Philips OLED770 vs Haier M95E

The Philips OLED770 does not attempt to compete with the brightest OLEDs on the market, and it would actually be hard to expect that, as it is the lowest model in Philips's series for 2025. In our measurements, it achieved a maximum brightness of about 700 nits, which allows for enjoyment of HDR effects in scenes where light appears point-wise – for example, in the flash of headlights or a starry sky. In such moments, the picture can truly impress. However, it is different when there are more bright elements on the screen. The television, like many cheaper OLEDs, limits brightness in those cases, and the entire picture noticeably dims. This was best seen in a scene from the movie The Meg, where the sun rises behind an oil rig – at that point, the brightness dropped to about 250 nits, nearly three times less. The HDR effect remains visually pleasing, but it is worth being aware that this model performs best in scenes with less intense light. Fortunately, the OLED770 has an ace up its sleeve – the coverage of the DCI-P3 color palette is as high as 99%, so colors in movies and games are saturated and very close to what the creator intended to convey.

If there is one category in which the Haier M95E undoubtedly shines, it is the HDR effect, driven by the raw power of the backlighting. This TV cannot be denied that it is a truly bright device. Both in most movie scenes and during our synthetic measurements, the panel easily achieved and often even exceeded the threshold of 1200-1500 nits. This directly translates to the viewing experience – the image has a striking impact and truly allows you to feel the magic of materials recorded in this format. However, one must be aware of a certain compromise. When particularly demanding scenes filled with small, yet intense bright spots appear on the screen, the M95E does not lose its punch nor dims, but it pays a different price for it. A very strong and noticeably distracting halo effect is generated around these bright elements. It is evident here that the algorithms controlling the dimming have been programmed to prioritize brightness and visibility of the smallest details, even if this comes at the cost of flawless black levels. We are not entirely convinced that this is the healthiest approach; however, it must be acknowledged that the overall capabilities of the M95E in this regard are quite substantial. A significant advantage is the fact that we are dealing with a Mini LED QLED construction. The use of a quantum dot layer brings tangible benefits in the form of wide color gamut coverage, which in our tests reached almost 96% of the DCI-P3 color space. This guarantees that the television has full predispositions to display vibrant and appropriately saturated colors.

The first measurements already show that the factory settings of the Philips OLED770 have a lot to improve even in Filmmaker mode. The white balance chart clearly shows a lack of blue, which gives the image a slightly yellowish tint. In practice, the white is not snow-white, but leans towards warmer hues – which some may even like, but from the accuracy perspective, this is a deviation from the norm. The gamma, on the other hand, tends to be on the darker side – the average value is about 2.6 instead of the reference 2.4. In the mid-tones, the image appears muted and more saturated, which may look too "filmic," but takes away some naturalness. However, the biggest issues can be seen in color reproduction. The average error is relatively high, and some colors – especially shades of gray – clearly deviate from what should be seen. In everyday viewing, this means that sometimes colors may look less natural than we would wish.

We evaluate every television primarily based on its default cinema mode – in this case "Film" – which theoretically should be the "best" and most accurate right out of the box. Unfortunately, with the Haier M95E, the word "best" is absolutely not synonymous with the word "good." Even during SDR viewing, the picture revealed obvious issues: white balance skewed too much towards red, and excessive, unnatural color saturation led to visible color deviations. Worse still, the M95E also has trouble managing brightness (gamma curve), excessively darkening the entire scene. Such behavior is hard to commend, as it directly causes details in the shadows to blend into a black blob, which are irretrievably lost.

However, the real disaster struck after switching to HDR material while still remaining in "Film" mode. It's hard to guess who came up with such a fantastic idea – or perhaps it was simply a complete oversight of this stage by Haier's engineers – but the image, instead of cinema fidelity, began to resemble the bright "Dynamic" mode. The white balance exposed huge issues with the blue color, which in turn resulted in unnatural sharpening and artificial oversaturation of the entire scene. As if that weren't enough, the EOTF curve characteristics ruthlessly revealed that the television also has fundamental problems with local dimming management in this setting. We haven't calibrated many Haiers in our career, but we know for sure now that the M95E definitely needs it.

