Blaupunkt UGC5500S vs PHILIPS PUS9010 (IPS)

Here, we won't beat around the bush either – if you're looking for a TV strictly for cinematic HDR experiences, you've come to the wrong address. The Blaupunkt UGC5500S unfortunately is not a machine designed for such challenges. This is primarily due to its very low brightness, which we measured during our tests. A result of around 250 nits on film screens speaks for itself. It's simply too little to even talk about any real HDR effect. To be honest, everything displayed here in this format can best be considered a slightly "boosted" SDR mode. We expected this because practically every device in this price range fails in this regard, but we feel obligated to warn you. Manufacturers love to boast about HDR compatibility stickers on the boxes, but in reality, this format simply doesn't exist here – it lacks the "fuel" of brightness.

The situation is made all the more difficult for Blaupunkt because we have a panel with a very basic DCI-P3 color gamut coverage of just around 80%. You won't find any advanced coatings that enhance these capabilities (like quantum dots), making scenes that are supposed to burst with richly saturated colors appear simply desaturated on this screen. Therefore, we have a concrete piece of advice for you: do not push the HDR mode on this model. If you have the option in the streaming app settings – just turn it off. Sticking with the classic SDR mode will ensure that the TV won't try to "enhance" something that it can't handle hardware-wise.

In the Philips PUS9010 version with an IPS panel, HDR brightness unfortunately falls short compared to the previously tested 55-inch variant with a VA panel. The difference is about 100 nits, which is clearly noticeable given the relatively low values. While the VA version could exceed 500 nits, here the maximum brightness reaches around 400 nits. This level still allows for watching movies and series in HDR, especially on streaming platforms, but the effects are clearly more subdued. Bright elements do not have as much impact, and scenes requiring high luminance appear less impressive. On the positive side, the coverage of the DCI-P3 color palette is commendable. The IPS version offers about 91%, which is roughly 5% more than the variant with the VA panel. This translates to slightly better color saturation in HDR content, despite the lower brightness. Colors can appear more vivid and consistent, particularly in colorful scenes.

We also took a close look at how Blaupunkt handles colors in movie mode, and here the situation is, to put it briefly, twofold. We must clearly separate what we see in the standard SDR format from what happens when HDR is turned on, as these are two completely different worlds. Let’s start with the better side of the coin. If you plan to watch classic television, YouTube, or older movies on this TV, you can count on really well-tuned colors. In our test sample, the white balance in movie mode was exceptionally accurate, which honestly surprised us. Of course, to not make it too rosy, we noticed some flaws. Looking at the gamma charts, we observed that the processor struggles with properly dimming the image in its brightest parts. Additionally, there is quite strong, at times too aggressive, red saturation, which resulted in noticeable errors in reproducing certain shades. Nevertheless, in general terms, the image in SDR is simply solid and watchable without a grimace on your face. Unfortunately, the magic fades when we re-enter the world of HDR. Here, Blaupunkt behaves as if we suddenly switched it to store mode, and in its worst form. The excess blue in the white balance is so overwhelming that it literally clashes with the eyes, ruining any realism of the scene. Furthermore, the TV interprets brightness very loosely, which, when analyzing the EOTF curve, clearly showed that for most of the time the colors appear simply washed out and lacking depth. This is, by the way, perfectly visible in the color errors that become evident in this mode. Once again, we are left with the same conclusion: Blaupunkt in SDR mode looks significantly better and more natural than in HDR, which feels forced and not properly refined.

We assessed color reproduction, as always, using factory settings, focusing on movie mode, which in the case of Philips usually offers the best starting point. This is also a good moment to show how much the same TV model can vary depending on the panel used. Looking at white balance, the overall trend remains similar to the variant with a VA panel. There is still excessive red in the whites, but in the tested unit with an IPS panel, there are also deficiencies in the blue channel. As a result, the image has a slightly different color character, which can be clearly seen in the comparative materials. This is a very good example showing why ready-made settings downloaded from the internet may not always work even within the same model.

However, returning to the assessment itself, this unit performs quite well, especially in SDR content. Color tests show correct saturation and color consistency, without glaring errors that could interfere with everyday viewing. In HDR materials, slight deficiencies in reds are already noticeable, but these are not flaws that completely ruin the perception of the image. The biggest limitations do not stem directly from the colors but rather from whites and blacks. The use of an IPS panel and slightly lowered gamma results in the image being slightly boosted in brightness, while the weak black further affects perceived contrast. This makes the overall look brighter, but at the same time, it loses depth, especially during evening viewing.

It may sound like a joke – pulling out professional measurement equipment for a television costing around a thousand zlotys / 250 dollars – but we wouldn't be ourselves if we didn't check it out. The question is: does such cheap equipment give us any room for calibration? To your surprise, the answer is yes, and absolutely so. In the Blaupunkt UGC5500S menu, we found surprisingly many options that allowed us to really work on the picture. These are not just empty sliders; they are concrete tools that enabled us to make use of our measurement sensors and software. In SDR mode, the effects were noticeable to the naked eye. We successfully eliminated the issue we mentioned earlier – that excessive, almost artificial saturation of reds. We also fixed the problem of incorrect dimming of the brightest parts of the image. After calibration, the standard format picture became much more balanced and simply correct. As for HDR, the situation was again more complicated. Although we managed to "tame" that aggressive blue tint in the white balance, it was evident that we were fighting a bit in vain. Even after changing the settings, the television still tried to intervene in the image in its own way, as if the electronics knew better than we did how the scene should look. Additionally, there's a hardware barrier that no slider can overcome – colors in HDR still remain unsaturated. This simply results from the quality of the panel itself; it physically cannot produce the most vibrant colors. To summarize this point: if any of you ask whether it’s possible to calibrate a television for "a thousand," we respond with full conviction: it is possible.

