Philips OLED770 vs TCL C6KS / C69KS / Q6CS

The Philips OLED770 does not attempt to compete with the brightest OLEDs on the market, and it would be difficult to expect that, as it is the entry-level model in Philips' range for 2025. In our measurements, it reached a maximum of around 700 nits, which allows enjoyment of HDR effects in scenes where light appears sporadically – for example, in the flash of headlights or a starry sky. In such moments, the image can truly be stunning. However, it is different when there are more bright elements on the screen. The television, like many cheaper OLEDs, limits luminance in those situations, causing the entire image to noticeably dim. This was best observed in a scene from the film The Meg, where the sun comes out behind an oil rig – the brightness then dropped to around 250 nits, which is almost three times less. The HDR effect remains pleasant to the eye, but it is worth being aware that this model performs best in scenes with less intense light. Fortunately, the OLED770 has a trump card – the coverage of the DCI-P3 colour gamut is as high as 99%, so colours in films and games are vivid and very close to what the creator intended to convey.

And what about HDR? Here, the C6KS performs quite well and – as has become a recurring theme of this review – identically to the C6K model. The maximum brightness generated by this television is around 600 nits. In bright scenes, this translates to a really solid, cinematic effect, and generally, the video materials look good here. However, one must keep in mind the specifics of the dimming algorithm in this model. When very small, bright points (e.g., stars) appear against a dark background, the television can dim them quite significantly. The goal is simple: to eliminate blooming and maintain the best possible blacks. This is quite a reasonable compromise. Most viewers will definitely appreciate deep, "true black" more than additional micro-details, the display of which could cause the screen to appear greyed out. This is the nature of local dimming technology in this price range, and one must be aware of it. It is also worth noting that the TCL C69KS (C6KS) has an additional PFS coating, which is marketed under the slogan of QLED technology. Thanks to this, the colours are saturated and vibrant – our measurements showed that the coverage of a wide colour gamut reaches as much as 92% here.

The first measurements already show that the factory settings of the Philips OLED770 have quite a lot to improve even in Filmmaker mode. The white balance chart clearly shows a lack of blue, resulting in a slightly yellowish tint to the image. In practice, the white is not snowy but leans towards warmer tones – which some may even appreciate, but from the perspective of accuracy, this is a deviation from the norm. The gamma, on the other hand, tends to the darker side – the average value is around 2.6 instead of the reference 2.4. In the midtones, the image appears subdued and more saturated, which may seem too "filmic," but detracts somewhat from naturalness. However, the most issues are evident in colour reproduction. The average error is relatively high, and some colours – particularly shades of grey – deviate significantly from what one should see. In everyday viewing, this means that sometimes colours may look less natural than we would like.

Unlike the more expensive C6K model, the tested C6KS does not have an option in the menu labelled as Filmmaker Mode. Is this a reason to cry? Absolutely not. Our tests have shown that in practice, in terms of colour reproduction, the lack of this specific label makes virtually no difference. The best available Film/Cinema mode here offers an almost identical picture characteristic to the aforementioned Filmmaker in the more expensive model. So we get a very similar image, just under a different name. Therefore, if you were wondering whether paying extra for the C6K gives you better colours – the answer is no, in both cases the base is the same and requires slight adjustments.

The Philips OLED770 from the outset signalled that it harboured significant potential, but in its factory settings, it was difficult to see this fully. The picture was often too warm, and some colours appeared to have lost their naturalness along the way. Calibration, however, revealed that it is a very responsive television – it reacted to every adjustment and almost immediately unveiled another layer of its capabilities. The white balance could be set in both SDR and HDR to eliminate the yellowish tint and introduce a neutral, clear white. The gamma stabilised closer to perfection, allowing midtones to regain their naturalness, and shadows stopped being artificially darkened, perhaps even with a slight brightening effect. The result was obvious... Films were watched with greater ease; the picture had cinematic depth, but without the feeling that something was exaggeratedly darkened. However, the most interesting aspect was the work on colours. Factory errors were not dramatic but slightly noticeable – skin tones were sometimes too warm, and grey didn’t always have the shade we expected. After calibration, the error values dropped to around 2, and in many cases even below 1. This is certainly a level lower than the threshold of human perception. In other words, after correction, the colours finally "clicked" into place. Looking at the screen, we had the impression that the television had begun to speak with its full voice. Like an instrument that has finally been well tuned.

