Philips OLED770 vs SHARP JP7765E

The Philips OLED770 does not attempt to compete with the brightest OLEDs on the market, and it would be difficult to expect that, as it is the entry-level model in Philips' range for 2025. In our measurements, it reached a maximum of around 700 nits, which allows enjoyment of HDR effects in scenes where light appears sporadically – for example, in the flash of headlights or a starry sky. In such moments, the image can truly be stunning. However, it is different when there are more bright elements on the screen. The television, like many cheaper OLEDs, limits luminance in those situations, causing the entire image to noticeably dim. This was best observed in a scene from the film The Meg, where the sun comes out behind an oil rig – the brightness then dropped to around 250 nits, which is almost three times less. The HDR effect remains pleasant to the eye, but it is worth being aware that this model performs best in scenes with less intense light. Fortunately, the OLED770 has a trump card – the coverage of the DCI-P3 colour gamut is as high as 99%, so colours in films and games are vivid and very close to what the creator intended to convey.

So how does the brightness of the Sharp JP7 fare in the most demanding titles? Honestly, at first, we were quite surprised. The television is capable of achieving over 1000 nits of brightness, which is an outstanding and rare result for a device costing just under 2000 PLN (for 55 inches). Watching bright, full-screen scenes, one might feel they are dealing with really good equipment. Unfortunately, though, we have to return to the problem we mentioned earlier regarding local dimming management. When small bright areas appear on a dark background (as in the test scenes from the films Life of Pi or Sicario 2), it is evident how poorly the JP7 handles zones. The television dims them almost to the maximum, crushing the entire HDR effect, which in such moments resembles a flat SDR image (less than 200 nits). This instability means that in demanding, contrast-heavy films, the image on the JP7 unfortunately loses its appeal.

As a consolation, it is worth noting that the panel has the potential for good colour display. It features a PFS (phosphor) filter, which allows for a solid 94% coverage of the DCI-P3 palette. The manufacturer calls its product a “QLED,” even though it is primarily based on the aforementioned PFS filter. Given the recent market battles of manufacturers over what may or may not be called QLED, we leave the question of the correctness of this naming to your assessment. However, it remains a fact that the potential for reproducing saturated colours in this panel is simply good.

The first measurements already show that the factory settings of the Philips OLED770 have quite a lot to improve even in Filmmaker mode. The white balance chart clearly shows a lack of blue, resulting in a slightly yellowish tint to the image. In practice, the white is not snowy but leans towards warmer tones – which some may even appreciate, but from the perspective of accuracy, this is a deviation from the norm. The gamma, on the other hand, tends to the darker side – the average value is around 2.6 instead of the reference 2.4. In the midtones, the image appears subdued and more saturated, which may seem too "filmic," but detracts somewhat from naturalness. However, the most issues are evident in colour reproduction. The average error is relatively high, and some colours – particularly shades of grey – deviate significantly from what one should see. In everyday viewing, this means that sometimes colours may look less natural than we would like.

When it comes to out-of-the-box colours, the Sharp JP7 was tested in Film mode, which traditionally offers the most consistent image compared to the yellowed “Eco” mode or the glaring blue of the “Dynamic” mode. Although this is the best choice among the available settings, the results are still far from ideal. The white balance clearly lacked red and blue components, causing many scenes to take on an unnatural greenish tint. Another issue was the gamma – during full-screen scenes, the television provides excessive brightness, which completely diminishes its cinematic character. All of this resulted in colour reproduction errors, especially in shades of grey, which exceeded a value of Delta E 10. For reference: errors above 2-3 are already visible to the human eye, so we are dealing with a significant distortion of reality here.

In HDR mode, the situation is reversed, but not any better. Here, the blue colour dominates the white balance, which gives the image an unnatural, almost “retail” sharpness, reminiscent of aggressive demonstration modes. Furthermore, measurements of the EOTF curve emphasise the retail character of the image. The graph clearly shows that the television generates an image significantly brighter than the standards predict, resulting in an artificially boosted and unrealistic final effect. The Sharp JP7 is evidently trying to appear stronger than it actually is, but it does so at the cost of fidelity to the content.

