Samsung R95H Micro RGB vs Philips PQS9011 / PQS9001 (The One 2026)

In terms of brightness the Samsung R95H shows that it is still a high-end TV, although the results are not always as spectacular as one might expect from a flagship Micro RGB model. In synthetic tests the TV can exceed 2400 nits, so it clearly has plenty of headroom. Crucially, it can maintain high brightness even when bright elements occupy a larger portion of the screen. In real cinematic scenes the situation is a little more complex. The R95H most often reaches around 1000–1400 nits, which still delivers a very good, powerful HDR effect. Bright sun, reflections or lights can look genuinely impressive, and the TV has enough power for HDR to be clearly distinguishable from standard SDR.

The problem appears mainly in very dark scenes with single, small light sources. Here the local dimming algorithm prioritises deep black and reducing halo over maximising the brightness of such elements. As a result, small highlights can be noticeably dimmed. Overall HDR therefore performs well, but not without limitations. The R95H has huge brightness headroom, especially in larger and brighter parts of the image, but in difficult dark scenes its capabilities are primarily limited by the way local dimming operates.

Colours

Colours were supposed to be the biggest revolution brought by RGB backlighting, and indeed the R95H shows considerable potential here. The assessment is not, however, as simple as synthetic measurements alone might suggest. On test patterns the TV performs superbly – BT.2020 coverage reaches almost 94%, and DCI-P3 98%, so particularly strongly saturated reds and greens can look truly impressive. The situation shifts somewhat when, instead of test patterns, we start measuring real film scenes. Then BT.2020 coverage falls to about 87%, and DCI-P3 to 93%. It seems that with more complex images the RGB zones are not always able to maintain the same high colour saturation as on simple charts. They remain saturated, but the advantage of the new backlight is no longer as large as the manufacturer’s figures might suggest.

Philips PQS9000 is a moderately bright TV. In our HDR scenes it reached roughly 450 to just over 500 nits. That's enough to notice a difference compared with SDR. Reflections of the sun, lamps or flares have a bit more sparkle than on basic TVs, whose brightness often tops out around 300 nits. However, it is not a level at which bright elements make a particularly strong impression. The biggest limitation remains contrast. Without local dimming, when the TV brightens a bright object it also raises the black level around it. There is therefore no clear separation of strong highlights from a dark background, and it is that contrast that can show what HDR can do. The PQS9000 offers more than the cheapest models, but despite decent brightness the effect remains fairly basic.

Colours

Philips deserves praise for the colours. Although the manufacturer calls this model QLED, in reality a PFS phosphor is used here instead of quantum dots. That choice does not prevent the TV from achieving good results. On both test patterns and in measurements of film scenes we recorded about 94% coverage of DCI-P3 and 75% of BT.2020. For this class of TV that is really good. In practice this means that the vast majority of colours used in HDR films and series will have appropriate saturation. Vibrant green or intense red are not much of an issue and add appeal to the picture. Limitations are easier to notice in some games and in rarer content that use the most saturated shades of the wide BT.2020 gamut. In such situations, displays with wider colour coverage, such as SQD or RGB LED, can show more. In its price bracket, however, the PQS9000 has nothing to be ashamed of.

For assessing factory colour reproduction we naturally chose the Filmmaker mode, the setting that is supposed to be closest to how the picture was intended by the creators. Here, unfortunately, the R95H does not fully exploit the potential of its panel. The biggest problem in SDR concerns the gamma. The image is noticeably brightened across almost the entire range, which makes it lose some depth and look flatter than it should. The white balance itself is also not ideal; as brightness increases there is a red bias and a lack of blue, making the image too warm. This is especially visible in bright elements and skin tones, which can look more "reddish" than they should.

It looks similar in HDR. The EOTF curve is above the reference value for a significant part of the range, so the R95H again brightens the image compared with how it should look. Combined with the inaccurate white balance, this means the colours here are also not as precise as we would expect from a TV of this class. The factory Filmmaker mode is therefore not the R95H's strong suit. At first glance the picture may look impressive because it is bright and highly saturated, but in terms of fidelity to the source material there is still plenty of room for improvement.

Unfortunately, the factory picture settings for Film mode on the PQS9000 need refinement. In SDR the most noticeable problem is an excess of red in the white balance, which makes whites, greys and skin tones too warm, sometimes even slightly pinkish. On top of that the gamma runs below the reference across most of the range. The TV therefore brightens midtones and highlights, making the overall image look flatter than it should.

In HDR the white balance itself is much better. Apart from minor deviations the RGB components track closely, so there is no pronounced colour cast as in SDR. However, the EOTF curve shows a slight brightening of parts of the image, and the biggest issue appears in measurements of the wide colour gamut. Many hues deviate significantly from the target, with errors reaching levels of 8–9. The good gamut coverage we praised earlier therefore does not mean the TV hits specific colours equally well. It can display a wide colour range, but out of the box it does not use it very precisely.

The R95H responds very well to calibration. In SDR we managed to set the white balance and gamma almost perfectly, and colour errors fell to a very low level. The difference compared with the factory settings is therefore substantial and after calibration the picture looks noticeably more natural. In HDR we can also make considerable improvements, particularly in terms of white balance and overall colour accuracy. The issue of managing brightness and colour saturation is somewhat different, though. At a certain point we run up against limitations inherent in the RGB backlight and local dimming. Individual zones must control both the brightness and the colour of the light simultaneously, so in more demanding scenes it is not always possible to achieve exactly the same saturation and brightness that the TV shows on simple test patterns. Calibration simply cannot completely overcome that. Despite this, after calibration the R95H delivers accurate image reproduction, and most of the errors we saw on the factory settings can be effectively eliminated.

