Hisense UR8S vs Philips PQS9011 / PQS9001 (The One 2026)

UR8S is a slightly higher-end Mini-LED, so you could expect a lot in terms of brightness. And indeed, on a synthetic test pattern peak brightness reached around 2200 nits. That’s a very good result, but as always what’s much more important is what the TV does in normal film scenes. Here the results are a bit more uneven. In bright scenes, where there’s a lot of light on screen, the UR8S can deliver really strong HDR. Brightness then reaches about 1500 nits, so the image is very intense and has plenty of punch. It’s worse with small bright elements on a dark background. The TV clearly dims them to keep good blacks and to prevent excessive bloom. As a result things like single stars or tiny reflections can be only around 200 nits. And here HDR is no longer as impressive. So you can see that the local dimming algorithm works effectively, but it also has its cost: sometimes it simply sacrifices the brightness of small details in favour of contrast.

Colours

With RGB Mini-LED TVs colours should be judged a little differently than usual. If we look solely at the panel’s native capabilities, the UR8S performs excellently. We measured around 94% coverage of BT.2020 and practically full DCI-P3. These are among the highest values currently found in LCD TVs and this is where the potential of the RGB backlight is most obvious. The problem is that this potential is not always realised in real scenes. When we ran the same measurements on test patterns with a film background applied, saturation of some colours began to fall noticeably. Individual zones are not always able to control the three RGB components so precisely when the scene becomes more complex. This is most visible with blue and magenta. On simple test patterns they can look very strong, but in more demanding scenes samples of those colours visibly shrink. So the UR8S’s capabilities are enormous, it’s just that the TV cannot fully make use of them in every scene.

Philips PQS9000 is a moderately bright TV. In our HDR scenes it reached roughly 450 to just over 500 nits. That's enough to notice a difference compared with SDR. Reflections of the sun, lamps or flares have a bit more sparkle than on basic TVs, whose brightness often tops out around 300 nits. However, it is not a level at which bright elements make a particularly strong impression. The biggest limitation remains contrast. Without local dimming, when the TV brightens a bright object it also raises the black level around it. There is therefore no clear separation of strong highlights from a dark background, and it is that contrast that can show what HDR can do. The PQS9000 offers more than the cheapest models, but despite decent brightness the effect remains fairly basic.

Colours

Philips deserves praise for the colours. Although the manufacturer calls this model QLED, in reality a PFS phosphor is used here instead of quantum dots. That choice does not prevent the TV from achieving good results. On both test patterns and in measurements of film scenes we recorded about 94% coverage of DCI-P3 and 75% of BT.2020. For this class of TV that is really good. In practice this means that the vast majority of colours used in HDR films and series will have appropriate saturation. Vibrant green or intense red are not much of an issue and add appeal to the picture. Limitations are easier to notice in some games and in rarer content that use the most saturated shades of the wide BT.2020 gamut. In such situations, displays with wider colour coverage, such as SQD or RGB LED, can show more. In its price bracket, however, the PQS9000 has nothing to be ashamed of.

For assessing the out-of-the-box colours we used Filmmaker mode, which is intended to show an image that is as close as possible to how the material was prepared. Looking at the white balance alone, the UR8S performs quite well. There is no strong tint that immediately jumps out, although as brightness increases a little too much blue and red start to appear, with a simultaneous shortfall of green. Colour errors therefore show up in measurements, but the image itself does not look bad. We have far greater reservations about how the UR8S manages picture brightness. In SDR the gamma sits around 1.9–2.0 for most of the range instead of the target 2.4. In practice this simply means the picture is too bright, especially in the midtones. Shadows are lifted too much, causing the image to lose some depth. A similar tendency is visible in HDR. The EOTF curve is above the reference value for a large part of its range, so the UR8S again brightens the image more than it should. This is not due to a lack of brightness — the TV has plenty — but to the way it manages that brightness. As a result, HDR content can look very striking, but not always precisely as it should.

Unfortunately, the factory picture settings for Film mode on the PQS9000 need refinement. In SDR the most noticeable problem is an excess of red in the white balance, which makes whites, greys and skin tones too warm, sometimes even slightly pinkish. On top of that the gamma runs below the reference across most of the range. The TV therefore brightens midtones and highlights, making the overall image look flatter than it should.

In HDR the white balance itself is much better. Apart from minor deviations the RGB components track closely, so there is no pronounced colour cast as in SDR. However, the EOTF curve shows a slight brightening of parts of the image, and the biggest issue appears in measurements of the wide colour gamut. Many hues deviate significantly from the target, with errors reaching levels of 8–9. The good gamut coverage we praised earlier therefore does not mean the TV hits specific colours equally well. It can display a wide colour range, but out of the box it does not use it very precisely.

