Hisense S7NQ CanvasTV vs LG OLED B6

When it comes to the brightness of the television and how it handles bright elements while watching movies, it is just average—similar to contrast. The average brightness level of the Hisense S7NQ is around 500 nits. This is a value that allows you to feel the beginnings of true HDR, but it is definitely too little to speak of outstanding effects. However, the television deserves praise for color gamut coverage—movies look very colorful and vibrant. With the use of PFS LED (QLED) coating, the device can cover over 90% of the DCI-P3 color gamut and over 72% of the wider BT.2020 gamut. For a television in this class, these are truly very good results.

The LG B6 is a moderately bright OLED. After calibration it reaches about 800 nits, roughly 200 nits more than last year’s B5. That’s thanks to the new budget OLED SE panel from LG Display. In practice it simply gives a bit more headroom and makes HDR in many scenes look fuller than on last year’s lower-tier OLEDs. That doesn’t mean the B6 has no limits. In very bright shots, when a large part of the screen is strongly lit, brightness can drop below 400 nits. This behavior is typical for OLED TVs (especially those from this segment) and that’s when you see the biggest difference versus more expensive models. All things considered, we rate the B6’s results as really solid. It’s still not a TV for breaking brightness records, but the HDR effect is strong enough that you can really feel the step up from ordinary SDR in films.

Color gamut

Using the OLED SE panel has slightly affected wide color gamut coverage. Compared with last year’s model, results fell by a few percentage points. DCI-P3 reaches about 96%, and BT.2020 around 71%. That doesn’t mean the colors on the LG B6 are weak. In most movies and series they look lively, well saturated and simply pleasing to the eye. You only notice a difference in very bright, highly colorful scenes. Then colors lose some intensity compared with QD-OLED panels. This comes from the WOLED panel construction. Besides red, green and blue subpixels it also uses a white subpixel that helps boost brightness. It comes at a cost: at very high luminance some color is effectively “diluted” by the white light, so saturation of some colors can be slightly lower. In everyday use this isn’t a big issue, but you can notice it in the most demanding scenes.

Let's now check how the Hisense S7NQ CanvasTV performs in color reproduction in the best factory mode, which is Filmmaker. Right from the start, it is evident that it is definitely better than in dynamic or standard mode, but there are still a few things to nitpick. In terms of image quality from the HD signal, the colors are slightly inaccurate – there is a dominance of cooler shades of blue and a lack of red. Because of this, the image appears somewhat too cool.

A similar effect occurs with 4K content, but it is more noticeable there. The excessive exposure of blue tones and the lack of red make the image seem distinctly cold. However, the biggest issue with this television is not the colors themselves but rather the way brightness is managed. The tested unit slightly boosted the brightness compared to the reference value. The result is indeed better visibility of details, but at the cost of significantly brightened black – which makes the entire image seem more "flat."

A similar phenomenon was noticed in the 4K signal – the slightly inflated curve at the beginning of the EOTF graph shows that the television has a tendency to excessively expose certain scenes. Fortunately, this effect can be improved with professional calibration, which we will discuss in the next point.

We tested the LG B6 in Filmmaker Mode, which is the best picture setting available right out of the box. ISF modes deliver very similar results, but in our tests we always stick to Filmmaker Mode for better comparison with other TVs. Each of those modes is, after all, a much better starting point than Vivid or Eco mode, where the picture is heavily boosted and noticeably less natural. With SDR content, the factory settings perform really well. Color errors are small, gamma behaves properly, and the image looks natural during ordinary viewing and does not seem overly "pumped up." It's a bit worse with HDR. When you play that kind of content you can quickly see that the white balance hasn't been set perfectly. Too much blue and red causes the image to shift toward a slightly pink tint. This is also confirmed by measurements of the color gamut and the ColorChecker, where samples clearly drift in that direction. It's not a flaw that completely ruins the picture, but you can notice it in HDR films. So people who care about the most faithful image should consider the calibration we describe later in the review.

The results we achieved after calibrating the Hisense S7NQ are really very good. Thanks to the calibration, we were able to eliminate the excessive exposure of blue tones and the lack of red in the HD signal. A similar, although slightly weaker effect was also achieved with 4K HDR content. Brightness management in HD material has also improved – the television no longer has problems with overall image brightness issues.

However, there are things that cannot be overlooked. The characteristic of the EOTF curve has practically not changed, and the lack of local dimming means that the smallest elements on the screen will always be slightly overexposed. One simply has to accept this when choosing a television with a similar type of backlighting. Nonetheless, the final result is very good and should fully satisfy the vast majority of users.

