LG OLED G6 (G64LW, G66LS) vs TCL X11L

The LG G6 is currently one of the brightest OLEDs on the market. Its peak brightness reaches nearly 2500 nits, and what’s best – this has a direct impact on real film scenes. The television flawlessly extracts details in the bright areas of the image. And this is regardless of whether we are talking about very small points like stars in the sky or slightly larger elements on the screen. Naturally, with full-screen, uniformly white scenes, the brightness of the G6 decreases due to the panel protection system (ABL). However, in real, varied cinematic shots, this value still hovers around 2000 nits, which can be considered an outstanding result. The coverage of the colour palette also deserves praise. The new second-generation Tandem OLED panel only brought a cosmetic change but still an improvement. The coverage of the DCI-P3 palette reaches nearly 99.5%, whereas for the ultra-wide BT.2020, it is around 84%. These are very good results, although it’s worth remembering one thing: at extremely high brightness levels, the colour volume will be lower than in Samsung Display’s QD-OLED panels due to the use of a white sub-pixel (WOLED). However, in everyday content and most films, catching this difference will be very difficult.

Such a large number of zones did not only result in deep, inky blacks, but also in screen brightness. The X11L is an extremely bright television. Peak brightness can easily exceed 4,000 nits, and with the special "Boost" mode active it can, in specific conditions, even reach marketing figures around 9,000 to 10,000 nits. It is undoubtedly one of the brightest, if not the brightest, screens on the market. So how do these numbers relate to real film measurements? The results are very good, though of course far from the marketing claims. The brightness we measured in real film scenes was around 2,000 to 3,000 nits. That is an excellent result, given that the vast majority of content available is recorded and produced for those brightness levels, even the rare material mastered to 4,000 nits. But it also clearly shows that the figures the manufacturer touts do not always translate directly to the video material you have at home. The only "quirk" (if you can call it that) is that when very small, bright elements appear on screen, their brightness falls below 2,000 nits. The dimming algorithm does this deliberately to preserve deep blacks and minimise halo. This is entirely understandable, and the effect is still very impressive, but it also shows that even with such powerful hardware, Mini-LED technology has its limits and does not always work without compromise. In HDR itself, brightness is not the only thing that matters; colour saturation and the colours themselves do too. On the X11L these are very good thanks to the new Super QLED (SQD) quantum dots. The application of a new coating filter has delivered excellent results in covering the P3 colour gamut and the ultra-wide BT.2020. Although it does not reach the promised 100% of BT.2020, figures around 89 to 90% can be considered excellent. Colours are not far off those of RGB Mini-LED screens. We can even say they are more stable, due to a less demanding algorithm that RGB screens often struggle with.

We tested the LG G6 in the best factory mode in terms of colour fidelity, namely FILMMAKER MODE. In the case of our test unit, this mode was quite well tuned straight out of the box. In SDR content, the only issue we could point out was the white balance, which tended to drift towards warmer tones. Consequently, the image could occasionally appear slightly yellowed; however, overall, this was not an bothersome problem. The G6 performed a bit worse with HDR content. There, we noted too much blue component in the white balance, which caused the image to take on cooler hues, resulting in fairly noticeable errors. As can be seen in our ColorChecker chart, the colours indeed drifted towards these cooler registers. Nevertheless, considering the factory settings, the television displayed a perfectly decent level. We do know, however, that OLED screens – particularly those from LG – respond excellently to professional calibration, which is why we immediately went ahead with it.

Turning on what should theoretically be the best Filmmaker Mode, you expect a one-to-one image of what the director saw. On the X11L it's fairly good, but this mode has obvious faults, which our measurements immediately exposed. Let's start with SDR. Both the white balance and the gamma are simply misaligned. The whites contain too much blue and red, giving the screen a slight pink tint. That also affected the gamma, which instead of holding the cinematic 2.4 drifts closer to 2.2. What did that result in? The whole image is therefore more pushed and looks artificially brighter. The worst comes at the end, namely the HDR measurements. Apart from this slight white-balance shift, the X11L fails on the brightness-management curve, the so-called EOTF. What we saw in the measurements immediately explains what we noticed earlier in films. The image is unnaturally brightened because the curve is massively overshot above the reference. The TV simply blatantly lifts the dark parts of the picture to create a "wow" effect, completely ignoring the director's intent.

After professional calibration, we gained complete control over the panel, and we managed to align all parameters to nearly zero. We successfully calibrated the white balance perfectly, which eliminated the factory cool and warm tints from the screen. The effects are clear as day in the ColorChecker test – the average colour reproduction errors dropped below the critical value of 1-2. And what does that mean? PERFECT colours, without any distortion! However, as reviewers, we must point out here how the LG G6 arbitrarily manipulates brightness, for which the EOTF curve is responsible. When looking at the standard synthetic chart, it might seem that the line is quite straight. However, the situation changes when we turn on the measurement filter, which shows how the television interprets brightness in real, moving film scenes (EOTF in MOVIES). Then it becomes evident that some of the tiniest parts on the screen are slightly over-brightened by the algorithm. Of course, for the average viewer, such a deviation will be practically unnoticeable, but in the test of such an expensive screen, it is worth noting – especially since we are talking about a model that has huge aspirations to be named the best television of the year.

