PHILIPS PUS9010 (IPS) vs LG OLED G6 (G64LW, G66LS)

In the Philips PUS9010 version with an IPS panel, the HDR brightness unfortunately performs worse than in the previously tested 55-inch model with a VA panel. The difference reaches about 100 nits, which is quite noticeable given the relatively low values. While the VA version could exceed 500 nits, here the maximum brightness is around 400 nits. This level still allows for watching movies and series in HDR, especially on streaming platforms, but the effects are clearly muted. Bright elements do not have the same impact, and scenes requiring high luminance appear less impressive. On the positive side, the coverage of the DCI-P3 colour gamut is commendable. The IPS version offers around 91%, which is about 5% more than the variant with a VA panel. This translates to somewhat better colour saturation in HDR content, despite the lower brightness. Colours can appear more vibrant and cohesive, especially in colourful scenes.

The LG G6 is currently one of the brightest OLEDs on the market. Its peak brightness reaches nearly 2500 nits, and what’s best – this has a direct impact on real film scenes. The television flawlessly extracts details in the bright areas of the image. And this is regardless of whether we are talking about very small points like stars in the sky or slightly larger elements on the screen. Naturally, with full-screen, uniformly white scenes, the brightness of the G6 decreases due to the panel protection system (ABL). However, in real, varied cinematic shots, this value still hovers around 2000 nits, which can be considered an outstanding result. The coverage of the colour palette also deserves praise. The new second-generation Tandem OLED panel only brought a cosmetic change but still an improvement. The coverage of the DCI-P3 palette reaches nearly 99.5%, whereas for the ultra-wide BT.2020, it is around 84%. These are very good results, although it’s worth remembering one thing: at extremely high brightness levels, the colour volume will be lower than in Samsung Display’s QD-OLED panels due to the use of a white sub-pixel (WOLED). However, in everyday content and most films, catching this difference will be very difficult.

We assessed the colour reproduction, as always, on the factory settings, focusing on the movie mode, which for Philips usually provides the best starting point. This is also a good moment to demonstrate how much the same TV model can vary depending on the type of panel used. Looking at the white balance, the overall tendency remains similar to the variant with the VA panel. Excessive red in the whites is still noticeable, but in the tested unit with an IPS panel, there are also deficits in the blue channel. As a result, the image has a slightly different colour character, which can be clearly seen in the comparative materials. This is a very good example illustrating why ready-made settings downloaded from the internet do not always work even within the same model.

However, returning to the assessment itself, this unit performs quite well, especially with SDR content. Colour tests show correct saturation and consistency, with no glaring errors that could interfere with everyday viewing. In HDR materials, slight deficits in reds can already be noticed, but these are not flaws that spoil the overall perception of the image. The biggest limitations do not come directly from the colours, but rather from the white and black levels. The use of an IPS panel and slightly lowered gamma results in the image being slightly boosted in brightness, and the poor black levels further affect the perceived contrast. This makes the overall picture look brighter, but at the same time it loses depth, especially during evening viewing.

We tested the LG G6 in the best factory mode in terms of colour fidelity, namely FILMMAKER MODE. In the case of our test unit, this mode was quite well tuned straight out of the box. In SDR content, the only issue we could point out was the white balance, which tended to drift towards warmer tones. Consequently, the image could occasionally appear slightly yellowed; however, overall, this was not an bothersome problem. The G6 performed a bit worse with HDR content. There, we noted too much blue component in the white balance, which caused the image to take on cooler hues, resulting in fairly noticeable errors. As can be seen in our ColorChecker chart, the colours indeed drifted towards these cooler registers. Nevertheless, considering the factory settings, the television displayed a perfectly decent level. We do know, however, that OLED screens – particularly those from LG – respond excellently to professional calibration, which is why we immediately went ahead with it.

After calibration, the picture was brought to a truly sensible level. The overall look is coherent and natural, and when it comes to colour reproduction, it is difficult to unequivocally state whether we are dealing with a VA or IPS panel. This is a good sign, showing that the television has a solid foundation for further adjustments. It is worth noting the larger colour gamut coverage in this variant, which can subtly enhance the perception of colourful scenes, particularly in HDR content. However, this advantage is largely balanced out by the boosted black levels resulting from the use of an IPS panel. The limited black depth affects the perceived contrast, especially when watching in a dark room. Consequently, despite the noticeable improvement after calibration, the final assessment remains the same as in the variant with the VA panel. Better colours are unable to fully compensate for the weaker black levels.

