LG OLED C6 (WOLED) vs Philips PQS9011 / PQS9001 (The One 2026)

The HDR performance of the LG C6 is really very good. LG Display's new WOLED panel has primarily brought a considerable increase in brightness. In our unit we measured around 1,500 nits and, importantly, the TV can deliver similar values in many typical film scenes. That gives the HDR the necessary impact. Bright highlights, lamps and sunlight can be really intense, and most HDR films simply look very impressive. Of course it's still an OLED, so brightness falls in scenes with a lot of white. This is well illustrated by the fifth scene in the film The Meg, where the C6 reached around 600 to 700 nits. That's still a very good result, but it also shows that the new panel hasn't shed all the limitations typical of OLEDs.

Colours

When it comes to colours, there is also little to complain about. The C6 covers about 99% of the DCI-P3 gamut and roughly 75% of BT.2020. In practice the colours are very saturated and, importantly, stable across different scenes. This is worth emphasising, because not every TV behaves the same in this respect. In some RGB Mini LED models colour saturation can depend more strongly on image brightness. A wider colour palette is nowadays offered mainly by QD-OLED TVs and new SQD models with a new generation of quantum dots. However, the C6 still performs very strongly here and is able to produce suitably saturated colours in most film scenes.

Philips PQS9000 is a moderately bright TV. In our HDR scenes it reached roughly 450 to just over 500 nits. That's enough to notice a difference compared with SDR. Reflections of the sun, lamps or flares have a bit more sparkle than on basic TVs, whose brightness often tops out around 300 nits. However, it is not a level at which bright elements make a particularly strong impression. The biggest limitation remains contrast. Without local dimming, when the TV brightens a bright object it also raises the black level around it. There is therefore no clear separation of strong highlights from a dark background, and it is that contrast that can show what HDR can do. The PQS9000 offers more than the cheapest models, but despite decent brightness the effect remains fairly basic.

Colours

Philips deserves praise for the colours. Although the manufacturer calls this model QLED, in reality a PFS phosphor is used here instead of quantum dots. That choice does not prevent the TV from achieving good results. On both test patterns and in measurements of film scenes we recorded about 94% coverage of DCI-P3 and 75% of BT.2020. For this class of TV that is really good. In practice this means that the vast majority of colours used in HDR films and series will have appropriate saturation. Vibrant green or intense red are not much of an issue and add appeal to the picture. Limitations are easier to notice in some games and in rarer content that use the most saturated shades of the wide BT.2020 gamut. In such situations, displays with wider colour coverage, such as SQD or RGB LED, can show more. In its price bracket, however, the PQS9000 has nothing to be ashamed of.

Right out of the box the LG C6 is pretty well set up, especially if you choose Filmmaker mode. In SDR material the white balance is decent, although as brightness increases it starts to lack a bit of red. The picture becomes a little cooler as a result, but it’s not such a big difference that it stands out during normal viewing. More happens in the brightness response itself. Gamma is a bit low and instead of holding at 2.4 it sits closer to 2.1–2.2 over much of the range. In practice the C6 slightly brightens midtones. Shadows are therefore more readable, but the image loses some depth compared with how it should look in a dark room. In HDR the situation is a bit more interesting. The start of the grayscale looks very good, but from about 20–30% brightness the white balance starts to drift more and more. As brightness rises there’s more red and a noticeable lack of blue. In the brightest highlights the difference is already significant and also affects reproduction of some colors. The EOTF curve itself is handled fairly well over most of the range. The C6 only has a tendency to slightly brighten the image, which we also saw during our film comparisons. The largest deviation appears around the brightest highlights, where the TV begins to adapt the signal to the panel’s capabilities. So the out-of-the-box Filmmaker mode in HDR isn’t perfect, but overall it performs well. The biggest room for improvement is the white balance, especially at high brightness.

Unfortunately, the factory picture settings for Film mode on the PQS9000 need refinement. In SDR the most noticeable problem is an excess of red in the white balance, which makes whites, greys and skin tones too warm, sometimes even slightly pinkish. On top of that the gamma runs below the reference across most of the range. The TV therefore brightens midtones and highlights, making the overall image look flatter than it should.

In HDR the white balance itself is much better. Apart from minor deviations the RGB components track closely, so there is no pronounced colour cast as in SDR. However, the EOTF curve shows a slight brightening of parts of the image, and the biggest issue appears in measurements of the wide colour gamut. Many hues deviate significantly from the target, with errors reaching levels of 8–9. The good gamut coverage we praised earlier therefore does not mean the TV hits specific colours equally well. It can display a wide colour range, but out of the box it does not use it very precisely.

LG TVs have been very receptive to calibration for years and the C6 is no exception. After adjustment the white balance was set almost perfectly, and most colour errors dropped to values below 3, often even around 2. In practice this means very accurate colour reproduction, both in SDR and HDR. An interesting quirk only appeared with the luminance response in HDR. On a standard EOTF chart everything looks almost ideal and at first glance it would be hard to criticise. Only when we measured the TV's behaviour with filters based on actual film scenes did it become clear that the C6 has a slight tendency to artificially boost image brightness.

This is not a huge difference and many people may even view it positively, because HDR consequently looks a little more striking. From the perspective of fidelity to the source material this is not ideal, however, as some scenes are simply a touch brighter than the filmmaker intended. Interestingly, this is rather unusual for LG. In previous generations the brand's TVs typically stuck very closely to the reference picture characteristic after calibration. With the C6 we are still very close to the standard, but this subtle brightness boost is indeed noticeable in films and TV series.

