Hisense U7S / U77SE vs Philips PQS9011 / PQS9001 (The One 2026)

The Hisense U7S has considerable HDR potential, but it can't use it in every scene. On a test pattern it reaches around 1,100 nits, so the backlight itself is very strong. In our brighter film scenes we measured about 640 to 745 nits. That's still enough for the sun or bright highlights to have a noticeable glow and to show an advantage over SDR material. When the TV needs to illuminate a larger portion of the image, it does quite well.

The problem appears with small lights on a dark background. Each of the 192 zones covers an area much larger than a tiny point on the screen. If the TV were to strongly light such a zone, it would also brighten the surrounding area along with the light. Hisense tries to avoid that and dims the entire zone. Black levels therefore look better, but a small bright object that should draw the eye also loses intensity. That's why in two tougher scenes we recorded only 297 and 154 nits. The difference is large: in one shot HDR can impress, and in the next small lights are noticeably muted. The U7S therefore prioritizes maintaining deep blacks, even at the expense of bright details. With this number of zones that's an understandable compromise, but it's worth remembering — the 1,100-nit peak tells us about the backlight's capability, not how brightly the TV will render every element of a film.

Colors

Hisense calls the U7S ULED, but that's a marketing name; the wider color gamut here comes from a PFS phosphor backlight. In our measurements the TV covered about 91% of DCI-P3 and 71% of BT.2020. Those are good results, although it falls short of the best screens on the market. The biggest shortfall is in green — the TV doesn't even reach the DCI-P3 target there, so the most saturated shades will be less intense than they should be. Most colors in HDR films and series, however, still look suitably rich. A positive is the repeatability of the results. Gamut coverage on test patterns and in film scenes is practically identical.

Philips PQS9000 is a moderately bright TV; in our HDR scenes it reached roughly 450 to just over 500 nits. That's enough to notice a difference versus SDR. Sun reflections, lamps, and highlights have a bit more sparkle than on basic TVs, whose brightness often tops out around 300 nits. However, it’s not at a level where bright elements make a particularly strong impression. The biggest limitation remains contrast. Without local dimming, the TV raises the black level around a bright object when it brightens that object. That means there’s no clear separation between strong highlights and a dark background, and that contrast is what really shows off HDR. The PQS9000 offers more than the cheapest models, but despite decent brightness the effect stays fairly basic.

Colors

Philips deserves praise for the colors. Although the manufacturer labels this model QLED, a PFS phosphor is used here instead of quantum dots. That solution does not prevent good results, however. On test patterns and in measurements of film scenes we recorded about 94% DCI-P3 coverage and 75% BT.2020. For this class of TV that’s really good. In practice, it means the vast majority of colors used in HDR movies and series will have proper saturation. Lush greens and intense reds are not a major problem and add appeal to the picture. Limitations are easier to spot in some games and rarer content that uses the most saturated shades of the wide BT.2020 gamut. In those situations, displays with wider color coverage, such as SQD or RGB LED, can show more. In its price segment the PQS9000 has nothing to be ashamed of.

The out-of-the-box colors on the Hisense U7S are decent, but there are a few things to improve. In SDR there's a red bias in the white balance, which makes the image too warm and in places slightly pink. You can notice this on faces and on bright, neutral surfaces. Gamma also runs below the reference, so the TV brightens the image, especially in darker areas. That makes shadow details easier to see, but the scene loses some of its depth.

In HDR the white balance is a bit more even, but not completely neutral; midtones lack blue, and the brightest areas lack red. A bigger problem is how brightness is reproduced. The EOTF curve shows that a large portion of midtones is being brightened, so the image looks brighter than the source material intends. Color Checker measurements also perform worse than in SDR: many errors are around 3 to 4, and individual ones reach as high as 8. Colors can therefore look attractive, but they are not always faithful to what we should be seeing. There's room for improvement, and we'll check how much can be corrected with calibration.

Unfortunately, the PQS9000’s factory picture settings for Film mode need some fine-tuning. In SDR the biggest issue is an excess of red in the white balance, which makes whites, grays, and skin tones too warm, sometimes even slightly pink. On top of that, the gamma runs below the target across most of its range. The TV therefore brightens midtones and highlights, making the overall image look flatter than it should.

In HDR the white balance itself is much better. Aside from minor deviations, the components stay close to each other, so there isn’t the pronounced tint seen in SDR. However, the EOTF curve shows a slight brightening of parts of the image, and the biggest issue appears in measurements of the wide color gamut. Many hues deviate significantly from the reference, with errors reaching 8–9. So the good gamut coverage we praised earlier doesn’t mean the TV hits specific colors accurately. It can display a wide color range, but out of the box it doesn’t use it very precisely.

Calibration of the Hisense U7S helped most with SDR content. We managed to even out the white balance, so the previous warm cast is gone and whites and grays look neutral. Gamma is also now very close to the reference, and the TV no longer brightens the image unnecessarily, so darker scenes have regained depth. Color Checker measurements confirm the improvement: most errors fall below 2. That yields a really well-calibrated picture for regular TV and SDR movies. It didn't go as smoothly in HDR. The TV lacks an effective way to correct the EOTF curve, so Hisense still interprets the content's brightness a bit on its own. It brightens parts of the image and can dim the brightest elements depending on the scene and the local dimming behavior. Calibration couldn't eliminate this. It shows up in the Color Checker results as well, where many errors remain around 3–4 and individual ones exceed 7. So in SDR the result is very good, but in HDR we have to accept that the TV adds its own interpretation of brightness to the image.

