Philips OLED770 vs Philips MLED920 / MLED910

The Philips OLED770 does not attempt to compete with the brightest OLEDs on the market, and it would be difficult to expect that, as it is the entry-level model in Philips' range for 2025. In our measurements, it reached a maximum of around 700 nits, which allows enjoyment of HDR effects in scenes where light appears sporadically – for example, in the flash of headlights or a starry sky. In such moments, the image can truly be stunning. However, it is different when there are more bright elements on the screen. The television, like many cheaper OLEDs, limits luminance in those situations, causing the entire image to noticeably dim. This was best observed in a scene from the film The Meg, where the sun comes out behind an oil rig – the brightness then dropped to around 250 nits, which is almost three times less. The HDR effect remains pleasant to the eye, but it is worth being aware that this model performs best in scenes with less intense light. Fortunately, the OLED770 has a trump card – the coverage of the DCI-P3 colour gamut is as high as 99%, so colours in films and games are vivid and very close to what the creator intended to convey.

Philips MLED920 in our measurements in static tests even reached around 900 nits, which is really a solid result for a mid-range model. In practice, this translates to a lot of satisfaction during viewing sessions – in scenes rich in bright light, such as the first, third or fifth test slide, the screen managed to generate about 700 nits, which is sufficient to feel the true "HDR effect." However, it cannot be denied that the limited number of dimming zones and the compromises typical of mini-LEDs in more demanding scenes reveal their nature. In sequences with small light sources – like the moon or a scene from the film Sicario 2 – the television clearly prioritises maintaining deeper blacks at the expense of the brightness of these small elements. For most viewers, this is still a reasonable compromise, as the dark background looks significantly better, though it is important to be aware that the details themselves may not impress with their intensity. There is also a certain sense of dissatisfaction regarding the colours. Although the applied PFS filter (the equivalent of quantum dots known from QLEDs) does its job and the colours appear quite vivid, the coverage of the DCI-P3 palette reaches “only” 90%. In everyday viewing, this will be sufficient, but in extremely colourful productions – like the latest Disney animations – one can notice that some tones are not as vibrant as they could be in other setups.

The first measurements already show that the factory settings of the Philips OLED770 have quite a lot to improve even in Filmmaker mode. The white balance chart clearly shows a lack of blue, resulting in a slightly yellowish tint to the image. In practice, the white is not snowy but leans towards warmer tones – which some may even appreciate, but from the perspective of accuracy, this is a deviation from the norm. The gamma, on the other hand, tends to the darker side – the average value is around 2.6 instead of the reference 2.4. In the midtones, the image appears subdued and more saturated, which may seem too "filmic," but detracts somewhat from naturalness. However, the most issues are evident in colour reproduction. The average error is relatively high, and some colours – particularly shades of grey – deviate significantly from what one should see. In everyday viewing, this means that sometimes colours may look less natural than we would like.

Like every Philips television we tested, we primarily assessed the MLED920 in Filmmaker mode – this is meant to be the "most honest" mode, designed for films and to faithfully convey the intentions of the creators. Indeed, in terms of colour reproduction, it performs the best among all the modes available on the television, but it is not without flaws. The first thing that catches the eye is the white balance. The image has a slight tendency towards purple-pink tones, which gives it a somewhat unnatural character. An even bigger problem, however, turned out to be what we mentioned earlier – image blooming. Just looking at the gamma or EOTF charts reveals that the line significantly deviates from the norm, dropping below a value of 1.8. In practice, this means "bleeding" of the brightest whites, where the image becomes almost milky. Fortunately, most of these issues can be corrected – the MLED920 responds well to calibration, and with a few adjustments, one can significantly improve the viewing experience.

The Philips OLED770 from the outset signalled that it harboured significant potential, but in its factory settings, it was difficult to see this fully. The picture was often too warm, and some colours appeared to have lost their naturalness along the way. Calibration, however, revealed that it is a very responsive television – it reacted to every adjustment and almost immediately unveiled another layer of its capabilities. The white balance could be set in both SDR and HDR to eliminate the yellowish tint and introduce a neutral, clear white. The gamma stabilised closer to perfection, allowing midtones to regain their naturalness, and shadows stopped being artificially darkened, perhaps even with a slight brightening effect. The result was obvious... Films were watched with greater ease; the picture had cinematic depth, but without the feeling that something was exaggeratedly darkened. However, the most interesting aspect was the work on colours. Factory errors were not dramatic but slightly noticeable – skin tones were sometimes too warm, and grey didn’t always have the shade we expected. After calibration, the error values dropped to around 2, and in many cases even below 1. This is certainly a level lower than the threshold of human perception. In other words, after correction, the colours finally "clicked" into place. Looking at the screen, we had the impression that the television had begun to speak with its full voice. Like an instrument that has finally been well tuned.

After calibration, we managed to largely tame the white balance – to the extent that the average viewer will not be able to detect distortions in colours. The characteristic pink-purple haze that previously disrupted the naturalness of the image has also disappeared. The colour palette has been organised, and the colours appear more coherent and neutral. The gamma in SDR content post-calibration looks really good – there is no longer any mention of the previous 'bleeding' effect in bright scenes. The image has become more contrasty and devoid of that milkiness which had previously greatly harmed the viewing experience. In the case of HDR content, the improvement is also noticeable, although here it is still evident that the television is going 'its own way'. The EOTF curve cannot be fully shaped, as Philips simply does not offer the tools to allow precise control over this parameter in its settings. In many films, the television still exposes the image 'in its own way'. Despite these limitations, the calibration has delivered quite a bit of good – most of the colour distortions have been minimised, and the overall balance of the image has significantly improved. However, it must be noted that certain barriers stem from the very design of the hardware and simply cannot be overcome.

