Hisense A7NQ vs Hisense U7S / U77SE

We checked how the Hisense A7NQ performs with HDR, and there are no surprises here. The luminance chart showed a maximum brightness of 370 nits. The result? Exactly what one could expect – average. At a brightness of around 350 nits, HDR does not stand out particularly compared to SDR. A subtle difference can be seen in more brightly lit scenes, but it’s not a jaw-dropping effect. As for the coverage of the wide colour gamut, the result was 92% for DCI-P3 and 70.2% for BT.2020. These are decent values for a TV in this class that uses a PFS coating – the same one that is sometimes promoted as QLED. The colours look good, but let’s not expect anything that competes with the best screens on the market. HDR on the Hisense A7NQ is more of an addition than a "game changer." For those looking for solid picture quality on a moderate budget – absolutely acceptable. However, if we expect full HDR capabilities, it is worth looking at higher-end models.

The Hisense U7S has considerable HDR potential, but it can't use it in every scene. On a test pattern it reaches around 1,100 nits, so the backlight itself is very strong. In our brighter film scenes we measured about 640 to 745 nits. That's still enough for the sun or bright highlights to have a noticeable glow and to show an advantage over SDR material. When the TV needs to illuminate a larger portion of the image, it does quite well.

The problem appears with small lights on a dark background. Each of the 192 zones covers an area much larger than a tiny point on the screen. If the TV were to strongly light such a zone, it would also brighten the surrounding area along with the light. Hisense tries to avoid that and dims the entire zone. Black levels therefore look better, but a small bright object that should draw the eye also loses intensity. That's why in two tougher scenes we recorded only 297 and 154 nits. The difference is large: in one shot HDR can impress, and in the next small lights are noticeably muted. The U7S therefore prioritizes maintaining deep blacks, even at the expense of bright details. With this number of zones that's an understandable compromise, but it's worth remembering — the 1,100-nit peak tells us about the backlight's capability, not how brightly the TV will render every element of a film.

Colors

Hisense calls the U7S ULED, but that's a marketing name; the wider color gamut here comes from a PFS phosphor backlight. In our measurements the TV covered about 91% of DCI-P3 and 71% of BT.2020. Those are good results, although it falls short of the best screens on the market. The biggest shortfall is in green — the TV doesn't even reach the DCI-P3 target there, so the most saturated shades will be less intense than they should be. Most colors in HDR films and series, however, still look suitably rich. A positive is the repeatability of the results. Gamut coverage on test patterns and in film scenes is practically identical.

When testing the Hisense A7NQ in Filmmaker mode, we hoped for compliance with the manufacturer's assumptions, but unfortunately, the reality looks different. The main issue, as with most TVs, is the white balance. In the case of the A7NQ, we noticed a clear dominance of blue, which affected both lower-quality materials and 4K HDR content. The Color Checker test results confirm this, and the comparison images speak for themselves – the main actress appears cool and pale in "factory" mode. It looks as if she has been stripped of life.

Regarding brightness characteristics, both gamma and the EOTF curve show that the image is excessively bright. As a result, everything seems flat, lacking depth and contrast. This state of affairs definitely does not work in favour of the A7NQ and makes the viewing experience in factory mode leave much to be desired. If we expect natural colour reproduction and appropriate image depth, the A7NQ in Filmmaker mode is unlikely to impress us. It is a TV that requires significant adjustment to extract its potential.

The out-of-the-box colors on the Hisense U7S are decent, but there are a few things to improve. In SDR there's a red bias in the white balance, which makes the image too warm and in places slightly pink. You can notice this on faces and on bright, neutral surfaces. Gamma also runs below the reference, so the TV brightens the image, especially in darker areas. That makes shadow details easier to see, but the scene loses some of its depth.

In HDR the white balance is a bit more even, but not completely neutral; midtones lack blue, and the brightest areas lack red. A bigger problem is how brightness is reproduced. The EOTF curve shows that a large portion of midtones is being brightened, so the image looks brighter than the source material intends. Color Checker measurements also perform worse than in SDR: many errors are around 3 to 4, and individual ones reach as high as 8. Colors can therefore look attractive, but they are not always faithful to what we should be seeing. There's room for improvement, and we'll check how much can be corrected with calibration.

The Hisense A7NQ offers several tools that allow you to improve image quality, so we decided to take matters into our own hands and "dig around" in the settings a bit. Thanks to professional tools and measurements, we managed to correct the white balance, eliminating the excessive dominance of blue colour in both HD and 4K materials. This is a significant step forward, as in the Color Checker test, colour reproduction errors in lower-quality content dropped to a much more acceptable level. Unfortunately, 4K materials are still far from ideal – colour distortions are considerable and stem from the limitations of the television.

As for gamma, we managed to significantly reduce the excessive brightness of the image set after setting it to the correct level. However, the issue with brightness characteristics in 4K content remains unresolved – the EOTF curve still shows excessive illumination of the entire screen. It is possible that a proper implementation of dynamic tone mapping could help here, but as we mentioned earlier, this feature on the Hisense A7NQ works rather poorly instead of being helpful. Nevertheless, calibration significantly improved the overall image perception. The director's vision is now much better conveyed than in the factory settings, which more demanding viewers will certainly appreciate.

