Dreame S100 vs LG OLED B6

The Dreame S100 is a relatively bright television. In movie mode, the brightness we measured reached about 600 nits. This is a really good result, although not the highest, considering the capabilities of the competition in this price range. In fullscreen scenes, it is evident that the television can generate an image that strikes with brightness. Unfortunately, when more complex scenes appeared on the screen, the local dimming algorithm in this model tried above all to maintain the deepest blacks. However, this came at the expense of HDR effect – and in a drastic way. In such scenes, the brightness of bright elements dropped below 100 nits, which is a truly tragic result, far from any HDR effect. This aspect can be improved, though not without any "buts." It is enough to change the local dimming setting in the television's menu, but then the blacks in such scenes simply turn gray. It’s a pity that Dreame could not refine the local dimming algorithms better, and the S100 is another example that the mere number of local dimming zones does not always translate into better image quality. As a consolation, it is worth adding that the Dreame S100 is advertised as a "QLED" television, although in reality it utilizes a PFS LED filter. As a result, the colors are appropriately saturated, and the color gamut coverage we measured exceeded 94% of the DCI-P3 palette.

The LG B6 is a moderately bright OLED. After calibration it reaches about 800 nits, roughly 200 nits more than last year’s B5. That’s thanks to the new budget OLED SE panel from LG Display. In practice it simply gives a bit more headroom and makes HDR in many scenes look fuller than on last year’s lower-tier OLEDs. That doesn’t mean the B6 has no limits. In very bright shots, when a large part of the screen is strongly lit, brightness can drop below 400 nits. This behavior is typical for OLED TVs (especially those from this segment) and that’s when you see the biggest difference versus more expensive models. All things considered, we rate the B6’s results as really solid. It’s still not a TV for breaking brightness records, but the HDR effect is strong enough that you can really feel the step up from ordinary SDR in films.

Color gamut

Using the OLED SE panel has slightly affected wide color gamut coverage. Compared with last year’s model, results fell by a few percentage points. DCI-P3 reaches about 96%, and BT.2020 around 71%. That doesn’t mean the colors on the LG B6 are weak. In most movies and series they look lively, well saturated and simply pleasing to the eye. You only notice a difference in very bright, highly colorful scenes. Then colors lose some intensity compared with QD-OLED panels. This comes from the WOLED panel construction. Besides red, green and blue subpixels it also uses a white subpixel that helps boost brightness. It comes at a cost: at very high luminance some color is effectively “diluted” by the white light, so saturation of some colors can be slightly lower. In everyday use this isn’t a big issue, but you can notice it in the most demanding scenes.

We tested the Dreame S100 in "movie" mode and definitely recommend using this setting for watching all kinds of content. Interestingly, in the deeper settings of the TV, we also find a dedicated "Filmmaker" mode, which is available today from almost every manufacturer. However, in the case of the Dreame S100, we do not recommend using it – it blocks all image-related settings and does not allow any configuration in the menu - not even motion smoothing. So how do the factory colors perform on the S100? Not too bad, but also not great. The TV itself was quite heavily tinted with blue components, which is clearly visible in our white balance measurements. This caused the image to be artificially brightened, and the colors had a slight bluish tint. This is confirmed by the Color Checker palette, which showed how color samples leaned towards blue, generating quite significant color errors. The image in HDR mode looked definitely better, where color errors were not as prominently visible, though they still fell far from ideal. Here, the white balance was also too heavily skewed towards the blue color, which caused quite significant errors in color reproduction.

We tested the LG B6 in Filmmaker Mode, which is the best picture setting available right out of the box. ISF modes deliver very similar results, but in our tests we always stick to Filmmaker Mode for better comparison with other TVs. Each of those modes is, after all, a much better starting point than Vivid or Eco mode, where the picture is heavily boosted and noticeably less natural. With SDR content, the factory settings perform really well. Color errors are small, gamma behaves properly, and the image looks natural during ordinary viewing and does not seem overly "pumped up." It's a bit worse with HDR. When you play that kind of content you can quickly see that the white balance hasn't been set perfectly. Too much blue and red causes the image to shift toward a slightly pink tint. This is also confirmed by measurements of the color gamut and the ColorChecker, where samples clearly drift in that direction. It's not a flaw that completely ruins the picture, but you can notice it in HDR films. So people who care about the most faithful image should consider the calibration we describe later in the review.

The Dreame S100 turned out to be a device very susceptible to professional calibration. In its menu, we found a whole array of advanced options that allowed us to effectively correct factory errors. Thanks to advanced white balance correction – both in SDR and HDR content – we completely eliminated excess blue components. The image immediately became much more natural and pleasant to view. After fully tuning the colors, errors in the Color Checker test dropped below Delta E values of 2-3. For the average viewer, this means that any color distortions have become nearly impossible to notice with the naked eye. This is a really nice surprise, as often new brands in the television market have significant problems with proper implementation and functioning of sliders in the calibration menu. Here, everything worked as it should. The only thing we need to criticize is the way the television manages its brightness in HDR. Due to the specific nature of the local dimming algorithms, we observed anomalies in the EOTF curve we measured. In the areas where high highlights should appear, there is a slight uplift of the curve above the reference line. In practice, this results in unnatural brightening of some of the brightest elements in movies or games. Despite this minor flaw, professional calibration brings a huge, very positive change to this model.

