TCL C7L vs TCL X11L

The TCL C7L is, without doubt, an extremely bright TV. In synthetic tests using static test patterns it can reach peak brightness of around 2800 nits. That's a truly phenomenal result, given the price bracket it occupies. Unfortunately, measurements with real film scenes are not as spectacular as the white-square tests. Brightness in real HDR footage on the C7L falls to around 1200 nits. That's still very good, because the vast majority of modern films are graded to that level. However, when small, pinpoint elements appear on screen, the brightness of those details drops dramatically, even to around 400 nits, which reduces the HDR impact. The TV does this deliberately to preserve black levels and avoid excessive blooming. This is somewhat understandable, but it also shows that Mini LED technology is not completely without compromises in this respect. As for the HDR effect itself, alongside brightness the key factor is, of course, colour. Thanks to the use of new 'super' quantum dots, the colours are simply superb and among the best on the market. The TV is able to achieve very wide coverage of the BT.2020 and DCI-P3 colour gamuts, matching the best RGB Mini-LED screens with ease. Best of all, the C7L can maintain such high colour saturation regardless of the scene being displayed, which is often problematic in competing RGB Mini-LED TVs.

Such a large number of zones did not only result in deep, inky blacks, but also in screen brightness. The X11L is an extremely bright television. Peak brightness can easily exceed 4,000 nits, and with the special "Boost" mode active it can, in specific conditions, even reach marketing figures around 9,000 to 10,000 nits. It is undoubtedly one of the brightest, if not the brightest, screens on the market. So how do these numbers relate to real film measurements? The results are very good, though of course far from the marketing claims. The brightness we measured in real film scenes was around 2,000 to 3,000 nits. That is an excellent result, given that the vast majority of content available is recorded and produced for those brightness levels, even the rare material mastered to 4,000 nits. But it also clearly shows that the figures the manufacturer touts do not always translate directly to the video material you have at home. The only "quirk" (if you can call it that) is that when very small, bright elements appear on screen, their brightness falls below 2,000 nits. The dimming algorithm does this deliberately to preserve deep blacks and minimise halo. This is entirely understandable, and the effect is still very impressive, but it also shows that even with such powerful hardware, Mini-LED technology has its limits and does not always work without compromise. In HDR itself, brightness is not the only thing that matters; colour saturation and the colours themselves do too. On the X11L these are very good thanks to the new Super QLED (SQD) quantum dots. The application of a new coating filter has delivered excellent results in covering the P3 colour gamut and the ultra-wide BT.2020. Although it does not reach the promised 100% of BT.2020, figures around 89 to 90% can be considered excellent. Colours are not far off those of RGB Mini-LED screens. We can even say they are more stable, due to a less demanding algorithm that RGB screens often struggle with.

When it comes to out-of-the-box colours, what's new in TCL TVs, including the C7L model, is the addition of a picture mode called Filmmaker Mode. This is significant because such a mode was not previously available from this manufacturer. As the name suggests, this setting is meant to present the picture with the filmmaker's full intent. After our tests we can confirm that it is, without doubt, the best built-in mode on this TV if you want faithful colour reproduction straight out of the box. However, we certainly wouldn't say it's perfect. Like most devices on the market, this C7L also had some factory calibration errors. The white balance in Filmmaker mode drifted towards a slightly greenish-yellow tint, caused mainly by an excess of the green component and a noticeable shortfall in blue. Of course, this won't be a major drawback for the average viewer, but if you care about perfect whites, natural skin tones and getting the full potential out of the structure of those new "super" quantum dots, the TV really needs professional calibration.

Turning on what should theoretically be the best Filmmaker Mode, you expect a one-to-one image of what the director saw. On the X11L it's fairly good, but this mode has obvious faults, which our measurements immediately exposed. Let's start with SDR. Both the white balance and the gamma are simply misaligned. The whites contain too much blue and red, giving the screen a slight pink tint. That also affected the gamma, which instead of holding the cinematic 2.4 drifts closer to 2.2. What did that result in? The whole image is therefore more pushed and looks artificially brighter. The worst comes at the end, namely the HDR measurements. Apart from this slight white-balance shift, the X11L fails on the brightness-management curve, the so-called EOTF. What we saw in the measurements immediately explains what we noticed earlier in films. The image is unnaturally brightened because the curve is massively overshot above the reference. The TV simply blatantly lifts the dark parts of the picture to create a "wow" effect, completely ignoring the director's intent.

After professional calibration we managed to greatly improve the situation in the factory Filmmaker Mode. After our corrections, the errors in the ColorChecker test and across the wide colour gamut fell below the threshold of human perception, that is below a value of 3, which is a very good result. The TCL C7L definitely benefits from such a procedure in terms of colour fidelity, and it's hard to deny. Brightness management for HDR content looks a little worse after calibration, though. As I described earlier, even though we set this model up correctly, when you play real film scenes the TV can handle its brightness in a rather peculiar way. It often brightens some elements on screen contrary to the creator's intent, which is clearly visible in the EOTF traces measured from specific films. Despite this defect, or rather a specific characteristic of the television, one thing you can't fault is that after calibration the C7L was able to reproduce colours accurately.