During calibration we focused primarily on HDR content, because that's where the factory settings required the biggest corrections. We didn't neglect SDR mode, though, which after adjustment was brought almost to perfection. Colors are very accurate and brightness is handled as it should be. The biggest improvement in HDR came from correcting the white balance. After removing the excess red and blue, the pinkish tint disappeared and the image became much more natural. Skin tones, whites and all colors that had been shifting toward magenta improved. After calibration most errors fell below a Delta E of 2–3, the threshold at which the average viewer stops noticing differences with the naked eye. The LG B6 can therefore deliver a very accurate image, especially for the manufacturer's entry-level OLED model.

It is equally important how the television handles tonal transitions on a poorer signal – for example, in older movies, television, or on YouTube. Unfortunately, despite the presence of the "Smooth and Gradient Picture" feature, which was supposedly intended to improve this aspect, its performance is truly lacking. It is barely noticeable that it has any real impact on the visibility of color transitions.

Image scaling also performs poorly. Yes, one can observe that the television tries to "stretch" the quality, but the final effect is far from ideal. The image often appears slightly jagged, which is especially noticeable in the case of tree branches in the background. Additionally, the Hisense S7NQ has a clear tendency to crop the image at lower resolutions, which can cause us to miss captions in the news or finer details of the image.

The LG B6 handles lower-quality sources very well. Much of the credit goes to effective digital image processing, which can mask some source imperfections without overly smoothing the whole scene. The feature "Smooth Gradation" proves particularly useful. It can significantly reduce posterization, which we mentioned earlier, especially in darker areas of the image. The safest choice remains Low or Medium. The function still effectively smooths harsh tonal transitions, but does not yet interfere too much with fine details. The most dedicated purists can, of course, leave it off. Upscaling to 4K also performs very well. Full HD and 720p content retain a good amount of detail, and the image is neither overly sharpened nor excessively blurred. Some limitations become noticeable only with very poor sources below 720p, where the smallest subtitles and fine elements are not always perfectly sharp, but this is true for almost every other TV on the market.

When it comes to motion fluidity, the television performs really well. Although the S7NQ was mainly designed for displaying static elements – such as images – the manufacturer has utilized a panel with a refresh rate of 144 Hz. As a result, sports or games look really good on it.

For materials that are not recorded at a high frame rate, the manufacturer provided two features that allow you to adjust the picture to your own preferences. "Motion blur reduction" and "motion smoothing" operate on a 10-level scale, allowing you to choose between a more cinematic image – with characteristic frame jumps – and a smooth effect reminiscent of a "soap opera." How to set this up? That's a personal matter – we leave the decision to you.

One of the biggest advantages of OLED panels is their very fast pixel response time. This keeps the image sharp and prevents the visible smearing that often appears on LCD TVs. However, there is a downside. During slow camera pans, motion can look more choppy than on LCD screens, where the slower panel naturally masks some of that effect. Fortunately, on the LG B6 you can easily soften this with TruMotion. With the motion smoothing properly adjusted, you can achieve smoother motion without giving the picture an excessive soap-opera effect.

Even though the S7NQ is an "image" type TV, you can actually play games on it. Really. It has almost everything (except for HGiG mode) that a modern gaming TV needs. The 144 Hz panel and two full-fledged HDMI 2.1 ports allow for seamless connection of two consoles, such as PlayStation 5 or Xbox Series X/S.

The TV supports automatic game mode (ALLM) and frame synchronization (VRR) without any stuttering or issues. It also handles high frame rates at lower resolutions without a hitch. We must commend Hisense for the very attractive Game Bar – it displays all available picture options, and additionally, we have the ability to zoom in on the mini-map or enable a crosshair (because sometimes someone might actually want to "aim" 😉).

The only missing element – as we mentioned earlier – is the lack of a proper implementation of HGiG mode. It is responsible for automatically setting the picture in games as the creators intended. It's a shame because that’s the only thing separating the Hisense S7NQ from being a full-fledged gaming "monster."

LG OLED B6 offers a powerful set of advantages for gamers; it's simply a complete platform for PS5, Xbox Series X/S, or a solid PC. It has four full-size HDMI 2.1 ports with 48 Gbps bandwidth, so you can skip the annoying cable swapping when you want to connect several newer devices at once. We get the full suite of sync technologies – from classic VRR to G-Sync and FreeSync. The screen seamlessly matches the refresh rate to the frame output produced by the console or graphics card. Of course ALLM is included: the B6 automatically detects a running game and immediately cuts input lag to a minimum. HDR handling is also excellent. The TV supports Dolby Vision, and a properly implemented HGiG standard means that after an initial calibration in the console settings the picture won’t suffer from blown-out highlights or lost detail in bright areas. The cherry on top is the Game Bar. Instead of digging through the full menu during gameplay, one click lets you adjust shadow visibility, tweak selected settings, or simply check the display’s current operating mode. All of this makes the LG B6 a great choice for gamers.