustment of the smoother, which works well for both movies and sports, effectively improving the raw TV signal.

If someone is looking for a gaming TV, the Philips OLED770 is a candidate that's hard to ignore. The mere fact that we have an OLED here provides a great starting point – perfect blacks and infinite contrast make evening sessions in atmospheric games look like they’ve been pulled straight from the cinema. On top of that, there’s the Ambilight system, which features LEDs on the back of the TV that extend the image onto the wall behind the screen. The effect is such that even regular gameplay in FIFA can look like a small spectacle, and in horror games, the atmosphere becomes really intense. On the technical side, it’s pretty good as well. The Philips OLED770 supports Variable Refresh Rate (VRR) up to 120 Hz, has an automatic low latency mode for gamers (ALLM), and if someone is using an Xbox Series X, they can also count on Dolby Vision support in games. You just need to know that in this mode, input lag is slightly higher than standard, although still at an acceptable level. As a bonus, we get the “Game Bar” panel, which is a special tool strip for gamers. It's not the most conveniently designed solution, but it allows you to check key parameters without leaving the game. In total, this presents a picture of a TV that on one hand has all the most important gaming features, and on the other can add something unique – Ambilight. And it’s this mix of technology and visual effect that makes the OLED770 one of the better screens for gaming in a home environment.

If you plan to connect a console or PC to the U7S Pro, you'll be more than happy – this TV is great for gamers. Hisense spared no expense and put in four HDMI 2.1 ports with full 48 Gbps bandwidth. So you won't have to juggle cables, since every port supports the full feature set. There's automatic low-latency mode (ALLM) and VRR, which works across a wide range from 48 Hz up to a cosmic 330 Hz. Of course that 330 Hz is for now a gimmick for owners of powerful PCs, because consoles are capped at 120 Hz anyway, but it's good to have that headroom for the future. The Game Bar is also really useful while gaming. It's a handy in-game menu where, without leaving the TV's main settings, you can quickly change the picture mode, enable a crosshair in the center of the screen, or even switch to an ultra-wide aspect ratio, which PC sim fans will appreciate. The only downside worth knowing about is the incorrect implementation of HGiG in games. The TV ignores the console's instructions for HDR10 output and keeps forcefully altering the image, trying to "improve" it its own way. Because of that, properly configuring HDR in the console menu (where you set brightness using the logo/checkerboard pattern) is a bit more difficult.