Calibration brought a significant improvement, especially in SDR material. We managed to even out the white balance and remove the previous colour cast, and the Color Checker measurements now look really very good. Colours are much closer to what should be on screen, so with ordinary TV or SDR films we can be satisfied with the outcome. Unfortunately HDR somewhat spoils that result. On the one hand it is limited by the panel itself, because calibration won't improve contrast or replace local dimming. On the other hand there remain colour errors that we couldn't correct because the CMS settings, that is the colour management controls, were greyed out and inactive. That costs Philips points with us. The white balance can be fine‑tuned, but without access to wide‑gamut adjustments it's not possible to order HDR colours equally well. It's a shame, because the SDR results show the potential is there, but we weren't allowed to make full use of it everywhere.

The Samsung R95H uses the new Micro RGB AI Processor, but in practice we didn't notice a big leap compared with the NQ4 AI Gen2 or Gen3 chips found in Samsung's other TVs. The upscaling itself still performs very well. The image is smoothed appropriately, yet retains plenty of sharpness and does not look overly soft. That's definitely one of Samsung's stronger points. It's a pity that with very low-resolution material you still can't completely disable overscan.

The processor also handles colour gradation well and can effectively smooth unwanted posterization. The noise reduction function is really effective, but you need to use it with care. At higher settings it can start to interfere quite heavily with the image and even remove natural film grain. For that reason it's best used only when the source material is actually heavily compressed.

Digital picture processing in the Philips PQS9000 performs well, though we have a few reservations. The "Distortion Reduction" function helps to smooth tonal transitions in lower-quality material, but it works rather unevenly. It can improve one part of the image, only to seem to lose its effect a moment later, still in the same scene, and show banding between shades again. A plus is that it doesn't remove film grain or fine noise, so the image retains its texture. We found the 'Medium' setting worked best and we recommend it. The upscaling to 4K itself is acceptable, although the image is very soft. Edges are heavily smoothed, which may leave some viewers feeling the picture lacks definition. In that case, it's worth slightly increasing the sharpness in the TV's menu, as this will make edges appear more defined. However, don't overdo the sharpening slider, otherwise artificial halos may appear instead of an improvement.

Samsung R95H has a 165 Hz panel, so its motion handling is really good. At 120 Hz, for example when gaming on a console or watching sport, motion blur is minimal, and when connected to a PC you can use the full 165 Hz and further improve motion clarity. However, bear in mind it is still a VA panel, so it does not respond as instantly as OLED. You may sometimes notice a faint trail behind a moving object, but from a normal viewing distance this is unlikely to be bothersome. For films and TV shows you can also use the adjustable motion smoothing. You can keep the more cinematic 24 fps look or gradually smooth the motion if you prefer a smoother picture. Samsung gives plenty of flexibility here, so you can easily choose a setting to suit your own preferences.

In terms of motion handling the Philips PQS9000 performs exceptionally well for an LCD TV. It's not just the 144 Hz refresh rate, but above all how quickly the panel itself responds. At 120 Hz there are virtually no typical trailing smears behind moving objects. What is particularly pleasing is that this also applies to darker scenes, where many VA panels clearly struggle. Here motion remains clear and, in this respect, Philips pleasantly surprised us.

The "Motion Styles" feature lets you adjust how motion is displayed. It includes two sliders: "Smoothness" and "Blur Reduction", allowing you to tailor the effect to the content you're watching and your own preferences. Our suggested settings are shown in the photo. Treat them as a starting point and try to find the level of smoothing that suits you best.

In terms of gaming the Samsung R95H is almost a complete TV. When you connect a PS5 or Xbox Series X you can use 4K at 120 Hz, VRR and ALLM, and the TV also works correctly with HGiG. The only larger omission is Dolby Vision Gaming, which Samsung simply does not support, as with its other televisions. There is also the Game Bar, already seen on other Samsung models, which lets you quickly check the frame rate, VRR status or HDR format and change the most important settings without leaving the game. You can also brighten darker parts of the picture or change the screen aspect ratio.

Samsung also offers Game Motion Plus, a motion-smoothing function developed specifically for games. It makes most sense in titles running at 30 fps, where it can noticeably improve smoothness and make camera movement feel much more pleasant. You should remember, though, that this comes at the cost of higher input lag (about 60 ms), so it is probably not the best choice for online or more fast-paced games. It's also worth mentioning the Gaming Hub, which lets you run some games directly from the cloud without connecting a console. In terms of gamer-focused features, it is therefore hard to find any major shortcomings in the R95H.

Gaming features

In terms of gaming features, the Philips PQS9000 has a lot to offer. Four HDMI 2.1 ports let you connect several devices without having to choose which one gets the full-capability port. Consoles can use 120 Hz at Full HD, 1440p and 4K, while a PC can also make use of 144 Hz at 4K or 240 Hz if you drop to Full HD. There's also VRR, which matches the refresh rate to the frame rate and prevents screen tearing. Its range is 48 to 240 Hz, with the upper limit applying in Full HD mode.

ALLM is present, so the TV automatically switches to game mode, and HGiG works properly, which is useful when setting HDR on a console. There's also a Game Bar for quick access to settings and signal information. The list even includes Dolby Vision gaming, but it's hard to enjoy this option because of very high input lag. Aside from that caveat, the feature set is really solid.