TCL X11L vs TCL RM7L

Such a large number of zones did not only result in deep, inky blacks, but also in screen brightness. The X11L is an extremely bright television. Peak brightness can easily exceed 4,000 nits, and with the special "Boost" mode active it can, in specific conditions, even reach marketing figures around 9,000 to 10,000 nits. It is undoubtedly one of the brightest, if not the brightest, screens on the market. So how do these numbers relate to real film measurements? The results are very good, though of course far from the marketing claims. The brightness we measured in real film scenes was around 2,000 to 3,000 nits. That is an excellent result, given that the vast majority of content available is recorded and produced for those brightness levels, even the rare material mastered to 4,000 nits. But it also clearly shows that the figures the manufacturer touts do not always translate directly to the video material you have at home. The only "quirk" (if you can call it that) is that when very small, bright elements appear on screen, their brightness falls below 2,000 nits. The dimming algorithm does this deliberately to preserve deep blacks and minimise halo. This is entirely understandable, and the effect is still very impressive, but it also shows that even with such powerful hardware, Mini-LED technology has its limits and does not always work without compromise. In HDR itself, brightness is not the only thing that matters; colour saturation and the colours themselves do too. On the X11L these are very good thanks to the new Super QLED (SQD) quantum dots. The application of a new coating filter has delivered excellent results in covering the P3 colour gamut and the ultra-wide BT.2020. Although it does not reach the promised 100% of BT.2020, figures around 89 to 90% can be considered excellent. Colours are not far off those of RGB Mini-LED screens. We can even say they are more stable, due to a less demanding algorithm that RGB screens often struggle with.

TCL RM7L is a bright TV. In our measurements its peak brightness hovered around 1600 nits. That is clearly less than the C7L, which can approach 2600 nits, but in real film scenes the difference between the models is not that large. In less demanding shots with many bright elements, the RM7L can sustain about 1000 nits, and sometimes even a little more, getting close to 1500 nits. It performs worse in dark scenes with small points of light, where their brightness can fall to around 500 nits. This is not random behaviour. The TV intentionally dims fine details to better control the backlight and preserve higher contrast. That comes at the expense of their intensity, but it is typical behaviour for TVs with local dimming in a similar price bracket.

Colour gamut coverage

In HDR not only brightness matters but also colour. And here the RM7L has plenty to show. Colours are highly saturated and a wide colour gamut is one of its major strengths. In our DCI-P3 measurements it reached about 96%, and BT.2020 around 83%. It is worth remembering that on a TV with this kind of backlight the result can vary depending on the scene. On test patterns colours look best, while in films their saturation is sometimes a little lower than on SQD Mini LED or QD-OLED TVs. The construction of the backlight itself is also interesting. The RM7L does not use the classic red, green and blue LED set. TCL used two green LEDs and one blue, with the red produced by a PFS phosphor. This shows up in spectrometer measurements, but it does not have a major impact on the picture. Colours are still rendered correctly.

Turning on what should theoretically be the best Filmmaker Mode, you expect a one-to-one image of what the director saw. On the X11L it's fairly good, but this mode has obvious faults, which our measurements immediately exposed. Let's start with SDR. Both the white balance and the gamma are simply misaligned. The whites contain too much blue and red, giving the screen a slight pink tint. That also affected the gamma, which instead of holding the cinematic 2.4 drifts closer to 2.2. What did that result in? The whole image is therefore more pushed and looks artificially brighter. The worst comes at the end, namely the HDR measurements. Apart from this slight white-balance shift, the X11L fails on the brightness-management curve, the so-called EOTF. What we saw in the measurements immediately explains what we noticed earlier in films. The image is unnaturally brightened because the curve is massively overshot above the reference. The TV simply blatantly lifts the dark parts of the picture to create a "wow" effect, completely ignoring the director's intent.

We checked the out-of-the-box colours in Filmmaker Mode, the best picture setting available to the user. TCL has been using it in its TVs for two years, and its aim is to reproduce the image as faithfully as possible in line with the creators' intent. On the RM7L it was indeed the most accurately set mode, although it was not without flaws. The biggest problem was the white balance. Too much red and blue made the image shift towards slightly pink tones. This was visible in both SDR and HDR. On top of that the brightness response was slightly boosted, making the picture appear a little brighter but at the same time less contrasty than it should be.

After professional calibration we primarily managed to fully tame the SDR signal. Here the X11L responded perfectly to our adjustments. We were able to completely correct the white balance, remove that pink tint and set gamma to a stable 2.4. After that the picture finally became consistent with the director's vision, natural and free of artificial boosts. We also made minimal tweaks to HDR, but the TV's biggest flaw remained unchanged. It's of course about how the X11L manages its brightness and how much it overshoots the EOTF curve. Unfortunately, TCL provides virtually no tools to adjust this parameter. Even during professional calibration the software offers no way to rein in this curve, so the TV will always tend to brighten the image in HDR on its own.