After calibration, the image was brought to a really reasonable level. Everything looks coherent and natural, and when it comes to color reproduction, it's hard to definitively state whether we have a VA or IPS panel. This is a good sign, showing that the TV has a solid foundation for further adjustments. It's worth noting the larger color gamut coverage in this variant, which can slightly improve the reception of colorful scenes, especially in HDR content. However, this advantage is largely counterbalanced by the elevated blacks, resulting from the use of an IPS panel. Limited black depth affects perceived contrast, especially when watching in a dark room. As a result, despite the noticeable improvement after calibration, the final assessment remains the same as in the variant with a VA panel. Better colors are not able to fully compensate for the weaker blacks.

If you expect that the processor in this model will magically "fix" the poor quality signal from cable TV or old films from YouTube, we must disappoint you. The capabilities of this television end with absolutely basic upscaling, which is simply stretching the image to a higher resolution. It does this correctly in that the image is not blurry, but there is no talk of any intelligent sharpening or adding details. Worse still, Blaupunkt is completely devoid of any functions that reduce unwanted tonal transitions. If the material being viewed has so-called banding (ugly "steps" instead of a smooth transition of colors, e.g., in the sky), this television will display them in all their glory. Additionally, the television tends to slightly crop the edges of the image. Instead of displaying 100% of what the source sends, Blaupunkt slightly enlarges the frame, causing us to lose details located at the very edges of the screen. In summary: in the category of digital "enhancement" of the image, Blaupunkt simply performs poorly. We receive a raw, unprocessed signal with all its flaws.

In the Philips PUS9010, we find another iteration of the P5 Perfect Picture image processor, which aims to improve the quality of weaker materials. One of the components of this system is the distortion reduction function, responsible for smoothing tonal transitions. It works effectively and actually reduces visible color gradation. Unfortunately, it does so rather aggressively. In practice, it can dull details such as material textures or film grain. This is a clear compromise, so we wouldn't recommend it for movie screenings. It performs much better with looser content, like YouTube or regular television. The P5 processor also handles lower resolution materials quite well. The image is soft, sometimes even too soft, but it can easily be adjusted with the sharpness slider, tailoring the effect to personal preferences. Additionally, the lack of edge cropping in SD materials is a plus, which is still not standard in this class of televisions.

When it comes to motion fluidity, Blaupunkt has nothing to defend itself with. A 60 Hz panel at this price is standard, so none of us expected a perfectly sharp image during fast action scenes or while watching a game. However, the biggest drawback of this model is that you won't find any digital smoothers in the menu. The manufacturer did not give us any room to maneuver – there's no way to smooth anything out or adjust the image to our preferences. The image is always "raw" and we receive it exactly as the source transmits it. For fans of cinematic "motion jump," this might be fine, but everyone else just has to get used to the absence of any motion support.

Philips PUS9010 has a 4K panel with a refresh rate of 144 Hz, which will be appreciated primarily by sports fans and gamers. This is especially evident in dynamic scenes where motion is sharp, and annoying trailing is nearly absent. When it comes to movies (standard 24 fps), Philips provides us with a proven set of settings known from higher series. Two sliders are used to control motion. The “Smoothness” slider allows you to adjust the image to your taste: at low settings, we maintain a cinematic character, while moving the slider to the right gives us a perfectly smooth, albeit slightly “theatrical” effect. On the other hand, the “Motion Blur Reduction” is a feature made for sports – it ensures that fast objects do not lose details and remain clear.

When it comes to gaming on the Blaupunkt, we didn’t expect miracles and indeed – the list of features is not very long. However, there are two interesting points worth mentioning, as they may be significant for some of you at this price. The first advantage is that the TV quite efficiently detects the connected console. Thanks to the ALLM (Auto Low Latency Mode) feature, the device automatically knows when you start gaming and switches to low latency mode. This is convenient because you don’t have to fiddle with the settings every time to prevent input lag from ruining the fun. The second point is a real curiosity that surprised us. Even though it’s a 60 Hz panel, the Blaupunkt can display images at 120 Hz at Full HD resolution. Sure, we lose 4K details then, but for those playing more dynamic, online shooters where fluidity is more important than resolution, it’s a really nice and unexpected addition in such an inexpensive piece of equipment. Besides these two points, however, you won’t find anything else here. There are no advanced systems for improving fluidity for gamers or extensive gaming menu bars. It’s a simple screen for occasional gaming.

The Philips PUS9010 is truly a solid machine for gaming. It has everything that matters: VRR, automatic game mode (ALLM), and support for HGiG. The latter is a great feature—it allows HDR in games to be set exactly as the creators envisioned. The television handles 120 Hz refresh rates effortlessly at every popular resolution (1080p, 1440p, and 4K). It doesn't matter if you connect a PS5, Xbox, or a powerful PC—everything runs smoothly and just as it should. Gamers will also appreciate the Game Bar. It's a quick, clear menu that immediately shows whether low latency mode is active. This is especially useful when frequently switching between different consoles. The experience is completed by Ambilight. Evening sessions with this lighting are on a whole different level; the image seems larger, and dynamic scenes leave an even better impression. Even if someone isn’t a fan of such “gimmicks,” it’s hard to deny that it’s impressive.