LG QNED86A / QNED85A / QNED87A vs PHILIPS PUS9010 (IPS)

Against the backdrop of contrast and black, the brightness of the QNED86A and the overall HDR effect performs much better. This is a television that can reach around 700 nits in the best conditions, so in terms of brightness alone, there is nothing to be ashamed of. As a result, scenes with strong lights, explosions, flashes, or bright parts of the landscape look clear and can make an impression. Interestingly, even in more challenging moments with small, contrasting elements on the screen, the television handles their backlighting well, and the details are quite visible. The problem resurfaces when there are a lot of dark tones. The lack of effective local dimming causes black to virtually disappear, and instead, we get a gray glow spreading across the entire screen. This kills the sense of depth and makes the image look flat, as if it lacks a cinematic quality. In bright animations or colorful family films, this won't be an issue because colors and bright light dominate there. But in horrors or productions set in darkness, these limitations are very palpable. As a consolation, it’s worth mentioning that the QNED86A is actually a QLED television with a PFS LED filter, which gives it very good coverage of wide color gamuts. Both the DCI-P3 palette and the wider BT.2020 perform really solid here. This ensures that colors in HDR films are saturated, vibrant, and have the right depth – even if the black itself disappoints, the colors can save the viewing experience and make the image look attractive.

In the Philips PUS9010 version with an IPS panel, HDR brightness unfortunately falls short compared to the previously tested 55-inch variant with a VA panel. The difference is about 100 nits, which is clearly noticeable given the relatively low values. While the VA version could exceed 500 nits, here the maximum brightness reaches around 400 nits. This level still allows for watching movies and series in HDR, especially on streaming platforms, but the effects are clearly more subdued. Bright elements do not have as much impact, and scenes requiring high luminance appear less impressive. On the positive side, the coverage of the DCI-P3 color palette is commendable. The IPS version offers about 91%, which is roughly 5% more than the variant with the VA panel. This translates to slightly better color saturation in HDR content, despite the lower brightness. Colors can appear more vivid and consistent, particularly in colorful scenes.

We primarily tested the QNED86A in Filmmaker mode, which is designed to provide the most accurate picture. Unfortunately, right out of the box, there were quite a few shortcomings. The most noticeable issue was the poorly adjusted white balance – there was a lack of blue, causing the overall image to lean slightly yellow, and at times, even orange. An even bigger problem turned out to be the way the television manages brightness. Due to its technical limitations – namely, local dimming that only works along the edges of the screen – the QNED86A tends to over-brighten entire scenes. This is where the flattening effect we mentioned earlier comes from. Instead of distinct depth and contrast, we get something akin to "boosted brightness," which can strain the eye over time.

We assessed color reproduction, as always, using factory settings, focusing on movie mode, which in the case of Philips usually offers the best starting point. This is also a good moment to show how much the same TV model can vary depending on the panel used. Looking at white balance, the overall trend remains similar to the variant with a VA panel. There is still excessive red in the whites, but in the tested unit with an IPS panel, there are also deficiencies in the blue channel. As a result, the image has a slightly different color character, which can be clearly seen in the comparative materials. This is a very good example showing why ready-made settings downloaded from the internet may not always work even within the same model.

However, returning to the assessment itself, this unit performs quite well, especially in SDR content. Color tests show correct saturation and color consistency, without glaring errors that could interfere with everyday viewing. In HDR materials, slight deficiencies in reds are already noticeable, but these are not flaws that completely ruin the perception of the image. The biggest limitations do not stem directly from the colors but rather from whites and blacks. The use of an IPS panel and slightly lowered gamma results in the image being slightly boosted in brightness, while the weak black further affects perceived contrast. This makes the overall look brighter, but at the same time, it loses depth, especially during evening viewing.

What was saved in the QNED86A6A is undoubtedly the colors. After calibration, the white balance was set with great precision, resulting in deviations on the Colour Checker palette mostly not exceeding the threshold of visibility for the human eye. In other words – the colors finally looked natural, without strange yellow or orange tones that previously ruined the experience. Unfortunately, even the best calibration cannot bypass design limitations. The already mentioned very modest number of local dimming zones and their unfortunate placement made the analysis of the EOTF curve in films still show clear over-brightening of scenes. The image tended to flatten, lacking cinematic depth. Fortunately, this effect is not as noticeable in older productions or SDR content. There, calibration really does its job and allows taming the QNED in such a way that the image can be pleasing. However, the specifics of this design – especially the contrast issues – cannot be entirely overcome.