Calibration brought a big improvement, especially in SDR material. We managed to even out the white balance and remove the previous color cast, and the Color Checker measurements now look really very good. Colors are much closer to what should be on the screen, so with regular TV or SDR movies we can be satisfied with the result. Unfortunately HDR somewhat spoils that outcome. On one hand it's limited by the panel's capabilities, since calibration won't improve contrast or replace local dimming. On the other hand there are color errors we couldn't correct because the CMS settings, that is color management, were grayed out and inactive. For that Philips loses points with us. White balance can be fine-tuned, but without access to wide color gamut controls you can't correct colors in HDR as effectively. It's a shame, because the SDR results show the potential is there, it's just not allowed to be fully used everywhere.

The handling of lower-quality material on the Hisense U7S is fairly mediocre. The Pentonic 700 chipset used here doesn't cope well with the effects of heavy compression. The menu includes a "Smooth & Gradient" picture option, but its performance leaves much to be desired. At the low setting it's hard to notice any improvement in tonal transitions, although at least the image isn't degraded. The medium and high settings still don't remove visible banding between shades and begin to smear details; in our test clips even parts of characters' faces disappeared. Interestingly, film grain remains untouched at every level. If you use this feature, we'd stick with the low setting. Its current behavior needs refinement, but that's mainly down to the processor used. Upscaling to 4K performs much better. Lower-resolution footage gains clarity, edges are well reconstructed, and fine elements look crisp. That doesn't mean it can recover details that weren't in the recording, but the TV makes good use of what it gets from the source. Another plus is that it doesn't crop the image edges, even with an SD signal.

The digital image processing in the Philips PQS9000 performs well, though we have a few reservations. The "Distortion Reduction" function helps smooth tonal transitions in lower-quality material, but it works quite unevenly. It can improve a section of the picture, only to, moments later and still within the same scene, seem to lose effectiveness and reintroduce banding between shades. A plus is that it doesn't remove film grain or fine noise, so the image retains its texture. We found the "Medium" setting worked best, and that's the one we recommend. The 4K upscaling itself is acceptable, though the picture is very soft. Edges are heavily smoothed, which may make the image feel less crisp to some viewers. In that case, it's worth slightly increasing the sharpness in the TV's menu, as this will make edges stand out more. Don't overdo the sharpness slider, however, or you may introduce artificial halos instead of improving the picture.

Motion handling on the Hisense U7S is pretty good thanks to the 144 Hz refresh rate. For movies we also have a motion smoothing feature that lets you adjust judder and blur reduction. You can therefore keep a more cinematic motion or increase smoothness if abrupt camera shifts bother you. In sports and games the high refresh rate is also useful, but unfortunately it doesn't solve this panel's biggest problem.

The culprit is pixel response time. Fast-moving objects leave long, noticeable trails, as our UFO test shows. It's worst on dark backgrounds, where the trail behind the object is especially pronounced. So motion can be smooth, but the moving object itself loses sharpness, and that difference on the U7S is fairly easy to notice.

In terms of motion handling, the Philips PQS9000 performs outstandingly for an LCD TV. It's not just the 144 Hz refresh rate, but above all how quickly the panel itself responds. At 120 Hz you can hardly see the typical trailing smears behind moving objects. What's especially pleasing is that this also applies to darker backgrounds, where many VA panels clearly struggle. Here motion remains clear, and Philips pleasantly surprised us in that regard. To adjust how motion is displayed there is the "Motion Style" function. It includes two sliders: "Smoothness" and "Blur Reduction," which let you tailor the effect to the content you're watching and your personal preferences. Our suggested settings are shown in the photo. Treat them as a starting point and try different levels of smoothing to see which you prefer.

The Hisense U7S has a lot to offer gamers. You get two HDMI 2.1 ports and support for 120 Hz at Full HD, 1440p, and 4K, so modern consoles’ capabilities are well used. When connected to a PC you can use 144 Hz at 4K or switch the resolution to Full HD and run 240 Hz. So there’s a wide choice, although it’s worth remembering the motion smearing mentioned earlier, which the high refresh rate does not eliminate. VRR and ALLM are also present. The first helps prevent tearing when frame rates in a game change. The second automatically switches the TV into game mode, so you don’t have to dig through the menu each time. VRR works from 48 to 240 Hz, with the highest refresh rate available in Full HD. Xbox users can also play in Dolby Vision, including at 120 Hz. Importantly, this format does not introduce significant input lag here. The Game Bar also looks very good. It’s easy to read, visually appealing, and lets you quickly check what signal the TV is receiving. There are also handy gaming settings at your fingertips, including shadow brightening. If it’s hard to spot an opponent in a dark game, you can improve visibility without digging through the entire menu.

Our biggest complaints concern HGiG. Hisense continues to do its own tone mapping, which makes setting HDR on the console confusing. You adjust a checkerboard test pattern and the TV continuously adapts how it looks. As a result, the moment the pattern disappears does not correctly indicate the screen’s brightness limit, and it’s easy to set the value too high. For this model it’s better to set the target HDR peak brightness on the console to about 900 to 1000 nits, rather than relying on the configurator.

Gaming features

When it comes to gaming features, the Philips PQS9000 really has a lot to offer. Four HDMI 2.1 ports let you connect multiple devices without having to decide which one gets the full-capability port. Consoles can use 120 Hz in Full HD, 1440p and 4K, and a PC can also take advantage of 144 Hz at 4K or 240 Hz if you drop down to Full HD. There's also VRR, which matches the refresh rate to the frame rate and prevents screen tearing. Its range goes from 48–240 Hz, with the upper limit applying to Full HD mode.

ALLM is included, so the TV automatically switches into game mode, and HGiG works correctly, which is useful when setting up HDR on a console. There's also a Game Bar for quick access to settings and signal information. The list even includes Dolby Vision gaming, but that option is hard to enjoy because of very high latency. Apart from that caveat, the feature set is really solid.