Thanks to the fairly extensive calibration menu we were able to correct the vast majority of the previously described issues. The biggest change concerned the white balance. After calibration it now looks very good, so the picture shed its pinkish tint and became much more neutral. The luminance response has also improved. Both the SDR gamma and the HDR EOTF curve are now much closer to the reference values. The picture is no longer unnecessarily brightened, and darker areas look more natural and have greater depth. Better luminance accuracy also affected the colours, which after calibration are noticeably more accurate. Not everything could, however, be set perfectly. With HDR material the RM7L still interprets part of the signal in its own way and does not always follow the reference curve precisely. This is most apparent in some darker scenes, where the TV can either slightly lift the shadows or darken them completely. That is where the earlier impression of a slightly brightened, less contrasty picture came from. Despite this, the calibration delivers a very good result. It removes the most visible errors and, above all, makes the picture much closer to how it should look.

Much like the C8L model we tested earlier, TCL has delivered a substantial upgrade in its flagship X series. It's all thanks to the MediaTek Pentonic 800 processor used in this model. Thanks to it, features for smoothing tonal transitions and even upscaling content to higher resolutions finally look as they should. The biggest Achilles' heel of previous TCL models has at last been addressed. The processor handles digital processing superbly and, in this respect, the TV no longer lags behind flagship models from Korea or even the most refined ones from Japan.

Upscaling and digital image processing are not the RM7L's strong suit. TCL has used the MediaTek Pentonic 700 chipset here, designated MT5896, which is not among the best processors when it comes to handling lower-quality source material. The biggest problems appear with heavily compressed content from YouTube or standard broadcast TV. The processor cannot effectively hide posterization and the characteristic banding between tones. The feature intended to smooth these issues does little to help, and can also interfere with the image too much, smoothing, for example, faces or fine textures. For that reason it is best simply not to use it.

Standard upscaling to 4K looks better. Lower-quality content is sufficiently sharp and retains an adequate amount of detail. It is not on a par with the best processors on the market, but for everyday viewing the result is entirely acceptable.

From a specification standpoint the X11L can impress, supporting refresh rates up to 144 Hz at 4K, and it can be pushed to as much as 288 Hz in Full HD. However, from a real-world usage perspective we were most interested in how the screen performs at 120 Hz. After all, that is the limit for today’s hardware, with current-generation consoles leading the way. How does that look in practice? Even though it uses a VA panel, the screen does not exhibit significant smearing. With very fast-moving objects you can notice a slight trailing, but it is subtle enough that it hardly stands out while gaming or watching sport. The motion smoothing feature called "Motion Clarity" is also very useful here, allowing you to adjust motion smoothness to your preference. Recommended settings can be found in the picture.

The RM7L features a 144 Hz VA panel, so from the outset it is well suited to sports, gaming and other fast-paced content. The high refresh rate also gives the motion interpolation more scope, allowing it to generate additional frames. On the RM7L it works well and, with the right settings, can noticeably improve motion smoothness without an excessive soap opera effect.

For gamers the X11L is simply a superb screen. TCL has already accustomed us to the fact that it packs virtually every available feature into its products, and the flagship from the X series is no different. Thanks to the new processor, the X11L has as many as four HDMI 2.1 ports with full 48 Gbps bandwidth. Naturally, HDMI 2.1 brings a set of very useful features, such as Auto Low Latency Mode (ALLM) and VRR frame synchronisation, covering the full refresh range up to 288 Hz. All these features can be conveniently controlled from the dedicated Game Bar. Interestingly, its appearance can be customised to your taste; there are three preset themes to choose from, directly referencing the Nintendo, PlayStation and Xbox consoles. And speaking of Xbox, the X11L also supports Dolby Vision Gaming without any issues.

When gaming in the standard HDR10 format, however, you need to bear in mind the specific tuning of the brightness curve, which can prove troublesome during initial setup. Although the TV supports HGiG, configuring everything via the PlayStation or Xbox system menu can be difficult. The screen’s algorithms tend to artificially brighten the test checkerboard pattern, making it really hard to hit the correct white clipping point by eye. For HDR10 to look correct, we suggest manually setting the console brightness in the console menu to around 2,500–3,000 nits.

The RM7L earns almost nothing but praise when it comes to features for gamers. The TV supports ALLM, VRR and Dolby Vision Gaming and works properly with HGiG, so it’s hard to point to any major omissions in that regard. In practice this means automatic switching to a low-latency mode, smoother motion at variable frame rates and accurate brightness reproduction in HDR games. There’s also a very useful Game Bar. From it you can quickly check frame rate, VRR status, signal format or aspect ratio, and change the key settings without leaving the game. TCL has also added a few extra options, such as a crosshair overlay and brightening of dark image areas, which can be handy in some titles. The biggest drawback stems from the use of the Pentonic 700 processor. Only two of the four HDMI ports support the full HDMI 2.1 standard. That won’t matter much with a single console, but if you connect two consoles and a PC you may run out of ports, especially since one of those ports may be needed for eARC and a soundbar.