Philips OLED770 has shown signs from the beginning that it houses significant potential, but it was difficult to fully see this in the factory settings. The image was sometimes too warm, and some colors seemed to have lost their naturalness along the way. However, calibration revealed that it is a television very receptive to adjustments – it reacted to every correction and almost immediately unveiled another layer of its capabilities. The white balance was successfully set both in SDR and HDR, eliminating the yellowish glow and presenting a neutral, clear white. Gamma stabilized closer to perfection, allowing midtones to regain their naturalness, and shadows no longer appeared artificially darkened, possibly even with a slight brightening effect. The effect was obvious... Movies are watched with greater ease; the image has cinematic depth, but without the feeling that something is exaggeratedly darkened. However, the most interesting part was the work on colors. Out of the box, the errors were not dramatic but slightly noticeable – skin tones were sometimes too warm, and gray didn’t always have the shade we expected. After calibration, the error values dropped to around 2, and in many cases even below 1. This is a level significantly lower than the threshold of perception for the human eye. In other words, after correction, the colors finally “clicked” into place. Looking at the screen, we had the impression that the television had begun to speak with a full voice. Like an instrument that has finally been well-tuned.

The calibration process left us with extremely mixed feelings. On one hand, we noted significant success in the area of colorimetry. Utilizing the options available in the menu, we managed to tame the white balance and bring it down to an acceptable level. As a result, SDR content was finally freed from the annoying red dominance, and the HDR image no longer resembled a vibrant, store demonstration mode. The entire color palette and its saturation were also clearly corrected – perhaps not perfectly, but to the extent that the software allowed, and the difference was visible to the naked eye.

Unfortunately, this is where our list of corrections basically ends, as M95E simply did not allow for more. As we indicated earlier, most settings related to image brightness do not respond to our commands at all. This means we were unable to control its fundamental characteristics in any way – neither the gamma curve nor the EOTF. In practice, the television in SDR content still tends to darken details, which was confirmed by the inflated gamma, merging details in the shadows. On the other hand, the EOTF curve in HDR mode still mercilessly exposed all the previously mentioned issues with chaotic local dimming zone management. And while the calibration process itself yielded quite a lot, removing most of the color issues, ultimately we had to capitulate.

The problem of the previously mentioned color connections can largely be mitigated by the "distortion reduction" feature, which is an algorithm for smoothing tonal transitions in Philips TVs. It works best at a low setting—effectively eliminating unwanted color bands while not introducing strange artifacts or losing image detail. It's one of those features that is truly worth keeping switched on.

The issue with upscaling is somewhat less favorable. The image from a lower resolution can be too soft, while at the same time, distinctive "jaggies" appear in certain areas. The impression is that the algorithm is trying to reconcile two contradictory directions—smoothing and sharpening—and ultimately hasn't found the golden mean. As a consolation, it's worth noting that the television has no issues with overscan, meaning it doesn't cut off the edges of the image, which sometimes happens with other competing models.

Well, what happens with those color transitions when lower quality material full of compression artifacts comes on screen? Unfortunately, we have some bad news for you. Although we can find an option in the menu responsible for smoothing tonal transitions in older content, we definitely DO NOT RECOMMEND using it. Its activation causes a barrage of additional, ugly artifacts, noticeably blurring the entire image, and the funniest part – it often doesn’t even remove those unwanted “stairs” it was supposed to fight against. This feature might as well not exist at all.

We can write many more positive things about the overall upscaling, which is the process of raising lower resolutions to the native 4K matrix. The image after upscaling looks really good – it's neither overly jagged nor artificially smoothed. In this particular matter, the M95E simply delivers.