The Philips OLED770 from the outset signalled that it harboured significant potential, but in its factory settings, it was difficult to see this fully. The picture was often too warm, and some colours appeared to have lost their naturalness along the way. Calibration, however, revealed that it is a very responsive television – it reacted to every adjustment and almost immediately unveiled another layer of its capabilities. The white balance could be set in both SDR and HDR to eliminate the yellowish tint and introduce a neutral, clear white. The gamma stabilised closer to perfection, allowing midtones to regain their naturalness, and shadows stopped being artificially darkened, perhaps even with a slight brightening effect. The result was obvious... Films were watched with greater ease; the picture had cinematic depth, but without the feeling that something was exaggeratedly darkened. However, the most interesting aspect was the work on colours. Factory errors were not dramatic but slightly noticeable – skin tones were sometimes too warm, and grey didn’t always have the shade we expected. After calibration, the error values dropped to around 2, and in many cases even below 1. This is certainly a level lower than the threshold of human perception. In other words, after correction, the colours finally "clicked" into place. Looking at the screen, we had the impression that the television had begun to speak with its full voice. Like an instrument that has finally been well tuned.

We subjected the JP7 to our standard calibration procedure and really... the television gained a new lease of life thanks to it, particularly with SDR content (YouTube, classic television, series, or older films). As a result of our precise adjustment of the white balance and stabilisation of the gamma, colour errors fell to a value of below 3. This is a level at which the human eye has difficulty detecting distortions. In this scenario, the Sharp JP7 delivers an image with truly excellent colour precision, which is a significant advantage in this price class. However, content with HDR turned out to be much more problematic. Here, despite our efforts and interventions in the settings, the television simply would not cooperate. In the JP7 menu, we don't find any option that would allow for real control over brightness management (EOTF). Although a significant portion of the colour errors was reduced, the image still remained unnaturally oversaturated. It's a bit of a shame, as the potential of the mini-LED backlit panel is great, but the software presents a clear barrier here.

The conclusion is simple: when watching less demanding content (SDR) on the JP7, you can expect an image that is more than satisfactory, but in HDR, you must come to terms with a certain degree of "artificiality" that cannot be circumvented even with professional equipment.

The issue of the aforementioned colour banding can largely be mitigated thanks to the 'distortion reduction' feature, which is an algorithm for smoothing tonal transitions in Philips. It performs best at a low setting – effectively eliminating unwanted colour bands while not introducing strange artefacts or losing image detail. This is one of those features that is truly worth leaving switched on.

The situation is somewhat worse regarding upscaling. The image from a lower resolution can be too soft, while in some areas, characteristic 'jaggies' appear. The impression is that the algorithm is trying to reconcile two conflicting directions – smoothing and sharpening – and ultimately fails to find a happy medium. As a consolation, it can be added that the television has no issues with overscan, meaning it does not cut off the edges of the image, which sometimes occurs in other competing models.

In the case of lower quality materials and how the Sharp JP7 handles them, the situation is ambiguous. Let's start with the upscaling itself – here we have no major objections. The process of scaling the image to a higher resolution is correct; the picture remains readable and sharp, without the overscan effect, meaning no cropped edges. Of course, it is not at the level of top models, and at times one can notice slight jaggedness on the contours, but in this price range, the effect is fully acceptable.

However, the actual digital image processing performs significantly worse, which, apart from the upscaling, effectively does not exist. In the JP7 menu, we will not find any option that would effectively smooth out unwanted tonal transitions or reduce noise in the image. As a result, the signal reaches the panel in a very raw form, which, with heavily compressed materials (e.g. from YouTube), leads to visible posterisation. Either it is a flaw in the software or a very strange design decision, because in earlier Sharp models this function was available and, crucially, worked with noticeable effect. Here, we are left to deal with whatever the source provides us, without any digital support from the image processor.

