Philips MLED920 / MLED910 vs PHILIPS PUS9010 (IPS)

Philips MLED920 in our measurements in static tests even reached around 900 nits, which is really a solid result for a mid-range model. In practice, this translates to a lot of satisfaction during viewing sessions – in scenes rich in bright light, such as the first, third or fifth test slide, the screen managed to generate about 700 nits, which is sufficient to feel the true "HDR effect." However, it cannot be denied that the limited number of dimming zones and the compromises typical of mini-LEDs in more demanding scenes reveal their nature. In sequences with small light sources – like the moon or a scene from the film Sicario 2 – the television clearly prioritises maintaining deeper blacks at the expense of the brightness of these small elements. For most viewers, this is still a reasonable compromise, as the dark background looks significantly better, though it is important to be aware that the details themselves may not impress with their intensity. There is also a certain sense of dissatisfaction regarding the colours. Although the applied PFS filter (the equivalent of quantum dots known from QLEDs) does its job and the colours appear quite vivid, the coverage of the DCI-P3 palette reaches “only” 90%. In everyday viewing, this will be sufficient, but in extremely colourful productions – like the latest Disney animations – one can notice that some tones are not as vibrant as they could be in other setups.

In the Philips PUS9010 version with an IPS panel, the HDR brightness unfortunately performs worse than in the previously tested 55-inch model with a VA panel. The difference reaches about 100 nits, which is quite noticeable given the relatively low values. While the VA version could exceed 500 nits, here the maximum brightness is around 400 nits. This level still allows for watching movies and series in HDR, especially on streaming platforms, but the effects are clearly muted. Bright elements do not have the same impact, and scenes requiring high luminance appear less impressive. On the positive side, the coverage of the DCI-P3 colour gamut is commendable. The IPS version offers around 91%, which is about 5% more than the variant with a VA panel. This translates to somewhat better colour saturation in HDR content, despite the lower brightness. Colours can appear more vibrant and cohesive, especially in colourful scenes.

Like every Philips television we tested, we primarily assessed the MLED920 in Filmmaker mode – this is meant to be the "most honest" mode, designed for films and to faithfully convey the intentions of the creators. Indeed, in terms of colour reproduction, it performs the best among all the modes available on the television, but it is not without flaws. The first thing that catches the eye is the white balance. The image has a slight tendency towards purple-pink tones, which gives it a somewhat unnatural character. An even bigger problem, however, turned out to be what we mentioned earlier – image blooming. Just looking at the gamma or EOTF charts reveals that the line significantly deviates from the norm, dropping below a value of 1.8. In practice, this means "bleeding" of the brightest whites, where the image becomes almost milky. Fortunately, most of these issues can be corrected – the MLED920 responds well to calibration, and with a few adjustments, one can significantly improve the viewing experience.

We assessed the colour reproduction, as always, on the factory settings, focusing on the movie mode, which for Philips usually provides the best starting point. This is also a good moment to demonstrate how much the same TV model can vary depending on the type of panel used. Looking at the white balance, the overall tendency remains similar to the variant with the VA panel. Excessive red in the whites is still noticeable, but in the tested unit with an IPS panel, there are also deficits in the blue channel. As a result, the image has a slightly different colour character, which can be clearly seen in the comparative materials. This is a very good example illustrating why ready-made settings downloaded from the internet do not always work even within the same model.

However, returning to the assessment itself, this unit performs quite well, especially with SDR content. Colour tests show correct saturation and consistency, with no glaring errors that could interfere with everyday viewing. In HDR materials, slight deficits in reds can already be noticed, but these are not flaws that spoil the overall perception of the image. The biggest limitations do not come directly from the colours, but rather from the white and black levels. The use of an IPS panel and slightly lowered gamma results in the image being slightly boosted in brightness, and the poor black levels further affect the perceived contrast. This makes the overall picture look brighter, but at the same time it loses depth, especially during evening viewing.

After calibration, we managed to largely tame the white balance – to the extent that the average viewer will not be able to detect distortions in colours. The characteristic pink-purple haze that previously disrupted the naturalness of the image has also disappeared. The colour palette has been organised, and the colours appear more coherent and neutral. The gamma in SDR content post-calibration looks really good – there is no longer any mention of the previous 'bleeding' effect in bright scenes. The image has become more contrasty and devoid of that milkiness which had previously greatly harmed the viewing experience. In the case of HDR content, the improvement is also noticeable, although here it is still evident that the television is going 'its own way'. The EOTF curve cannot be fully shaped, as Philips simply does not offer the tools to allow precise control over this parameter in its settings. In many films, the television still exposes the image 'in its own way'. Despite these limitations, the calibration has delivered quite a bit of good – most of the colour distortions have been minimised, and the overall balance of the image has significantly improved. However, it must be noted that certain barriers stem from the very design of the hardware and simply cannot be overcome.

