LG OLED B6 vs Philips OLED811

The LG B6 is a moderately bright OLED. After calibration it reaches about 800 nits, roughly 200 nits more than last year’s B5. That’s thanks to the new budget OLED SE panel from LG Display. In practice it simply gives a bit more headroom and makes HDR in many scenes look fuller than on last year’s lower-tier OLEDs. That doesn’t mean the B6 has no limits. In very bright shots, when a large part of the screen is strongly lit, brightness can drop below 400 nits. This behavior is typical for OLED TVs (especially those from this segment) and that’s when you see the biggest difference versus more expensive models. All things considered, we rate the B6’s results as really solid. It’s still not a TV for breaking brightness records, but the HDR effect is strong enough that you can really feel the step up from ordinary SDR in films.

Color gamut

Using the OLED SE panel has slightly affected wide color gamut coverage. Compared with last year’s model, results fell by a few percentage points. DCI-P3 reaches about 96%, and BT.2020 around 71%. That doesn’t mean the colors on the LG B6 are weak. In most movies and series they look lively, well saturated and simply pleasing to the eye. You only notice a difference in very bright, highly colorful scenes. Then colors lose some intensity compared with QD-OLED panels. This comes from the WOLED panel construction. Besides red, green and blue subpixels it also uses a white subpixel that helps boost brightness. It comes at a cost: at very high luminance some color is effectively “diluted” by the white light, so saturation of some colors can be slightly lower. In everyday use this isn’t a big issue, but you can notice it in the most demanding scenes.

Philips OLED811 uses the new generation WOLED EX panels, also found in models like the LG C6 and Samsung S90H. After calibration we measured around 1500 nits, which is a very good result for an OLED TV. You can see it clearly in movies and series. All kinds of light flashes have the right intensity, especially when they appear on a dark background. In such scenes the OLED811 can deliver truly impressive HDR. Of course, that doesn't mean you'll see that peak brightness in every shot. When the screen is filled with a large area of white or a big explosion, brightness falls to around 600 nits. That's still a good result, but those scenes no longer have the same punch as small, bright elements on a dark background. This is a known limitation of OLEDs, and the OLED811 is no exception.

Colors

Aside from HDR brightness, colors also matter, and Philips performs very well here too. It covers almost the entire DCI-P3 gamut, which contains most of the colors used in HDR movies and series. So you get rich reds and lush greens, and while watching it's hard to find major faults in this area. It looks a bit worse with the much wider BT.2020 gamut — its most saturated shades are already beyond the reach of this panel. Added to that is the issue of the white subpixel the WOLED panel uses to help boost brightness. With very bright colors you can see some "whitening": the color is bright but loses some of its saturation. In exactly these situations QD-OLED panels from Samsung Display have the advantage. In most movies and series, however, this won't be something that immediately stands out.

We tested the LG B6 in Filmmaker Mode, which is the best picture setting available right out of the box. ISF modes deliver very similar results, but in our tests we always stick to Filmmaker Mode for better comparison with other TVs. Each of those modes is, after all, a much better starting point than Vivid or Eco mode, where the picture is heavily boosted and noticeably less natural. With SDR content, the factory settings perform really well. Color errors are small, gamma behaves properly, and the image looks natural during ordinary viewing and does not seem overly "pumped up." It's a bit worse with HDR. When you play that kind of content you can quickly see that the white balance hasn't been set perfectly. Too much blue and red causes the image to shift toward a slightly pink tint. This is also confirmed by measurements of the color gamut and the ColorChecker, where samples clearly drift in that direction. It's not a flaw that completely ruins the picture, but you can notice it in HDR films. So people who care about the most faithful image should consider the calibration we describe later in the review.

The movie mode on the Philips OLED811 is sensibly configured right out of the box. Most color errors are minor, both in SDR and HDR, so you can sit down and watch without first adjusting the settings. There are no major inaccuracies that would immediately pull attention away from the film.

It's not perfect, though. The white balance shows a slight deficiency of red compared with green, so whites and grays can have a faint greenish tint. It's not a strong cast, but measurements clearly show it. There are also small brightness deviations in SDR: some areas of the picture are slightly lifted, and the deepest blacks aren't always rendered evenly. In HDR the TV tracks the reference much more closely, although in places it slightly pulls details out of the shadows. These are generally things to refine. The factory movie mode provides a good starting point, and calibration will show how much more you can get out of it.

During calibration we focused primarily on HDR content, because that's where the factory settings required the biggest corrections. We didn't neglect SDR mode, though, which after adjustment was brought almost to perfection. Colors are very accurate and brightness is handled as it should be. The biggest improvement in HDR came from correcting the white balance. After removing the excess red and blue, the pinkish tint disappeared and the image became much more natural. Skin tones, whites and all colors that had been shifting toward magenta improved. After calibration most errors fell below a Delta E of 2–3, the threshold at which the average viewer stops noticing differences with the naked eye. The LG B6 can therefore deliver a very accurate image, especially for the manufacturer's entry-level OLED model.