Calibration of the Hisense U7S helped most with SDR content. We managed to even out the white balance, so the previous warm cast is gone and whites and grays look neutral. Gamma is also now very close to the reference, and the TV no longer brightens the image unnecessarily, so darker scenes have regained depth. Color Checker measurements confirm the improvement: most errors fall below 2. That yields a really well-calibrated picture for regular TV and SDR movies. It didn't go as smoothly in HDR. The TV lacks an effective way to correct the EOTF curve, so Hisense still interprets the content's brightness a bit on its own. It brightens parts of the image and can dim the brightest elements depending on the scene and the local dimming behavior. Calibration couldn't eliminate this. It shows up in the Color Checker results as well, where many errors remain around 3–4 and individual ones exceed 7. So in SDR the result is very good, but in HDR we have to accept that the TV adds its own interpretation of brightness to the image.

The Hisense A7NQ impresses with smooth tonal transitions in 4K materials, but unfortunately, there is no feature here that would improve this aspect in older materials of lower quality. In such cases, colour merging becomes more visible, which can somewhat spoil the viewing experience, especially in scenes with a lot of gradients.

When it comes to upscaling, the TV performs surprisingly well. The image is clearly improved, although it does come with some compromises. One can notice that the TV adds a bit of artificial sharpness, and elements in the background, such as branches, tend to exhibit slight "jagginess." These are details, however, that will mainly catch the eye of those who pay attention to such nuances.

The handling of lower-quality material on the Hisense U7S is fairly mediocre. The Pentonic 700 chipset used here doesn't cope well with the effects of heavy compression. The menu includes a "Smooth & Gradient" picture option, but its performance leaves much to be desired. At the low setting it's hard to notice any improvement in tonal transitions, although at least the image isn't degraded. The medium and high settings still don't remove visible banding between shades and begin to smear details; in our test clips even parts of characters' faces disappeared. Interestingly, film grain remains untouched at every level. If you use this feature, we'd stick with the low setting. Its current behavior needs refinement, but that's mainly down to the processor used. Upscaling to 4K performs much better. Lower-resolution footage gains clarity, edges are well reconstructed, and fine elements look crisp. That doesn't mean it can recover details that weren't in the recording, but the TV makes good use of what it gets from the source. Another plus is that it doesn't crop the image edges, even with an SD signal.

The Hisense A7NQ is equipped with a 60 Hz matrix, meaning dynamic scenes – for example, in sports or games – are somewhat average here. This is standard for this level of TV, but it must be admitted that watching more intense, fast-moving content can leave a lot to be desired. However, when it comes to movies, the TV offers a motion smoothing feature that operates on a 10-level scale. The "motion blur reduction" option allows you to adjust the fluidity of the image to your own preferences. At the lowest setting, you get a natural film frame rate, which will please cinema purists. On the other hand, the maximum setting provides a very smooth, theatrical image that may appeal to those who prefer a more "smoothed out" motion.

Motion handling on the Hisense U7S is pretty good thanks to the 144 Hz refresh rate. For movies we also have a motion smoothing feature that lets you adjust judder and blur reduction. You can therefore keep a more cinematic motion or increase smoothness if abrupt camera shifts bother you. In sports and games the high refresh rate is also useful, but unfortunately it doesn't solve this panel's biggest problem.

The culprit is pixel response time. Fast-moving objects leave long, noticeable trails, as our UFO test shows. It's worst on dark backgrounds, where the trail behind the object is especially pronounced. So motion can be smooth, but the moving object itself loses sharpness, and that difference on the U7S is fairly easy to notice.

Hisense A7NQ is a device that can pleasantly surprise gamers, although it is not without its faults. The fact that we have a 60 Hz panel immediately suggests that the TV is not designed for the most demanding gaming scenarios. The motion blur we described earlier can also be a hindrance, especially in dynamic games.

However, there are several things worth praising. The TV supports ALLM (Auto Low Latency Mode) and VRR (Variable Refresh Rate), which are not always standard in this price range. The biggest surprise, however, is that the A7NQ can display images at 120 Hz – although only in Full HD resolution, it is still a significant nod to gamers. This allows a choice between smoothness and resolution, which is not obvious in TVs at this price point.

A nice addition is the Game Bar, which is clear and practical – all the main features are at hand without digging through the settings. However, there is a lack of support for HGiG, which may be disappointing for gamers looking for perfect HDR in games.

The Hisense U7S has a lot to offer gamers. You get two HDMI 2.1 ports and support for 120 Hz at Full HD, 1440p, and 4K, so modern consoles’ capabilities are well used. When connected to a PC you can use 144 Hz at 4K or switch the resolution to Full HD and run 240 Hz. So there’s a wide choice, although it’s worth remembering the motion smearing mentioned earlier, which the high refresh rate does not eliminate. VRR and ALLM are also present. The first helps prevent tearing when frame rates in a game change. The second automatically switches the TV into game mode, so you don’t have to dig through the menu each time. VRR works from 48 to 240 Hz, with the highest refresh rate available in Full HD. Xbox users can also play in Dolby Vision, including at 120 Hz. Importantly, this format does not introduce significant input lag here. The Game Bar also looks very good. It’s easy to read, visually appealing, and lets you quickly check what signal the TV is receiving. There are also handy gaming settings at your fingertips, including shadow brightening. If it’s hard to spot an opponent in a dark game, you can improve visibility without digging through the entire menu.

Our biggest complaints concern HGiG. Hisense continues to do its own tone mapping, which makes setting HDR on the console confusing. You adjust a checkerboard test pattern and the TV continuously adapts how it looks. As a result, the moment the pattern disappears does not correctly indicate the screen’s brightness limit, and it’s easy to set the value too high. For this model it’s better to set the target HDR peak brightness on the console to about 900 to 1000 nits, rather than relying on the configurator.