The issue of the aforementioned colour banding can largely be mitigated thanks to the 'distortion reduction' feature, which is an algorithm for smoothing tonal transitions in Philips. It performs best at a low setting – effectively eliminating unwanted colour bands while not introducing strange artefacts or losing image detail. This is one of those features that is truly worth leaving switched on.

The situation is somewhat worse regarding upscaling. The image from a lower resolution can be too soft, while in some areas, characteristic 'jaggies' appear. The impression is that the algorithm is trying to reconcile two conflicting directions – smoothing and sharpening – and ultimately fails to find a happy medium. As a consolation, it can be added that the television has no issues with overscan, meaning it does not cut off the edges of the image, which sometimes occurs in other competing models.

The manufacturer has equipped this model with several features that improve signal quality, and although we usually approach such "enhancements" with caution, here they prove to be really helpful. The key option is called "distortion reduction" – it works best at a medium level, as on one hand it effectively smooths out unwanted stair-stepping and colour banding, while on the other it does not excessively cut out details, allowing the image to still look natural.

Things are a bit worse with upscaling. Lower quality materials – such as the test video with the model – appeared soft and lacking in sharpness. Indeed, it can be partially corrected with the sharpness slider in the menu, but the effect remains far from what competitors in a similar price range offer. Philips therefore still needs to work on this element, as compared to the successful improvement of tonal transitions, the upscaling simply falls short.

The issue of the matrix in the Philips OLED770 is not entirely straightforward. The manufacturer claims a 120 Hz panel, but our measurements showed that the screen can accept a 4K signal even at 144 Hz. That sounds like great news – after all, who wouldn't want an additional mode for PC gamers at this price? However, the reality turned out to be more complex. With 120 Hz content, the television behaves like most OLEDs – the image is absolutely clear, with no trace of ghosting or blurring, making it perfect for both dynamic games and sports broadcasts. The problem only arises at 144 Hz. Unlike models with official support for this frequency, here you can observe the phenomenon known as frame skipping. This means that the television cannot display all the frames – some are skipped, causing motion to lose smoothness, and double contours appear on the screen. The effect resembles the operation of the BFI function, which Philips does not offer in this model anyway.

The Philips MLED920 features a 144 Hz panel, which immediately suggests that we shouldn't complain about motion smoothness. And indeed – the motion blur is relatively low for a VA panel, and although slight issues can sometimes be noticed on darker backgrounds, they are not something that would stand out to most people during regular viewing.

Another significant advantage is the presence of a motion smoother called “Motion Style.” It allows you to adjust the sensation of smoothness to your own preferences – if someone prefers a more “theatrical,” almost television-like image, they can increase the sliders, whereas if they prefer to maintain the natural “jumps” of cinematic frames, it’s enough to set lower values. This way, everyone can find their golden mean.

If someone is looking for a television for gaming, the Philips OLED770 is a contender that is hard to ignore. The mere fact that we have an OLED here provides an excellent starting point – perfect black and infinite contrast make evening sessions in atmospheric games look as if they were lifted straight from the cinema. On top of that, there is the Ambilight system, which consists of LEDs on the back of the television that extend the image onto the wall behind the screen. The effect is such that even playing FIFA can look like a small spectacle, and in horror games the atmosphere becomes truly thick. From a technical standpoint, it's also quite decent. The Philips OLED770 supports variable refresh rate (VRR) up to 120 Hz, has an automatic mode for gamers (ALLM), and if someone is using an Xbox Series X, they can also count on Dolby Vision support in games. One must only know that in this mode the input lag is slightly higher than standard, though still at an acceptable level. As a bonus, we get the “Game Bar” panel, which is a special tool bar for gamers. It isn’t the most conveniently designed solution, but it allows you to check key parameters without leaving the game. Overall, this results in a television that, on one hand, has all the essential gaming features, and on the other, can add something unique – Ambilight. And it is this mix of technology and visual effect that makes the OLED770 one of the better screens for gaming at home.

For gamers, the Philips MLED920 is truly a complete tool. The manufacturer has taken care of everything that is considered standard in televisions designed for consoles and PCs today. It features ALLM, so the console automatically switches the screen to game mode, alongside VRR and a refresh rate of 144 Hz, which guarantees smooth gameplay even in fast-paced titles. All key HDR formats are supported – including HGiG and Dolby Vision Gaming for Xbox – which means that regardless of what you are playing and on which console, the television will be able to extract the maximum potential from the image. The Game Bar also proves useful in daily gaming – a relatively simple implementation by Philips, but a functional panel where you can quickly check image parameters, enable VRR or adjust settings without leaving the game. It may not be as comprehensive as the competition, but it performs its task flawlessly. And finally, something that sets Philips apart from the competition – Ambilight. The three-sided LED backlighting can create a huge impression in games, especially in the evening. It's also a way to slightly 'extend' the screen and enhance the feeling of immersion. And as colourful LEDs have recently become almost a mandatory element of a gamer’s room, the MLED920 fits into this trend perfectly.