After calibration the Philips OLED811 produces an image very close to the reference. We managed to even out the white balance and remove the subtle color cast visible in the factory settings. Errors in Color Checker measurements for SDR and HDR dropped to around 1 to 2, and many samples even fall below 1. That's a level at which it's hard to spot differences from the reference image with the naked eye. We also improved the gamma, and only in the brightest whites a slight brightening remains. In HDR the EOTF curve also stays close to the reference, although the TV still tends to slightly boost the brightness of small elements like stars or subtitles. That gives the image a bit of extra glow that shouldn't be there, but otherwise there's little to complain about. It was already good out of the box, and after calibration we managed to refine most of the remaining shortcomings.

The LG B6 handles lower-quality sources very well. Much of the credit goes to effective digital image processing, which can mask some source imperfections without overly smoothing the whole scene. The feature "Smooth Gradation" proves particularly useful. It can significantly reduce posterization, which we mentioned earlier, especially in darker areas of the image. The safest choice remains Low or Medium. The function still effectively smooths harsh tonal transitions, but does not yet interfere too much with fine details. The most dedicated purists can, of course, leave it off. Upscaling to 4K also performs very well. Full HD and 720p content retain a good amount of detail, and the image is neither overly sharpened nor excessively blurred. Some limitations become noticeable only with very poor sources below 720p, where the smallest subtitles and fine elements are not always perfectly sharp, but this is true for almost every other TV on the market.

The OLED811 handles lower-quality content reasonably well, though it's far from perfect. The "Artifact Reduction" feature helps smooth tonal transitions and on the low setting delivers a pretty good result. It doesn't remove banding between shades as effectively as similar solutions from some competitors, but at least it doesn't introduce new artifacts. That's a sensible setting for everyday viewing. Still, there's some disappointment, because the MediaTek Pentonic 800 chip used here can, in other manufacturers' implementations, deal more effectively with heavy compression even at similarly low settings. A lot therefore depends on how each manufacturer uses its capabilities. We have a few more reservations about the 4K upscaling itself. There is plenty of detail, but the overall image looks fairly soft. Edges are heavily smoothed, which robs the picture of some sharpness and clarity. You can partly correct that with the sharpness slider in the menu, though that will just emphasize outlines rather than recover detail. On the plus side, there is no overscan, so even with an SD signal the TV does not crop the edges of the picture.

One of the biggest advantages of OLED panels is their very fast pixel response time. This keeps the image sharp and prevents the visible smearing that often appears on LCD TVs. However, there is a downside. During slow camera pans, motion can look more choppy than on LCD screens, where the slower panel naturally masks some of that effect. Fortunately, on the LG B6 you can easily soften this with TruMotion. With the motion smoothing properly adjusted, you can achieve smoother motion without giving the picture an excessive soap-opera effect.

In terms of motion handling, the OLED811 performs excellently. At 120 Hz, which is useful for console gaming and watching sports, the image stays clear and moving objects don’t leave noticeable trails. The fast response of OLED pixels helps here; you can see it clearly in the UFO test, even on dark backgrounds. There are also motion-smoothing controls. For movies you can adjust the strength of smoothing to your taste, ranging from preserving a cinematic feel to much smoother motion. A separate motion blur reduction control is useful for fast-paced content like live sports broadcasts.

LG OLED B6 offers a powerful set of advantages for gamers; it's simply a complete platform for PS5, Xbox Series X/S, or a solid PC. It has four full-size HDMI 2.1 ports with 48 Gbps bandwidth, so you can skip the annoying cable swapping when you want to connect several newer devices at once. We get the full suite of sync technologies – from classic VRR to G-Sync and FreeSync. The screen seamlessly matches the refresh rate to the frame output produced by the console or graphics card. Of course ALLM is included: the B6 automatically detects a running game and immediately cuts input lag to a minimum. HDR handling is also excellent. The TV supports Dolby Vision, and a properly implemented HGiG standard means that after an initial calibration in the console settings the picture won’t suffer from blown-out highlights or lost detail in bright areas. The cherry on top is the Game Bar. Instead of digging through the full menu during gameplay, one click lets you adjust shadow visibility, tweak selected settings, or simply check the display’s current operating mode. All of this makes the LG B6 a great choice for gamers.

OLED811 has almost everything you could expect from a gaming TV. It supports 120 Hz at Full HD, 1440p and 4K resolutions, and when connected to a PC can reach 165 Hz. It also has VRR, which helps avoid screen tearing with variable frame rates, and ALLM, which automatically switches to game mode. So you don't have to dig into the settings every time you power up your console.

HGiG also works correctly, so once you enable HDR on the console the TV doesn't apply its own brightness adjustments. There's also a Game Bar that lets you check signal parameters and quickly change settings useful while gaming. The list even includes Dolby Vision for games, but there's a significant catch, which you'll read about below.