The issue of the matrix in the Philips OLED770 is not entirely straightforward. The manufacturer claims a 120 Hz panel, but our measurements showed that the screen can accept a 4K signal even at 144 Hz. That sounds like great news – after all, who wouldn't want an additional mode for PC gamers at this price? However, the reality turned out to be more complex. With 120 Hz content, the television behaves like most OLEDs – the image is absolutely clear, with no trace of ghosting or blurring, making it perfect for both dynamic games and sports broadcasts. The problem only arises at 144 Hz. Unlike models with official support for this frequency, here you can observe the phenomenon known as frame skipping. This means that the television cannot display all the frames – some are skipped, causing motion to lose smoothness, and double contours appear on the screen. The effect resembles the operation of the BFI function, which Philips does not offer in this model anyway.

The motion fluidity on the Sharp JP7 is quite mediocre, and the reason is simple: the television uses a 60Hz panel. This instantly makes it difficult to recommend for watching sports or serious gaming, where higher refresh rates are already the standard. The only real plus is the presence of a smoothness feature, which we can control in films using a slider called De-judder. Lower settings provide a more raw, "cinematic" (framey) image, while higher settings add artificial smoothness. We suggest setting it somewhere in the middle of the scale, that is in the range of 3-5 – this is the best compromise to avoid the soap opera effect while also eliminating the tiring stuttering of the image. Interestingly, in the menu, we also find a "motion blur removal" slider, which usually indicates the presence of a 120Hz panel. However, with the JP7, it does not enhance the image at all and serves rather as a dummy – it is meant to look good in the settings, but technically it has no right to operate on this panel.

If someone is looking for a television for gaming, the Philips OLED770 is a contender that is hard to ignore. The mere fact that we have an OLED here provides an excellent starting point – perfect black and infinite contrast make evening sessions in atmospheric games look as if they were lifted straight from the cinema. On top of that, there is the Ambilight system, which consists of LEDs on the back of the television that extend the image onto the wall behind the screen. The effect is such that even playing FIFA can look like a small spectacle, and in horror games the atmosphere becomes truly thick. From a technical standpoint, it's also quite decent. The Philips OLED770 supports variable refresh rate (VRR) up to 120 Hz, has an automatic mode for gamers (ALLM), and if someone is using an Xbox Series X, they can also count on Dolby Vision support in games. One must only know that in this mode the input lag is slightly higher than standard, though still at an acceptable level. As a bonus, we get the “Game Bar” panel, which is a special tool bar for gamers. It isn’t the most conveniently designed solution, but it allows you to check key parameters without leaving the game. Overall, this results in a television that, on one hand, has all the essential gaming features, and on the other, can add something unique – Ambilight. And it is this mix of technology and visual effect that makes the OLED770 one of the better screens for gaming at home.

As we mentioned earlier, the 60Hz panel is not a feature that will attract gamers to the Sharp JP7. Perhaps for the casual player, whose console still generates most titles at 60 frames per second, there might be something interesting? When it comes to specific additions, we find here:

• ALLM Mode: Automatically switches the television to low latency game mode (input lag).

• Game Menu: Which is hard to call a full-fledged “Game Bar,” as the functionality here is minimal. Aside from enabling ALLM, there’s only a game-specific motion smoother which we recommend avoiding as it introduces very noticeable artifacts and worsens responsiveness.

• Dolby Vision Gaming: For Microsoft consoles.

Unfortunately, the list of shortcomings is significantly longer and more painful than the positives. The biggest disappointment is the lack of support for 120Hz, even when reducing the resolution to Full HD. The presence of 120Hz would allow for performance modes to be activated in many games on PS5 or Xbox Series X. Another shortcoming is VRR, which means that during frame drops, we are exposed to screen tearing. The lack of proper implementation of the HGiG standard is also very problematic. This results in the fact that during HDR calibration in the console menu, it is very easy to "overshoot" the brightness settings. As a result, instead of clear details in the highlights, we end up with an unnaturally over-bright image with cut-off details. Sharp JP7 is a proposition solely for very casual gamers.