Calibration brought a significant improvement, especially in SDR material. We managed to even out the white balance and remove the previous colour cast, and the Color Checker measurements now look really very good. Colours are much closer to what should be on screen, so with ordinary TV or SDR films we can be satisfied with the outcome. Unfortunately HDR somewhat spoils that result. On the one hand it is limited by the panel itself, because calibration won't improve contrast or replace local dimming. On the other hand there remain colour errors that we couldn't correct because the CMS settings, that is the colour management controls, were greyed out and inactive. That costs Philips points with us. The white balance can be fine‑tuned, but without access to wide‑gamut adjustments it's not possible to order HDR colours equally well. It's a shame, because the SDR results show the potential is there, but we weren't allowed to make full use of it everywhere.

Here the LG C6 has taken a real step forward. The TV uses the same processor found in the flagship G6, and in terms of image processing the two models are very similar. That's a considerable plus, because in this area LG's processor this year performs excellently. The "Smooth Gradation" function in particular works very well. With heavily compressed material it can effectively hide ugly banding and artefacts that often appear, for example, in lower-quality streaming. It's best to leave it set to "Low". That way the improvement is clear and the TV does not yet start blurring fine details. Higher settings smooth the image more aggressively but can already remove some of the natural texture of objects on the screen. Upscaling itself also performs very well. Lower-resolution content is sharpened correctly, edges look clean, and the processor quite effectively reconstructs fine details. In this respect the C6 is already very close to LG's best TVs and the differences compared with the G6 are small.

Digital picture processing in the Philips PQS9000 performs well, though we have a few reservations. The "Distortion Reduction" function helps to smooth tonal transitions in lower-quality material, but it works rather unevenly. It can improve one part of the image, only to seem to lose its effect a moment later, still in the same scene, and show banding between shades again. A plus is that it doesn't remove film grain or fine noise, so the image retains its texture. We found the 'Medium' setting worked best and we recommend it. The upscaling to 4K itself is acceptable, although the image is very soft. Edges are heavily smoothed, which may leave some viewers feeling the picture lacks definition. In that case, it's worth slightly increasing the sharpness in the TV's menu, as this will make edges appear more defined. However, don't overdo the sharpening slider, otherwise artificial halos may appear instead of an improvement.

LG C6 received a panel with a maximum refresh rate of 165 Hz, which is great news above all for gamers using a powerful PC. In films, sport or on consoles we will of course make use of up to 120 Hz, but even then it is hard to fault the motion clarity. As befits an OLED, the panel's response time is almost instantaneous. Moving objects therefore do not leave the characteristic smearing or trails that we can still see on LCD televisions. This is especially noticeable in sport and fast-paced games, where the picture remains very clean even during dynamic movement.

For films and television LG has also prepared the TruMotion motion smoothing system. In the user settings you will find two separate sliders. De-Judder primarily addresses low frame-rate content, that is mainly films and TV series at 24 fps. You can use it to slightly reduce the characteristic judder or set a higher value if you want a very smooth image. De-Blur is useful for higher frame-rate material, chiefly sports broadcasts and 50/60 fps television.

In terms of motion handling the Philips PQS9000 performs exceptionally well for an LCD TV. It's not just the 144 Hz refresh rate, but above all how quickly the panel itself responds. At 120 Hz there are virtually no typical trailing smears behind moving objects. What is particularly pleasing is that this also applies to darker scenes, where many VA panels clearly struggle. Here motion remains clear and, in this respect, Philips pleasantly surprised us.

The "Motion Styles" feature lets you adjust how motion is displayed. It includes two sliders: "Smoothness" and "Blur Reduction", allowing you to tailor the effect to the content you're watching and your own preferences. Our suggested settings are shown in the photo. Treat them as a starting point and try to find the level of smoothing that suits you best.

LG has long focused heavily on gamers, and the C6 really lacks nothing important. The TV supports 4K at 120 Hz from consoles, and when connected to a PC it can run at up to 165 Hz. There is also VRR from 40 to 165 Hz, ALLM and a properly working HGiG. A big plus is support for Dolby Vision in games, so the Xbox Series X can use that format without giving up Game Mode. It's rounded off by a Game Bar, from which you can quickly check key signal parameters and change settings without leaving the game. In terms of features, the C6 is therefore one of those TVs that is really hard to fault. Whether you're gaming on a PlayStation, an Xbox or a PC, practically everything you could expect from a modern gaming TV is available here.

Gaming features

In terms of gaming features, the Philips PQS9000 has a lot to offer. Four HDMI 2.1 ports let you connect several devices without having to choose which one gets the full-capability port. Consoles can use 120 Hz at Full HD, 1440p and 4K, while a PC can also make use of 144 Hz at 4K or 240 Hz if you drop to Full HD. There's also VRR, which matches the refresh rate to the frame rate and prevents screen tearing. Its range is 48 to 240 Hz, with the upper limit applying in Full HD mode.

ALLM is present, so the TV automatically switches to game mode, and HGiG works properly, which is useful when setting HDR on a console. There's also a Game Bar for quick access to settings and signal information. The list even includes Dolby Vision gaming, but it's hard to enjoy this option because of very high input lag. Aside from that caveat, the feature set is really solid.