Hisense provides plenty of calibration options and, in SDR, these can yield a very good result. After calibration, the white balance is practically even across the entire range, and colour errors fall to very low values. The UR8S can be adjusted very precisely here. HDR is somewhat different. The white balance itself can also be noticeably improved, although at the highest brightness levels larger deviations begin to appear. The most interesting aspect, however, is the behaviour of the EOTF curve. Even after it has been correctly set on test patterns, the UR8S still tends to interpret brightness in its own way when watching films. Depending on the scene, parts of the image are slightly brightened while others are dimmed relative to how they should appear. This shows that the algorithms controlling the local dimming have a significant influence on the final image. Calibration therefore allows colours to be improved very effectively, but we are not able to completely 'turn off' the way the UR8S manages brightness in HDR.

Calibration brought a significant improvement, especially in SDR material. We managed to even out the white balance and remove the previous colour cast, and the Color Checker measurements now look really very good. Colours are much closer to what should be on screen, so with ordinary TV or SDR films we can be satisfied with the outcome. Unfortunately HDR somewhat spoils that result. On the one hand it is limited by the panel itself, because calibration won't improve contrast or replace local dimming. On the other hand there remain colour errors that we couldn't correct because the CMS settings, that is the colour management controls, were greyed out and inactive. That costs Philips points with us. The white balance can be fine‑tuned, but without access to wide‑gamut adjustments it's not possible to order HDR colours equally well. It's a shame, because the SDR results show the potential is there, but we weren't allowed to make full use of it everywhere.

A big plus of the UR8S is the use of the MediaTek Pentonic 800 processor, and digital image processing is one of this model's stronger points. The TV handles smoothing tonal transitions very well, especially with lower-quality content. The feature responsible for this effect works effectively without overprocessing the picture. Even on the medium setting it can noticeably reduce visible banding and unevenness without heavily blurring details. Upscaling itself also performs very well. Lower-resolution content is displayed cleanly, edges look natural, and the image is not overly sharpened. The UR8S simply copes very well with a weaker signal, and in this respect it is one of its most notable strengths.

Digital picture processing in the Philips PQS9000 performs well, though we have a few reservations. The "Distortion Reduction" function helps to smooth tonal transitions in lower-quality material, but it works rather unevenly. It can improve one part of the image, only to seem to lose its effect a moment later, still in the same scene, and show banding between shades again. A plus is that it doesn't remove film grain or fine noise, so the image retains its texture. We found the 'Medium' setting worked best and we recommend it. The upscaling to 4K itself is acceptable, although the image is very soft. Edges are heavily smoothed, which may leave some viewers feeling the picture lacks definition. In that case, it's worth slightly increasing the sharpness in the TV's menu, as this will make edges appear more defined. However, don't overdo the sharpening slider, otherwise artificial halos may appear instead of an improvement.

The UR8S is equipped with a panel with a native 180 Hz refresh rate, so right from the start it offers excellent motion handling. The panel itself performs really well here, although some limitations typical of VA panels are still visible. Motion blur is relatively minor for this type of screen, but with faster motion (especially on darker backgrounds) it can still be noticed, particularly when compared with the same image on OLED TVs.

In terms of motion handling the Philips PQS9000 performs exceptionally well for an LCD TV. It's not just the 144 Hz refresh rate, but above all how quickly the panel itself responds. At 120 Hz there are virtually no typical trailing smears behind moving objects. What is particularly pleasing is that this also applies to darker scenes, where many VA panels clearly struggle. Here motion remains clear and, in this respect, Philips pleasantly surprised us.

The "Motion Styles" feature lets you adjust how motion is displayed. It includes two sliders: "Smoothness" and "Blur Reduction", allowing you to tailor the effect to the content you're watching and your own preferences. Our suggested settings are shown in the photo. Treat them as a starting point and try to find the level of smoothing that suits you best.

In terms of gamer features the UR8S performs really well. The TV supports practically everything you can expect from a modern console or PC display. It offers ALLM, VRR and 4K at 120 Hz. There is also Dolby Vision in Game Mode, so when using, for example, the Xbox Series X you do not have to give up that HDR format. PC gamers get even more options. The panel can run at 4K at 180 Hz, and dropping to Full HD can raise the refresh rate to as much as 330 Hz. There is also a Game Bar that lets you quickly check key information and change gaming-related settings. The only clear omission is a correct implementation of HGiG. With it enabled the TV still alters HDR brightness mapping, so we do not get the effect intended by that standard. Aside from that, the UR8S is very well prepared for both consoles and a powerful PC.

Gaming features

In terms of gaming features, the Philips PQS9000 has a lot to offer. Four HDMI 2.1 ports let you connect several devices without having to choose which one gets the full-capability port. Consoles can use 120 Hz at Full HD, 1440p and 4K, while a PC can also make use of 144 Hz at 4K or 240 Hz if you drop to Full HD. There's also VRR, which matches the refresh rate to the frame rate and prevents screen tearing. Its range is 48 to 240 Hz, with the upper limit applying in Full HD mode.

ALLM is present, so the TV automatically switches to game mode, and HGiG works properly, which is useful when setting HDR on a console. There's also a Game Bar for quick access to settings and signal information. The list even includes Dolby Vision gaming, but it's hard to enjoy this option because of very high input lag. Aside from that caveat, the feature set is really solid.