Samsung S90H (WOLED) vs Philips PQS9011 / PQS9001 (The One 2026)

Samsung S90H in the WOLED variant is still an exceptionally bright TV for its price bracket, although compared with the QD-OLED version it is slightly dimmer. The difference is not as significant as in last year’s F series, where the gap could reach as much as 500 nits. Here the parameters of both panels are very similar, and differences in peak brightness are only in the order of 100–150 nits. In small-area measurements the S90H on the WOLED panel easily reaches levels close to 1500 nits. Such a reserve of power allows HDR dynamics to be reproduced phenomenally; all highlights, light reflections and explosions have the necessary punch, exactly as the creators intended in the editing studio. As with most OLED displays, when a very bright scene fills the whole screen protection systems activate and brightness naturally falls to around 700 nits. It is worth emphasising that this is still an excellent result on the market. Often noticeably better than many Mini LED screens in the same segment.

Colour gamut coverage

The biggest difference between the two S90H variants lies in colour reproduction and saturation. This results directly from the different construction of the WOLED panel, which uses an additional white subpixel. As a consequence, colours at very high brightness do not reach the same intense saturation, and the volume of the wide gamut is somewhat more limited than in QD-OLED. That does not change the fact that in everyday use these differences will be hard for most viewers to spot. The DCI-P3 space we measured reaches nearly 99% on the WOLED panel, which means that in the vast majority of real film scenes both variants will present an almost identical picture. The true distance only reveals itself in rarer, exceptionally demanding productions that use the ultra-wide BT.2020 gamut. Due to the specifics of the WOLED panel’s construction, coverage of that standard is about 15% lower compared with the S90HAT with a QD-OLED panel, so the brightest, heavily lit colours in HDR may appear slightly less vivid.

Philips PQS9000 is a moderately bright TV. In our HDR scenes it reached roughly 450 to just over 500 nits. That's enough to notice a difference compared with SDR. Reflections of the sun, lamps or flares have a bit more sparkle than on basic TVs, whose brightness often tops out around 300 nits. However, it is not a level at which bright elements make a particularly strong impression. The biggest limitation remains contrast. Without local dimming, when the TV brightens a bright object it also raises the black level around it. There is therefore no clear separation of strong highlights from a dark background, and it is that contrast that can show what HDR can do. The PQS9000 offers more than the cheapest models, but despite decent brightness the effect remains fairly basic.

Colours

Philips deserves praise for the colours. Although the manufacturer calls this model QLED, in reality a PFS phosphor is used here instead of quantum dots. That choice does not prevent the TV from achieving good results. On both test patterns and in measurements of film scenes we recorded about 94% coverage of DCI-P3 and 75% of BT.2020. For this class of TV that is really good. In practice this means that the vast majority of colours used in HDR films and series will have appropriate saturation. Vibrant green or intense red are not much of an issue and add appeal to the picture. Limitations are easier to notice in some games and in rarer content that use the most saturated shades of the wide BT.2020 gamut. In such situations, displays with wider colour coverage, such as SQD or RGB LED, can show more. In its price bracket, however, the PQS9000 has nothing to be ashamed of.

In Filmmaker mode, which we strongly recommend switching on straight out of the box, the S90H offers very good factory colour tuning. Colours are natural and faithful to the creators' intent, without the irritating oversaturation found in more aggressive presets. However, as is often the case without full calibration, no two units are identical. In our test the white balance was slightly lacking in blue, causing the image to lean a little towards warmer, yellowish tones. This was most noticeable in bright scenes, such as the snowy sequences from Star Wars. Additionally, the gamma curve was slightly low at 2.2, which produced a minor lift in shadow detail. In HDR mode the tuning was somewhat better, showing only a slight undersaturation in the red region.

Unfortunately, the factory picture settings for Film mode on the PQS9000 need refinement. In SDR the most noticeable problem is an excess of red in the white balance, which makes whites, greys and skin tones too warm, sometimes even slightly pinkish. On top of that the gamma runs below the reference across most of the range. The TV therefore brightens midtones and highlights, making the overall image look flatter than it should.

In HDR the white balance itself is much better. Apart from minor deviations the RGB components track closely, so there is no pronounced colour cast as in SDR. However, the EOTF curve shows a slight brightening of parts of the image, and the biggest issue appears in measurements of the wide colour gamut. Many hues deviate significantly from the target, with errors reaching levels of 8–9. The good gamut coverage we praised earlier therefore does not mean the TV hits specific colours equally well. It can display a wide colour range, but out of the box it does not use it very precisely.

After a full calibration it’s fair to say the S90H in WOLED guise looks almost perfect. In SDR mode colour inaccuracies drop to ultra-low levels and Delta E values very rarely exceed 2. That’s a phenomenal result, so if you care about perfectly faithful colour reproduction it’s definitely worth considering calibration. The calibrated HDR mode also performs very well, with the white balance stabilised and earlier deviations eliminated. After professional fine-tuning it’s really hard to find anything to criticise, because the TV delivers an image with almost reference-level naturalness and three-dimensionality. The slightly lower score in this category compared with the QD-OLED variant is solely due to the aforementioned limitation in saturation in extremely bright scenes; the tuning options and colour fidelity themselves are at the highest level.