During calibration we focused primarily on HDR content, because that's where the factory settings required the biggest corrections. We didn't neglect SDR mode, though, which after adjustment was brought almost to perfection. Colors are very accurate and brightness is handled as it should be. The biggest improvement in HDR came from correcting the white balance. After removing the excess red and blue, the pinkish tint disappeared and the image became much more natural. Skin tones, whites and all colors that had been shifting toward magenta improved. After calibration most errors fell below a Delta E of 2–3, the threshold at which the average viewer stops noticing differences with the naked eye. The LG B6 can therefore deliver a very accurate image, especially for the manufacturer's entry-level OLED model.

The scaling and digital processing in the Dreame S100 is handled by a technology that the manufacturer proudly calls Dreamind™ Pro AI. However, it is essential to clarify that this is not a proprietary processor but merely a marketing name for a chip from MediaTek – specifically, the model MT5889. Unfortunately, we are talking about quite an outdated unit, from the time when MediaTek lagged significantly behind the competition in terms of performance. This, unfortunately, has a direct impact on the image, as this chip is responsible for that as well. The upscaling in the S100 is rather mediocre, and the processor tends to strongly and artificially sharpen edges (fortunately, this can be somewhat tempered with the sharpness slider in the menu). In the options, we also find a "Contour Smoothing" function, which theoretically is supposed to improve tonal transitions. In practice, it brings almost no improvement – setting it to any level rarely eliminates visible color banding but can unnecessarily blur elements of the image that should remain sharp.

A separate problem is the phenomenon of overscan (clipping the edges of the frame), which is almost always visible here. Although there is an option to set the screen to display the full frame in low-resolution materials, it requires activating the aforementioned Filmmaker mode. And as you already know, this mode completely blocks any other adjustments in the image menu. In our test tables, we noted that the television offers the option to disable overscan, as technically such a feature exists in the system – however, in everyday use, with reasonable image settings, you will not be able to take advantage of it.

The LG B6 handles lower-quality sources very well. Much of the credit goes to effective digital image processing, which can mask some source imperfections without overly smoothing the whole scene. The feature "Smooth Gradation" proves particularly useful. It can significantly reduce posterization, which we mentioned earlier, especially in darker areas of the image. The safest choice remains Low or Medium. The function still effectively smooths harsh tonal transitions, but does not yet interfere too much with fine details. The most dedicated purists can, of course, leave it off. Upscaling to 4K also performs very well. Full HD and 720p content retain a good amount of detail, and the image is neither overly sharpened nor excessively blurred. Some limitations become noticeable only with very poor sources below 720p, where the smallest subtitles and fine elements are not always perfectly sharp, but this is true for almost every other TV on the market.

When it comes to motion fluidity, the Dreame S100 performs really well. It features a panel with a 144 Hz refresh rate, although in reality, the vast majority of users using it in a traditional way will still be limited to 120 Hz (because today's equipment, apart from PCs, only allows for such values). Thanks to the high refresh rate, the image in motion remains really sharp, largely due to the well-functioning MEMC fluidity enhancer. In the menu, we find predefined modes that allow the TV to efficiently add artificial frames, which effectively improves the fluidity of dynamic sports shots, but also helps get rid of image stuttering in film and series materials recorded at 24 frames.

One of the biggest advantages of OLED panels is their very fast pixel response time. This keeps the image sharp and prevents the visible smearing that often appears on LCD TVs. However, there is a downside. During slow camera pans, motion can look more choppy than on LCD screens, where the slower panel naturally masks some of that effect. Fortunately, on the LG B6 you can easily soften this with TruMotion. With the motion smoothing properly adjusted, you can achieve smoother motion without giving the picture an excessive soap-opera effect.

The Dreame S100 seems almost like the perfect screen for gamers. The TV is equipped with 2 HDMI 2.1 ports with a bandwidth of 40 Gbps, which means that features such as Auto Low Latency Mode (ALLM) and Variable Refresh Rate (VRR) synchronization in the range of 48-144 Hz work seamlessly on consoles. It also has a well-designed game panel (Game Bar) that allows you to continuously check the most important parameters – from active picture modes to the number of frames rendered by the console, and even the ability to add a crosshair in the center of the screen. All of this looks great on paper, but the biggest issue with the S100 is the implementation of HDR mode in games. The TV does not have a properly implemented HGiG format. As a result, an unsuspecting user may incorrectly configure the console during the initial setup of the display. A wrong configuration can lead to a picture that is too dark or too bright (as a guideline: we suggest setting the brightness in the Xbox console menu to about 600 nits, and in the PS5 to 12 clicks). The Dolby Vision format is also problematic; it often just would not activate at all when using the XBOX – Dreame S100 line. And when it was managed to be activated, gaming was impossible due to a very high input lag that often exceeded 100ms. If the manufacturer can improve the HDR issue in games through an update, the S100 will be truly excellent equipment for gamers. For now, however, one must reckon with compromises.

LG OLED B6 offers a powerful set of advantages for gamers; it's simply a complete platform for PS5, Xbox Series X/S, or a solid PC. It has four full-size HDMI 2.1 ports with 48 Gbps bandwidth, so you can skip the annoying cable swapping when you want to connect several newer devices at once. We get the full suite of sync technologies – from classic VRR to G-Sync and FreeSync. The screen seamlessly matches the refresh rate to the frame output produced by the console or graphics card. Of course ALLM is included: the B6 automatically detects a running game and immediately cuts input lag to a minimum. HDR handling is also excellent. The TV supports Dolby Vision, and a properly implemented HGiG standard means that after an initial calibration in the console settings the picture won’t suffer from blown-out highlights or lost detail in bright areas. The cherry on top is the Game Bar. Instead of digging through the full menu during gameplay, one click lets you adjust shadow visibility, tweak selected settings, or simply check the display’s current operating mode. All of this makes the LG B6 a great choice for gamers.