After professional calibration we primarily managed to fully tame the SDR signal. Here the X11L responded perfectly to our adjustments. We were able to completely correct the white balance, remove that pink tint and set gamma to a stable 2.4. After that the picture finally became consistent with the director's vision, natural and free of artificial boosts. We also made minimal tweaks to HDR, but the TV's biggest flaw remained unchanged. It's of course about how the X11L manages its brightness and how much it overshoots the EOTF curve. Unfortunately, TCL provides virtually no tools to adjust this parameter. Even during professional calibration the software offers no way to rein in this curve, so the TV will always tend to brighten the image in HDR on its own.

This can be seen as, to some extent, the Achilles' heel of the C7L. Unfortunately, this TV uses the older MediaTek Pentonic 700 chip, which has never been famed for outstanding digital image processing. You can clearly see that in the behaviour of the progressive smoothing function, the feature responsible for reducing jagged edges and removing digital noise. It simply performs very poorly. When set to low, its effectiveness is almost non-existent. The only small plus is that the algorithm does not further spoil the picture or blur details unnecessarily. Upscaling, that is scaling lower-resolution content to 4K, performs slightly better. It is simply adequate and does not stand out against the competition. There is no denying that the C7L would benefit greatly in this regard if the manufacturer opted for the newer Pentonic 800 processor, which is now appearing in an increasing number of rival models.

Much like the C8L model we tested earlier, TCL has delivered a substantial upgrade in its flagship X series. It's all thanks to the MediaTek Pentonic 800 processor used in this model. Thanks to it, features for smoothing tonal transitions and even upscaling content to higher resolutions finally look as they should. The biggest Achilles' heel of previous TCL models has at last been addressed. The processor handles digital processing superbly and, in this respect, the TV no longer lags behind flagship models from Korea or even the most refined ones from Japan.

The TCL C7L uses a native 4K panel with a 144 Hz refresh rate, which at lower resolutions when connected to a PC can even reach up to 288 Hz. These are, of course, very high figures and impressive on paper, but bear in mind that almost all the dynamic content you’ll watch on this TV will still run at around a maximum of 120 Hz. To rein in that motion, the TV’s menu includes a motion-smoothing system called "Motion Clarity". It offers several preset modes, including a user mode that we strongly recommend you set manually using our tried-and-tested guides on our YouTube channel. There are two key sliders available. The first, "Blur Reduction", is responsible for cutting motion blur and improving sharpness in dynamic 60-fps material, such as sports broadcasts. The second slider, "Flicker Reduction", lets you add artificial frames to films and series shot in cinematic 24 or 30 frames per second. This, of course, can completely eliminate the irritating judder that appears during camera movement.

From a specification standpoint the X11L can impress, supporting refresh rates up to 144 Hz at 4K, and it can be pushed to as much as 288 Hz in Full HD. However, from a real-world usage perspective we were most interested in how the screen performs at 120 Hz. After all, that is the limit for today’s hardware, with current-generation consoles leading the way. How does that look in practice? Even though it uses a VA panel, the screen does not exhibit significant smearing. With very fast-moving objects you can notice a slight trailing, but it is subtle enough that it hardly stands out while gaming or watching sport. The motion smoothing feature called "Motion Clarity" is also very useful here, allowing you to adjust motion smoothness to your preference. Recommended settings can be found in the picture.

When it comes to gaming, the TCL C7L is simply an outstanding TV for players. Thanks to two HDMI 2.1 ports with full 48 Gbps bandwidth, you get access to all the key features required by console owners and powerful PC rigs. There’s a well-working ALLM mode with very low input lag and VRR frame synchronisation that operates over an impressive range from 48 to 288 Hz. Importantly, unlike some rivals, TCL has properly implemented the console HDR10 HGIG profile and supports Dolby Vision in games. The package is completed by a very well designed gamer panel, the Game Bar, which even lets you edit its appearance and change the theme so it perfectly matches the style of your console.

The only thing you can, and even should, criticise is that the TV offers only two full-spec HDMI 2.1 ports, while the other two are older HDMI 2.0. That creates quite a logistical problem. Why? Because one of the fast ports also handles the return audio channel eARC. In practice this means that if you connect a soundbar or home cinema system to the TV, you’ll be left with just one free HDMI 2.1 socket. If you have two consoles at home, or a console and a powerful PC, unfortunately you’ll have to give something up or keep juggling cables at the back of the case while trying to maintain convenient control of the audio system.

For gamers the X11L is simply a superb screen. TCL has already accustomed us to the fact that it packs virtually every available feature into its products, and the flagship from the X series is no different. Thanks to the new processor, the X11L has as many as four HDMI 2.1 ports with full 48 Gbps bandwidth. Naturally, HDMI 2.1 brings a set of very useful features, such as Auto Low Latency Mode (ALLM) and VRR frame synchronisation, covering the full refresh range up to 288 Hz. All these features can be conveniently controlled from the dedicated Game Bar. Interestingly, its appearance can be customised to your taste; there are three preset themes to choose from, directly referencing the Nintendo, PlayStation and Xbox consoles. And speaking of Xbox, the X11L also supports Dolby Vision Gaming without any issues.

When gaming in the standard HDR10 format, however, you need to bear in mind the specific tuning of the brightness curve, which can prove troublesome during initial setup. Although the TV supports HGiG, configuring everything via the PlayStation or Xbox system menu can be difficult. The screen’s algorithms tend to artificially brighten the test checkerboard pattern, making it really hard to hit the correct white clipping point by eye. For HDR10 to look correct, we suggest manually setting the console brightness in the console menu to around 2,500–3,000 nits.