Calibration brought a significant improvement, especially in SDR material. We managed to even out the white balance and remove the previous colour cast, and the Color Checker measurements now look really very good. Colours are much closer to what should be on screen, so with ordinary TV or SDR films we can be satisfied with the outcome. Unfortunately HDR somewhat spoils that result. On the one hand it is limited by the panel itself, because calibration won't improve contrast or replace local dimming. On the other hand there remain colour errors that we couldn't correct because the CMS settings, that is the colour management controls, were greyed out and inactive. That costs Philips points with us. The white balance can be fine‑tuned, but without access to wide‑gamut adjustments it's not possible to order HDR colours equally well. It's a shame, because the SDR results show the potential is there, but we weren't allowed to make full use of it everywhere.

In terms of posterisation reduction itself, Samsung has kept the solutions known from last year’s models. The dedicated gradient-smoothing function performs quite well and can effectively mask unwanted tonal banding, which is useful on a WOLED panel that is slightly more prone to banding. However, you should be aware of its aggressive behaviour. This mechanism, alongside the artefacts themselves, can clean up fine film grain and gently soften detail. Ultimately it is a matter of compromise, but if you want an absolutely faithful reproduction, it is safer to leave this option off.

Similarly, in the area of scaling it is difficult to call this a breakthrough. The S90H uses the same NQ4 Gen3 processor as its predecessor, so the upscaling quality was almost identical. The chip sharpens lower-resolution material very well, extracting a satisfying level of detail. Samsung still has not dealt with the longstanding overscan issue, though. With some older recordings or archive footage the edges of the image can be slightly cropped. It’s a minor flaw, but it’s a pity the manufacturer still hasn’t eliminated it.

Digital picture processing in the Philips PQS9000 performs well, though we have a few reservations. The "Distortion Reduction" function helps to smooth tonal transitions in lower-quality material, but it works rather unevenly. It can improve one part of the image, only to seem to lose its effect a moment later, still in the same scene, and show banding between shades again. A plus is that it doesn't remove film grain or fine noise, so the image retains its texture. We found the 'Medium' setting worked best and we recommend it. The upscaling to 4K itself is acceptable, although the image is very soft. Edges are heavily smoothed, which may leave some viewers feeling the picture lacks definition. In that case, it's worth slightly increasing the sharpness in the TV's menu, as this will make edges appear more defined. However, don't overdo the sharpening slider, otherwise artificial halos may appear instead of an improvement.

In terms of motion handling, the S90H is simply excellent. This year's panel offers a boosted refresh rate of up to 165 Hz, though in practice the benefit will mainly be for gamers connecting a high-end PC. For films, series or sports broadcasts such a high refresh rate makes no difference and the picture looks exactly the same as at the standard 120 Hz. Regardless of the source, however, the OLED panel's lightning-fast response time does its job, so motion is clean and the ghosting or smearing familiar from LCD screens simply does not occur here.

In terms of motion handling the Philips PQS9000 performs exceptionally well for an LCD TV. It's not just the 144 Hz refresh rate, but above all how quickly the panel itself responds. At 120 Hz there are virtually no typical trailing smears behind moving objects. What is particularly pleasing is that this also applies to darker scenes, where many VA panels clearly struggle. Here motion remains clear and, in this respect, Philips pleasantly surprised us.

The "Motion Styles" feature lets you adjust how motion is displayed. It includes two sliders: "Smoothness" and "Blur Reduction", allowing you to tailor the effect to the content you're watching and your own preferences. Our suggested settings are shown in the photo. Treat them as a starting point and try to find the level of smoothing that suits you best.

Players should feel at home with the S90H, because Samsung has left few reasons to complain in that respect. The TV has four HDMI 2.1 ports, each of which supports VRR, ALLM and high refresh rates. There’s also the Game Bar, a handy menu that lets you quickly check key parameters and change settings without leaving the game. Importantly, Samsung has also improved HGiG mode. In last year’s models it could cause problems when used with a console, but on the S90H it now works as it should. What really stands out against the competition is the Game Motion Plus feature. It’s a special motion smoothing mode for games that works best with titles running at 30 or 60 fps. Motion becomes noticeably smoother, while latency remains at a reasonable level. In our measurements it was under 50 ms, so gaming is still comfortable. That’s important, because on many TVs enabling a similar smoothing feature causes such a large increase in input lag that controls become noticeably sluggish. Samsung has managed to find a good compromise here. There’s still no Dolby Vision Gaming, but in practice Game Motion Plus may prove to be a much more useful feature.

Gaming features

In terms of gaming features, the Philips PQS9000 has a lot to offer. Four HDMI 2.1 ports let you connect several devices without having to choose which one gets the full-capability port. Consoles can use 120 Hz at Full HD, 1440p and 4K, while a PC can also make use of 144 Hz at 4K or 240 Hz if you drop to Full HD. There's also VRR, which matches the refresh rate to the frame rate and prevents screen tearing. Its range is 48 to 240 Hz, with the upper limit applying in Full HD mode.

ALLM is present, so the TV automatically switches to game mode, and HGiG works properly, which is useful when setting HDR on a console. There's also a Game Bar for quick access to settings and signal information. The list even includes Dolby Vision gaming, but it's hard to enjoy this option because of very high input lag. Aside from that caveat, the feature set is really solid.