After professional calibration, we gained complete control over the panel, and we managed to align all parameters to nearly zero. We successfully calibrated the white balance perfectly, which eliminated the factory cool and warm tints from the screen. The effects are clear as day in the ColorChecker test – the average colour reproduction errors dropped below the critical value of 1-2. And what does that mean? PERFECT colours, without any distortion! However, as reviewers, we must point out here how the LG G6 arbitrarily manipulates brightness, for which the EOTF curve is responsible. When looking at the standard synthetic chart, it might seem that the line is quite straight. However, the situation changes when we turn on the measurement filter, which shows how the television interprets brightness in real, moving film scenes (EOTF in MOVIES). Then it becomes evident that some of the tiniest parts on the screen are slightly over-brightened by the algorithm. Of course, for the average viewer, such a deviation will be practically unnoticeable, but in the test of such an expensive screen, it is worth noting – especially since we are talking about a model that has huge aspirations to be named the best television of the year.

In the Philips PUS9010, we find another iteration of the P5 Perfect Picture image processor, designed to improve the quality of inferior materials. One of the components of this system is the distortion reduction function, which is responsible for smoothing tonal transitions. It works effectively and indeed reduces the visible colour gradation. Unfortunately, it does so quite aggressively. In practice, it can dim details such as the texture of materials or film grain. This is a notable compromise, so we would not recommend it for movie screenings. However, it performs significantly better with more casual content like YouTube or regular television. The P5 processor also manages quite well with lower resolution materials. The image is soft, at times even too soft, but this can easily be corrected with the sharpness slider, adjusting the effect to personal preference. A positive aspect is also the lack of edge trimming in SD materials, which is still not standard in this class of televisions.

Whatever one may say about the G6’s problems with near-black signal, it must be fairly acknowledged that it handles heavily compressed material and lower resolution content exceptionally well. All unwanted, unsightly tonal transitions are effectively reduced here by the "Smooth Gradation" feature. At the "Low" setting, the algorithm works flawlessly – effectively masking the artefacts resulting from strong compression without destroying the sharpness and details in the frame. Higher levels of this function do indeed smooth the image further, but they start to blur the real elements of object texture, which is why we recommend keeping this slider at a low setting. As for the upscaling to 4K, the processor does an excellent job – edge sharpness and detail reconstruction are at the highest level, and in this regard, the G6 does not fall behind the world leaders at all.

Philips PUS9010 has a 4K panel with a refresh rate of 144 Hz, which will be appreciated primarily by sports fans and gamers. This is especially evident in dynamic scenes where the motion is sharp, and annoying blur is almost non-existent. When it comes to movies (standard 24 fps), Philips gives us a proven set of settings known from higher series. Two sliders are used to control motion. “Smoothness” allows you to adjust the image to your own taste: at low settings, we maintain a cinematic character, while moving the slider to the right gives us a perfectly smooth, albeit somewhat “theatrical” effect. On the other hand, “Motion Blur Reduction” is a function designed for sports – it ensures that fast-moving objects do not lose detail and remain clear.

LG G6 is an OLED television, so in the category of motion fluidity, it traditionally deserves the highest marks. The television supports very high refresh rates reaching up to 165 Hz in 4K resolution, but most importantly – on the screen, you will not notice any signs of blurring. The response time of the panel is almost instantaneous, ensuring that dynamic images remain perfectly sharp.

The Philips PUS9010 is a truly solid machine for gaming. It has everything that matters: VRR, automatic game mode (ALLM), and support for HGiG. The latter is a great feature – it allows HDR in games to be set exactly as the developers envisioned. The television handles 120 Hz refresh rates effortlessly at every popular resolution (1080p, 1440p, and 4K). Whether you connect a PS5, Xbox, or a powerful PC, everything functions stably and simply as it should. Gamers will also appreciate the Game Bar. This quick, clear menu immediately shows whether the low latency mode is active. This is especially useful when frequently switching between different consoles. The whole experience is complemented by Ambilight. Evening sessions with this backlighting take the atmosphere to a whole new level – the image seems larger, and dynamic scenes leave an even better impression. Even if someone isn’t a fan of such “gadgets”, it’s hard to deny that it’s impressive.

The LG G6 is a true monster for gamers and one of the best-equipped televisions on the market in this regard. The manufacturer has not skimped on features, equipping this model with as many as four full HDMI 2.1 ports with a maximum bandwidth of 48 Gbps. This means that no matter which port you plug in your PlayStation 5, Xbox Series X, or powerful PC, you will get the absolute maximum performance from them.

The television supports a full set of gaming technologies: from VRR (Variable Refresh Rate) to AMD FreeSync Premium Pro, and even Nvidia G-Sync Compatible. On top of that, it offers remarkably low, nearly imperceptible input lag and an exceptionally well-functioning Game Optimizer panel, which allows you to monitor signal parameters in real time. Gaming on this screen, with the perfect black of OLED and impressive refresh rates, is pure pleasure.