After professional calibration we primarily managed to fully tame the SDR signal. Here the X11L responded perfectly to our adjustments. We were able to completely correct the white balance, remove that pink tint and set gamma to a stable 2.4. After that the picture finally became consistent with the director's vision, natural and free of artificial boosts. We also made minimal tweaks to HDR, but the TV's biggest flaw remained unchanged. It's of course about how the X11L manages its brightness and how much it overshoots the EOTF curve. Unfortunately, TCL provides virtually no tools to adjust this parameter. Even during professional calibration the software offers no way to rein in this curve, so the TV will always tend to brighten the image in HDR on its own.

Whatever one may say about the G6’s problems with near-black signal, it must be fairly acknowledged that it handles heavily compressed material and lower resolution content exceptionally well. All unwanted, unsightly tonal transitions are effectively reduced here by the "Smooth Gradation" feature. At the "Low" setting, the algorithm works flawlessly – effectively masking the artefacts resulting from strong compression without destroying the sharpness and details in the frame. Higher levels of this function do indeed smooth the image further, but they start to blur the real elements of object texture, which is why we recommend keeping this slider at a low setting. As for the upscaling to 4K, the processor does an excellent job – edge sharpness and detail reconstruction are at the highest level, and in this regard, the G6 does not fall behind the world leaders at all.

Much like the C8L model we tested earlier, TCL has delivered a substantial upgrade in its flagship X series. It's all thanks to the MediaTek Pentonic 800 processor used in this model. Thanks to it, features for smoothing tonal transitions and even upscaling content to higher resolutions finally look as they should. The biggest Achilles' heel of previous TCL models has at last been addressed. The processor handles digital processing superbly and, in this respect, the TV no longer lags behind flagship models from Korea or even the most refined ones from Japan.

LG G6 is an OLED television, so in the category of motion fluidity, it traditionally deserves the highest marks. The television supports very high refresh rates reaching up to 165 Hz in 4K resolution, but most importantly – on the screen, you will not notice any signs of blurring. The response time of the panel is almost instantaneous, ensuring that dynamic images remain perfectly sharp.

From a specification standpoint the X11L can impress, supporting refresh rates up to 144 Hz at 4K, and it can be pushed to as much as 288 Hz in Full HD. However, from a real-world usage perspective we were most interested in how the screen performs at 120 Hz. After all, that is the limit for today’s hardware, with current-generation consoles leading the way. How does that look in practice? Even though it uses a VA panel, the screen does not exhibit significant smearing. With very fast-moving objects you can notice a slight trailing, but it is subtle enough that it hardly stands out while gaming or watching sport. The motion smoothing feature called "Motion Clarity" is also very useful here, allowing you to adjust motion smoothness to your preference. Recommended settings can be found in the picture.

The LG G6 is a true monster for gamers and one of the best-equipped televisions on the market in this regard. The manufacturer has not skimped on features, equipping this model with as many as four full HDMI 2.1 ports with a maximum bandwidth of 48 Gbps. This means that no matter which port you plug in your PlayStation 5, Xbox Series X, or powerful PC, you will get the absolute maximum performance from them.

The television supports a full set of gaming technologies: from VRR (Variable Refresh Rate) to AMD FreeSync Premium Pro, and even Nvidia G-Sync Compatible. On top of that, it offers remarkably low, nearly imperceptible input lag and an exceptionally well-functioning Game Optimizer panel, which allows you to monitor signal parameters in real time. Gaming on this screen, with the perfect black of OLED and impressive refresh rates, is pure pleasure.

For gamers the X11L is simply a superb screen. TCL has already accustomed us to the fact that it packs virtually every available feature into its products, and the flagship from the X series is no different. Thanks to the new processor, the X11L has as many as four HDMI 2.1 ports with full 48 Gbps bandwidth. Naturally, HDMI 2.1 brings a set of very useful features, such as Auto Low Latency Mode (ALLM) and VRR frame synchronisation, covering the full refresh range up to 288 Hz. All these features can be conveniently controlled from the dedicated Game Bar. Interestingly, its appearance can be customised to your taste; there are three preset themes to choose from, directly referencing the Nintendo, PlayStation and Xbox consoles. And speaking of Xbox, the X11L also supports Dolby Vision Gaming without any issues.

When gaming in the standard HDR10 format, however, you need to bear in mind the specific tuning of the brightness curve, which can prove troublesome during initial setup. Although the TV supports HGiG, configuring everything via the PlayStation or Xbox system menu can be difficult. The screen’s algorithms tend to artificially brighten the test checkerboard pattern, making it really hard to hit the correct white clipping point by eye. For HDR10 to look correct, we suggest manually setting the console brightness in the console menu to around 2,500–3,000 nits.