After calibration, the picture was brought to a truly sensible level. The overall look is coherent and natural, and when it comes to colour reproduction, it is difficult to unequivocally state whether we are dealing with a VA or IPS panel. This is a good sign, showing that the television has a solid foundation for further adjustments. It is worth noting the larger colour gamut coverage in this variant, which can subtly enhance the perception of colourful scenes, particularly in HDR content. However, this advantage is largely balanced out by the boosted black levels resulting from the use of an IPS panel. The limited black depth affects the perceived contrast, especially when watching in a dark room. Consequently, despite the noticeable improvement after calibration, the final assessment remains the same as in the variant with the VA panel. Better colours are unable to fully compensate for the weaker black levels.

The manufacturer has equipped this model with several features that improve signal quality, and although we usually approach such "enhancements" with caution, here they prove to be really helpful. The key option is called "distortion reduction" – it works best at a medium level, as on one hand it effectively smooths out unwanted stair-stepping and colour banding, while on the other it does not excessively cut out details, allowing the image to still look natural.

Things are a bit worse with upscaling. Lower quality materials – such as the test video with the model – appeared soft and lacking in sharpness. Indeed, it can be partially corrected with the sharpness slider in the menu, but the effect remains far from what competitors in a similar price range offer. Philips therefore still needs to work on this element, as compared to the successful improvement of tonal transitions, the upscaling simply falls short.

In the Philips PUS9010, we find another iteration of the P5 Perfect Picture image processor, designed to improve the quality of inferior materials. One of the components of this system is the distortion reduction function, which is responsible for smoothing tonal transitions. It works effectively and indeed reduces the visible colour gradation. Unfortunately, it does so quite aggressively. In practice, it can dim details such as the texture of materials or film grain. This is a notable compromise, so we would not recommend it for movie screenings. However, it performs significantly better with more casual content like YouTube or regular television. The P5 processor also manages quite well with lower resolution materials. The image is soft, at times even too soft, but this can easily be corrected with the sharpness slider, adjusting the effect to personal preference. A positive aspect is also the lack of edge trimming in SD materials, which is still not standard in this class of televisions.

The Philips MLED920 features a 144 Hz panel, which immediately suggests that we shouldn't complain about motion smoothness. And indeed – the motion blur is relatively low for a VA panel, and although slight issues can sometimes be noticed on darker backgrounds, they are not something that would stand out to most people during regular viewing.

Another significant advantage is the presence of a motion smoother called “Motion Style.” It allows you to adjust the sensation of smoothness to your own preferences – if someone prefers a more “theatrical,” almost television-like image, they can increase the sliders, whereas if they prefer to maintain the natural “jumps” of cinematic frames, it’s enough to set lower values. This way, everyone can find their golden mean.

Philips PUS9010 has a 4K panel with a refresh rate of 144 Hz, which will be appreciated primarily by sports fans and gamers. This is especially evident in dynamic scenes where the motion is sharp, and annoying blur is almost non-existent. When it comes to movies (standard 24 fps), Philips gives us a proven set of settings known from higher series. Two sliders are used to control motion. “Smoothness” allows you to adjust the image to your own taste: at low settings, we maintain a cinematic character, while moving the slider to the right gives us a perfectly smooth, albeit somewhat “theatrical” effect. On the other hand, “Motion Blur Reduction” is a function designed for sports – it ensures that fast-moving objects do not lose detail and remain clear.

For gamers, the Philips MLED920 is truly a complete tool. The manufacturer has taken care of everything that is considered standard in televisions designed for consoles and PCs today. It features ALLM, so the console automatically switches the screen to game mode, alongside VRR and a refresh rate of 144 Hz, which guarantees smooth gameplay even in fast-paced titles. All key HDR formats are supported – including HGiG and Dolby Vision Gaming for Xbox – which means that regardless of what you are playing and on which console, the television will be able to extract the maximum potential from the image. The Game Bar also proves useful in daily gaming – a relatively simple implementation by Philips, but a functional panel where you can quickly check image parameters, enable VRR or adjust settings without leaving the game. It may not be as comprehensive as the competition, but it performs its task flawlessly. And finally, something that sets Philips apart from the competition – Ambilight. The three-sided LED backlighting can create a huge impression in games, especially in the evening. It's also a way to slightly 'extend' the screen and enhance the feeling of immersion. And as colourful LEDs have recently become almost a mandatory element of a gamer’s room, the MLED920 fits into this trend perfectly.

The Philips PUS9010 is a truly solid machine for gaming. It has everything that matters: VRR, automatic game mode (ALLM), and support for HGiG. The latter is a great feature – it allows HDR in games to be set exactly as the developers envisioned. The television handles 120 Hz refresh rates effortlessly at every popular resolution (1080p, 1440p, and 4K). Whether you connect a PS5, Xbox, or a powerful PC, everything functions stably and simply as it should. Gamers will also appreciate the Game Bar. This quick, clear menu immediately shows whether the low latency mode is active. This is especially useful when frequently switching between different consoles. The whole experience is complemented by Ambilight. Evening sessions with this backlighting take the atmosphere to a whole new level – the image seems larger, and dynamic scenes leave an even better impression. Even if someone isn’t a fan of such “gadgets”, it’s hard to deny that it’s impressive.