The issue of the panel in the Philips OLED770 is not entirely straightforward. The manufacturer claims a 120 Hz panel, but our measurements showed that the screen can accept a 4K signal even at 144 Hz. This sounds like great news – because who wouldn't want an extra mode for PC gaming at this price? However, the reality turned out to be more complex. With 120 Hz materials, the television behaves like most OLEDs – the picture is absolutely clear, with no trace of ghosting or blurring, making it ideal for both fast-paced games and sports broadcasts. The problem arises only at 144 Hz. Unlike models with official support for that frequency, here we observe the phenomenon of so-called frame skipping. This means that the television is unable to display all frames – some of them are skipped, causing the motion to lose fluidity, and double outlines appear on the screen. The effect resembles the operation of the BFI function, which Philips does not offer in this model anyway.

When it comes to motion fluidity and ghosting, our feelings are quite mixed because the M95E is a paradoxical television. Let’s start with the absolute delights: the heart of the device is a 144Hz panel, but what truly impresses is its performance with 120Hz content, which is crucial for sports and console gaming. We must state with full responsibility that Haier has equipped the television with one of the best VA panels currently available on the market when it comes to minimizing ghosting. It is rare to encounter an LCD panel that offers such clean, sharp, and ghost-free motion. In this respect, the M95E is simply phenomenal.

And this is exactly why the unpleasant surprise waiting for us on the software side is so painful. It turns out that this fantastic hardware potential is completely untapped, as the television practically offers no functioning options for improving fluidity. The smoothing systems, which should assist with lower frame rate content, can indeed be found in the Menu but essentially do not respond to our settings. The conclusion is brutally simple: if you intend to watch high fluidity material, you must be sure that the source is transmitting it natively at 120. In every other case, you must resign yourself to a rather raw, choppy image because the M95E will not help smooth it out in any way.

If someone is looking for a gaming TV, the Philips OLED770 is a candidate that's hard to ignore. The mere fact that we have an OLED here provides a great starting point – perfect blacks and infinite contrast make evening sessions in atmospheric games look like they’ve been pulled straight from the cinema. On top of that, there’s the Ambilight system, which features LEDs on the back of the TV that extend the image onto the wall behind the screen. The effect is such that even regular gameplay in FIFA can look like a small spectacle, and in horror games, the atmosphere becomes really intense. On the technical side, it’s pretty good as well. The Philips OLED770 supports Variable Refresh Rate (VRR) up to 120 Hz, has an automatic low latency mode for gamers (ALLM), and if someone is using an Xbox Series X, they can also count on Dolby Vision support in games. You just need to know that in this mode, input lag is slightly higher than standard, although still at an acceptable level. As a bonus, we get the “Game Bar” panel, which is a special tool strip for gamers. It's not the most conveniently designed solution, but it allows you to check key parameters without leaving the game. In total, this presents a picture of a TV that on one hand has all the most important gaming features, and on the other can add something unique – Ambilight. And it’s this mix of technology and visual effect that makes the OLED770 one of the better screens for gaming in a home environment.

When it comes to features for gamers, the Haier M95E presents some really strong arguments. First of all, it is fully ready for the new generation of consoles and powerful PCs. It is equipped with two full-fledged HDMI 2.1 ports, which handle 4K signals at 120Hz effortlessly and even allow for gaming at 144Hz. This is a foundation that guarantees us full utilization of the potential of our equipment. Moreover, the key technologies work flawlessly here. The television accurately detects the console and automatically switches to low latency mode (ALLM), so we don’t have to dig into the settings. The frame synchronization (VRR) also works smoothly, eliminating the annoying tearing of the image when the game's fluidity slightly drops. Considering the remarkably low motion blur of the panel, which we have already mentioned, the M95E creates a truly comfortable and responsive gaming environment. Of course, this is not a perfect package. A dedicated "Game Bar," which would be a handy menu for gamers, would be a nice addition, but in essence, it is just a nice extra. A more serious shortcoming is the lack of support for the HGiG standard, which complicates the ideal HDR configuration on the console and can lead to overexposures. Despite these shortcomings, the basic "gaming package" offered by the M95E is really solid and fully functional.