Samsung DU7192 (VA) vs Philips OLED770

In the luminance charts, the peak brightness of the television is around 280 nits. Unfortunately, this value is too low to fully enjoy HDR effects, which require significantly higher luminance. In the tested materials, such as The Meg and Gemini Man, the lack of adequate brightness severely limits the magic of HDR, and the details in the brighter parts of the image are not sufficiently highlighted. For users primarily consuming SDR content, this level of quality may be acceptable, but it is definitely not enough when it comes to HDR. Additionally, the coverage of the DCI-P3 colour palette at 82% does not favour presenting HDR content in its full glory. The limited colour gamut makes it difficult for the television to reproduce vibrant and diverse colours, which is crucial for achieving a cinema-like experience.

The Philips OLED770 does not attempt to compete with the brightest OLEDs on the market, and it would be difficult to expect that, as it is the entry-level model in Philips' range for 2025. In our measurements, it reached a maximum of around 700 nits, which allows enjoyment of HDR effects in scenes where light appears sporadically – for example, in the flash of headlights or a starry sky. In such moments, the image can truly be stunning. However, it is different when there are more bright elements on the screen. The television, like many cheaper OLEDs, limits luminance in those situations, causing the entire image to noticeably dim. This was best observed in a scene from the film The Meg, where the sun comes out behind an oil rig – the brightness then dropped to around 250 nits, which is almost three times less. The HDR effect remains pleasant to the eye, but it is worth being aware that this model performs best in scenes with less intense light. Fortunately, the OLED770 has a trump card – the coverage of the DCI-P3 colour gamut is as high as 99%, so colours in films and games are vivid and very close to what the creator intended to convey.

The best factory mode we relied on during testing turned out to be "Filmmaker". Although this mode is the closest to the creators' intent for films, it is not without certain imperfections. The white balance chart in both SDR and HDR clearly shows a dominance of red, resulting in significant yellowing, particularly noticeable in whites and on actors' faces. In HDR mode, there is also a slight dominance of green, which, however, does not have as much impact on the perception of the image. The gamma, which is responsible for brightness in SDR materials, performed quite well, but with one serious caveat. In the darkest parts of the image, it was too low, causing excessive brightness in those scenes, depriving the film of drama and contrast. For HDR, the white balance remains at a similar level; however, the EOTF curve chart draws attention. At the beginning, the curve clearly bulges, leading to a strong brightness in the darkest scenes. Then the result suddenly drops below the reference line, resulting in an overly dark image and a loss of dynamics in the brighter parts.

In summary, the "Filmmaker" mode, despite its advantages, requires refinement – especially regarding white balance and proper management of brightness in the darkest and brightest parts of the image. In its current form, it may be acceptable for less demanding users, but for viewers expecting precise image reproduction, it may leave much to be desired.

The first measurements already show that the factory settings of the Philips OLED770 have quite a lot to improve even in Filmmaker mode. The white balance chart clearly shows a lack of blue, resulting in a slightly yellowish tint to the image. In practice, the white is not snowy but leans towards warmer tones – which some may even appreciate, but from the perspective of accuracy, this is a deviation from the norm. The gamma, on the other hand, tends to the darker side – the average value is around 2.6 instead of the reference 2.4. In the midtones, the image appears subdued and more saturated, which may seem too "filmic," but detracts somewhat from naturalness. However, the most issues are evident in colour reproduction. The average error is relatively high, and some colours – particularly shades of grey – deviate significantly from what one should see. In everyday viewing, this means that sometimes colours may look less natural than we would like.

Even for its lower models, Samsung offers advanced image calibration tools, which allow for significant improvement of the factory settings. We undertook this task, and the results turned out to be more than satisfying. The white balance, which previously exhibited a strong yellowish tint in both SDR and HDR, was significantly improved. Although slight deviations from the norm can be noticed, the overall effect is much cleaner and more natural than before calibration. As a result, whites and skin tones look much better. We also managed to properly shape the gamma in SDR materials, which allows for achieving the maximum contrast that this television can offer. The EOTF curve, responsible for HDR materials, was also improved – the image is no longer brightened or darkened as drastically as it was before calibration. Despite these successes, HDR materials still struggle with high deltaE error values. The main reason lies in the limited brightness of the television, which does not allow for a complete representation of the dynamics of HDR content. Nevertheless, after calibration, the image is clearly better and more aligned with the creators' intentions. For users seeking the best possible quality in this class of equipment, calibration is definitely recommended.