Thanks to the white balance adjustment, the C69KS's tendency to distort colours has been effectively limited, resulting in a very good final effect. After calibration, we will no longer see excessive warming of scenes in SDR or overly cool tones in HDR. However, it is worth noting the brightness characteristics. In SDR content, it is hard to have any objections – the image looks very good, especially in older films, television programmes, or materials from YouTube. It is significantly more challenging to evaluate the television's performance in HDR. Analysis of the EOTF curve suggests correct behaviour, but its practical variant reveals certain limitations. The C69KS can overly brighten the smallest elements of the frame, while at other times, it can dim the entire scene. Thus, calibration brought clear benefits in terms of colour quality, but certain limitations resulting from the local dimming operation and the way it is controlled by the C69KS cannot be overlooked, as we also saw in the C6K test.

The issue of the aforementioned colour banding can largely be mitigated thanks to the 'distortion reduction' feature, which is an algorithm for smoothing tonal transitions in Philips. It performs best at a low setting – effectively eliminating unwanted colour bands while not introducing strange artefacts or losing image detail. This is one of those features that is truly worth leaving switched on.

The situation is somewhat worse regarding upscaling. The image from a lower resolution can be too soft, while in some areas, characteristic 'jaggies' appear. The impression is that the algorithm is trying to reconcile two conflicting directions – smoothing and sharpening – and ultimately fails to find a happy medium. As a consolation, it can be added that the television has no issues with overscan, meaning it does not cut off the edges of the image, which sometimes occurs in other competing models.

The C69KS handles upscaling quite well. The tested 576p material looks surprisingly decent – a considerable amount of detail is retained, and the algorithm adds a slight "rounding" effect to sharp edges, making the image appear more cohesive. The performance in smoothing tonal transitions is less impressive. The television practically cannot improve them, leaving the image in a rather raw state. With older material, this can be quite tiring, as the lack of additional processing highlights any imperfections.

The issue of the matrix in the Philips OLED770 is not entirely straightforward. The manufacturer claims a 120 Hz panel, but our measurements showed that the screen can accept a 4K signal even at 144 Hz. That sounds like great news – after all, who wouldn't want an additional mode for PC gamers at this price? However, the reality turned out to be more complex. With 120 Hz content, the television behaves like most OLEDs – the image is absolutely clear, with no trace of ghosting or blurring, making it perfect for both dynamic games and sports broadcasts. The problem only arises at 144 Hz. Unlike models with official support for this frequency, here you can observe the phenomenon known as frame skipping. This means that the television cannot display all the frames – some are skipped, causing motion to lose smoothness, and double contours appear on the screen. The effect resembles the operation of the BFI function, which Philips does not offer in this model anyway.

C69KS offers a simplified motion enhancement panel in films, allowing the adjustment of effect intensity with a slider. This makes it easy to match fluidity to personal preferences. The ability to use higher refresh rates is also a plus – although the panel operates natively at 4K at 60 Hz, lowering the resolution to 1440p enables 120 and 144 Hz modes, both on consoles and PC. This sounds like great news, however, in practice, the image at these settings exhibits significant motion blur. The effect is so pronounced that the overall presentation appears merely average and loses its appeal for everyday use.

If someone is looking for a television for gaming, the Philips OLED770 is a contender that is hard to ignore. The mere fact that we have an OLED here provides an excellent starting point – perfect black and infinite contrast make evening sessions in atmospheric games look as if they were lifted straight from the cinema. On top of that, there is the Ambilight system, which consists of LEDs on the back of the television that extend the image onto the wall behind the screen. The effect is such that even playing FIFA can look like a small spectacle, and in horror games the atmosphere becomes truly thick. From a technical standpoint, it's also quite decent. The Philips OLED770 supports variable refresh rate (VRR) up to 120 Hz, has an automatic mode for gamers (ALLM), and if someone is using an Xbox Series X, they can also count on Dolby Vision support in games. One must only know that in this mode the input lag is slightly higher than standard, though still at an acceptable level. As a bonus, we get the “Game Bar” panel, which is a special tool bar for gamers. It isn’t the most conveniently designed solution, but it allows you to check key parameters without leaving the game. Overall, this results in a television that, on one hand, has all the essential gaming features, and on the other, can add something unique – Ambilight. And it is this mix of technology and visual effect that makes the OLED770 one of the better screens for gaming at home.

If we overlook the smudging and lack of native 4K at 120 Hz, the C69KS impresses with how well it performs during gaming. We get everything one can expect from a gaming television: variable refresh rate (VRR), automatic switching to game mode (ALLM), Dolby Vision Gaming mode, and a well-functioning HGiG. The television can also operate at 120 and even 144 Hz at lower resolutions, allowing for smoother gameplay on a console or PC. Additionally, there is a clear Game Bar that lets you quickly glance at key settings while gaming. As a result — despite a few limitations — the C69KS can be a really successful screen for gamers.