After calibration, the image was brought to a really reasonable level. Everything looks coherent and natural, and when it comes to color reproduction, it's hard to definitively state whether we have a VA or IPS panel. This is a good sign, showing that the TV has a solid foundation for further adjustments. It's worth noting the larger color gamut coverage in this variant, which can slightly improve the reception of colorful scenes, especially in HDR content. However, this advantage is largely counterbalanced by the elevated blacks, resulting from the use of an IPS panel. Limited black depth affects perceived contrast, especially when watching in a dark room. As a result, despite the noticeable improvement after calibration, the final assessment remains the same as in the variant with a VA panel. Better colors are not able to fully compensate for the weaker blacks.

If someone is worried about possible "steps" when connecting colors, there is a simple way in the QNED86A. Just turn on the feature called Smooth Gradation and set it to medium level. Then the TV really smooths out all those unwanted transitions – especially in older productions – and does it in such a way that the film grain doesn't disappear, nor do strange artifacts appear. In other words, you can use it without worry.

The upscaling itself also turns out quite well. Of course, there are no miracles here – with lower quality sources, you can observe characteristic jaggedness. Fortunately, there is a sharpness slider in the menu, and if someone prefers a more "softer" image, it can be quickly adjusted to their taste.

In the Philips PUS9010, we find another iteration of the P5 Perfect Picture image processor, which aims to improve the quality of weaker materials. One of the components of this system is the distortion reduction function, responsible for smoothing tonal transitions. It works effectively and actually reduces visible color gradation. Unfortunately, it does so rather aggressively. In practice, it can dull details such as material textures or film grain. This is a clear compromise, so we wouldn't recommend it for movie screenings. It performs much better with looser content, like YouTube or regular television. The P5 processor also handles lower resolution materials quite well. The image is soft, sometimes even too soft, but it can easily be adjusted with the sharpness slider, tailoring the effect to personal preferences. Additionally, the lack of edge cropping in SD materials is a plus, which is still not standard in this class of televisions.

The QNED86A is equipped with a 120 Hz refresh rate panel, so right from the start, it's safe to say that it's suitable for both sports and gaming. And indeed, this is true – the image looks smooth, and motion blur is not very noticeable. IPS panels have always had some issues with this, and you can sometimes notice slight blurring here as well, especially in very dynamic scenes, but it's not something that ruins watching a match or a fast-paced game. For movie and sports fans, LG has added the traditional TruMotion smoother. In the menu, we have two sliders – one for movies (De-Judder), the other for sports (De-Blur). The first adds missing frames and allows you to adjust the character of motion – from raw, cinematic to more fluid, "theatrical." The second enhances sharpness during dynamic actions, so it's worth turning it up a bit if you're watching a lot of sports.

Philips PUS9010 has a 4K panel with a refresh rate of 144 Hz, which will be appreciated primarily by sports fans and gamers. This is especially evident in dynamic scenes where motion is sharp, and annoying trailing is nearly absent. When it comes to movies (standard 24 fps), Philips provides us with a proven set of settings known from higher series. Two sliders are used to control motion. The “Smoothness” slider allows you to adjust the image to your taste: at low settings, we maintain a cinematic character, while moving the slider to the right gives us a perfectly smooth, albeit slightly “theatrical” effect. On the other hand, the “Motion Blur Reduction” is a feature made for sports – it ensures that fast objects do not lose details and remain clear.

In terms of gaming, the LG QNED86A6A is a complete tool. It features four HDMI 2.1 ports with full bandwidth of 48 Gb/s, which means that whether you connect a PlayStation 5, Xbox Series X, or a powerful PC – everything will work at full 4K 120 Hz with support for all features. This is a big plus, as some competitors still have only two such ports, which can be problematic with a larger number of devices. It also has VRR, or variable refresh rate, which eliminates screen tearing, and ALLM, which automatically activates game mode when the console is turned on. There’s also Dolby Vision Gaming and a proper implementation of the HGiG format, so titles supporting these formats look more vivid and detailed. Added to all of this is the Game Optimizer – a kind of control center for the gamer. From this level, you can view image parameters in real-time, quickly change modes, activate additional features, or adjust image settings to your preferences. The LG QNED86A6A essentially has everything one can expect from a modern gaming television.

The Philips PUS9010 is truly a solid machine for gaming. It has everything that matters: VRR, automatic game mode (ALLM), and support for HGiG. The latter is a great feature—it allows HDR in games to be set exactly as the creators envisioned. The television handles 120 Hz refresh rates effortlessly at every popular resolution (1080p, 1440p, and 4K). It doesn't matter if you connect a PS5, Xbox, or a powerful PC—everything runs smoothly and just as it should. Gamers will also appreciate the Game Bar. It's a quick, clear menu that immediately shows whether low latency mode is active. This is especially useful when frequently switching between different consoles. The experience is completed by Ambilight. Evening sessions with this lighting are on a whole different level; the image seems larger, and dynamic scenes leave an even better impression. Even if someone isn’t a fan of such “gimmicks,” it’s hard to deny that it’s impressive.