The Philips OLED770 from the outset signalled that it harboured significant potential, but in its factory settings, it was difficult to see this fully. The picture was often too warm, and some colours appeared to have lost their naturalness along the way. Calibration, however, revealed that it is a very responsive television – it reacted to every adjustment and almost immediately unveiled another layer of its capabilities. The white balance could be set in both SDR and HDR to eliminate the yellowish tint and introduce a neutral, clear white. The gamma stabilised closer to perfection, allowing midtones to regain their naturalness, and shadows stopped being artificially darkened, perhaps even with a slight brightening effect. The result was obvious... Films were watched with greater ease; the picture had cinematic depth, but without the feeling that something was exaggeratedly darkened. However, the most interesting aspect was the work on colours. Factory errors were not dramatic but slightly noticeable – skin tones were sometimes too warm, and grey didn’t always have the shade we expected. After calibration, the error values dropped to around 2, and in many cases even below 1. This is certainly a level lower than the threshold of human perception. In other words, after correction, the colours finally "clicked" into place. Looking at the screen, we had the impression that the television had begun to speak with its full voice. Like an instrument that has finally been well tuned.

The tonal smoothing function operates in two modes – "off" and "auto". Turning it off causes gradation issues, while the "auto" mode ensures smooth transitions, but at the cost of grain and detail, which are often blurred. Due to these limitations, we do not recommend using this feature, as confirmed by our tests conducted with it turned off.

Scaling of lower resolution materials in this model is not impressive. Details are blurred, and the edges of objects may contain artifacts. This limitation makes the television perform better with higher resolution content.

The issue of the aforementioned colour banding can largely be mitigated thanks to the 'distortion reduction' feature, which is an algorithm for smoothing tonal transitions in Philips. It performs best at a low setting – effectively eliminating unwanted colour bands while not introducing strange artefacts or losing image detail. This is one of those features that is truly worth leaving switched on.

The situation is somewhat worse regarding upscaling. The image from a lower resolution can be too soft, while in some areas, characteristic 'jaggies' appear. The impression is that the algorithm is trying to reconcile two conflicting directions – smoothing and sharpening – and ultimately fails to find a happy medium. As a consolation, it can be added that the television has no issues with overscan, meaning it does not cut off the edges of the image, which sometimes occurs in other competing models.

Although the Samsung DU7192 is the lowest model in the manufacturer's range, it is equipped with motion smoothing technology. While the functionality of this solution is significantly limited compared to more expensive models, its presence alone distinguishes the television amidst competitors in this price bracket. The TV supports a maximum refresh rate of 60 Hz, which is sufficient for comfortable viewing of films and series, but may be inadequate for dynamic content such as sports. In the motion smoothing menu, we can find, among other things, the "Judder Reduction" feature. Unfortunately, its performance leaves much to be desired – regardless of the setting, the picture exhibits the characteristic stutter known from materials recorded at 24 frames per second, making this feature practically ineffective.

The issue of the matrix in the Philips OLED770 is not entirely straightforward. The manufacturer claims a 120 Hz panel, but our measurements showed that the screen can accept a 4K signal even at 144 Hz. That sounds like great news – after all, who wouldn't want an additional mode for PC gamers at this price? However, the reality turned out to be more complex. With 120 Hz content, the television behaves like most OLEDs – the image is absolutely clear, with no trace of ghosting or blurring, making it perfect for both dynamic games and sports broadcasts. The problem only arises at 144 Hz. Unlike models with official support for this frequency, here you can observe the phenomenon known as frame skipping. This means that the television cannot display all the frames – some are skipped, causing motion to lose smoothness, and double contours appear on the screen. The effect resembles the operation of the BFI function, which Philips does not offer in this model anyway.

Samsung DU7192 is equipped with HDMI 2.0 ports, which is expected in this price range. This limitation means there is no support for the full capabilities of the latest generation consoles, such as VRR technologies. The television only offers a basic feature for gamers – automatic switching to low latency mode (ALLM), and support for basic HDR for games in the HGiG standard. HGiG allows for the display of HDR content in games according to manufacturers' guidelines; however, the limited brightness of the television does not allow for full enjoyment of the effects that this standard offers. Unfortunately, there is a lack of conveniences such as GameBar, which is increasingly found even in cheaper models and greatly facilitates quick adjustment of settings for games. The presence of this feature could significantly enhance user comfort, especially for those who frequently change display modes.

If someone is looking for a television for gaming, the Philips OLED770 is a contender that is hard to ignore. The mere fact that we have an OLED here provides an excellent starting point – perfect black and infinite contrast make evening sessions in atmospheric games look as if they were lifted straight from the cinema. On top of that, there is the Ambilight system, which consists of LEDs on the back of the television that extend the image onto the wall behind the screen. The effect is such that even playing FIFA can look like a small spectacle, and in horror games the atmosphere becomes truly thick. From a technical standpoint, it's also quite decent. The Philips OLED770 supports variable refresh rate (VRR) up to 120 Hz, has an automatic mode for gamers (ALLM), and if someone is using an Xbox Series X, they can also count on Dolby Vision support in games. One must only know that in this mode the input lag is slightly higher than standard, though still at an acceptable level. As a bonus, we get the “Game Bar” panel, which is a special tool bar for gamers. It isn’t the most conveniently designed solution, but it allows you to check key parameters without leaving the game. Overall, this results in a television that, on one hand, has all the essential gaming features, and on the other, can add something unique – Ambilight. And it is this mix of technology and visual effect that makes the OLED770 one of the better screens for gaming at home.