Hisense U6NQ vs Philips OLED770

Hisense U6NQ offers a stable HDR effect, which is a rarity in TVs with local dimming. On most streaming platforms, in films and series recorded in 4K, the television delivers consistent performance – in every tested scene, regardless of difficulty, the brightness is around 450 nits. This is a pleasant surprise, as in many models of this class, there are notable differences – some scenes are well-lit, while others are heavily dimmed by dimming algorithms. However, the Hisense U6NQ prioritises maintaining higher brightness, which comes at the expense of black levels, as mentioned in the contrast test paragraph.

The HDR effect on the U6NQ is satisfactory, offering a noticeable "burst" of light in bright moments, although it is worth noting the previously mentioned blooming, which may be visible in more challenging scenes. In terms of colours, the television also performs decently – the coverage of the DCI-P3 palette is 89%, and BT.2020 is 71%. Although these are not results that would impress more demanding users, for beginners in the world of high-quality materials, the U6NQ serves as a solid choice. Therefore, it presents an interesting proposition as an "entry-level" television for home cinema.

The Philips OLED770 does not attempt to compete with the brightest OLEDs on the market, and it would be difficult to expect that, as it is the entry-level model in Philips' range for 2025. In our measurements, it reached a maximum of around 700 nits, which allows enjoyment of HDR effects in scenes where light appears sporadically – for example, in the flash of headlights or a starry sky. In such moments, the image can truly be stunning. However, it is different when there are more bright elements on the screen. The television, like many cheaper OLEDs, limits luminance in those situations, causing the entire image to noticeably dim. This was best observed in a scene from the film The Meg, where the sun comes out behind an oil rig – the brightness then dropped to around 250 nits, which is almost three times less. The HDR effect remains pleasant to the eye, but it is worth being aware that this model performs best in scenes with less intense light. Fortunately, the OLED770 has a trump card – the coverage of the DCI-P3 colour gamut is as high as 99%, so colours in films and games are vivid and very close to what the creator intended to convey.

Hisense U6NQ in Filmmaker mode offers really decent colour reproduction, although it's worth noting that differences between individual units can be noticeable. The model we tested was pleasantly surprising, especially with HD content in SDR quality. The white balance was correct here, and errors around 3–4 ΔE should be acceptable for the average viewer. The television performed slightly worse with colour reproduction in 4K HDR materials. The dominance of blue shades led to unnatural cool tones on the Colour Checker chart, giving the image a "store-bought" character. Combined with issues in brightness characteristics – gamma and EOTF curve caused some parts of the image to be too dark – the Filmmaker mode loses some of its credibility in this case. Although the factory settings of the tested unit deserve praise, especially in SDR, there were still minor shortcomings that would require correction to fully exploit the capabilities of the television.

The first measurements already show that the factory settings of the Philips OLED770 have quite a lot to improve even in Filmmaker mode. The white balance chart clearly shows a lack of blue, resulting in a slightly yellowish tint to the image. In practice, the white is not snowy but leans towards warmer tones – which some may even appreciate, but from the perspective of accuracy, this is a deviation from the norm. The gamma, on the other hand, tends to the darker side – the average value is around 2.6 instead of the reference 2.4. In the midtones, the image appears subdued and more saturated, which may seem too "filmic," but detracts somewhat from naturalness. However, the most issues are evident in colour reproduction. The average error is relatively high, and some colours – particularly shades of grey – deviate significantly from what one should see. In everyday viewing, this means that sometimes colours may look less natural than we would like.

Although the factory settings of the Filmmaker mode on the Hisense U6NQ were quite good, we decided to carry out a calibration to fully assess the capabilities of this model. Only after such an adjustment can one see how the television performs under ideal conditions. In the case of SDR content, which was already at a high level, we managed to further improve the white balance. However, the most significant change came from correcting the brightness characteristics – the gamma was optimised and no longer causes excessive dimming of the image, which improves its naturalness.

For 4K HDR content, the calibration also produced positive effects. We eliminated the blue dominance issue, resulting in a more balanced and natural image. However, managing brightness in HDR materials remains a more complex matter. The EOTF curve, while having problems with dimming the image in the 10–30% brightness range in laboratory conditions, reveals other shortcomings in real scenes. The television tends to excessively brighten the smallest elements on the screen. As a result, this leads to visible halo effects around bright objects. This phenomenon, which we mentioned earlier in the context of contrast and HDR, arises from the technological limitations of the particular model and is often difficult to eliminate.

In short: although the Filmmaker mode with factory settings performed decently, calibration allowed us to extract an even better effect – minor adjustments resulted in a more balanced image, especially in HDR content. For users seeking the highest quality picture, calibration will be a beneficial step.

The Philips OLED770 from the outset signalled that it harboured significant potential, but in its factory settings, it was difficult to see this fully. The picture was often too warm, and some colours appeared to have lost their naturalness along the way. Calibration, however, revealed that it is a very responsive television – it reacted to every adjustment and almost immediately unveiled another layer of its capabilities. The white balance could be set in both SDR and HDR to eliminate the yellowish tint and introduce a neutral, clear white. The gamma stabilised closer to perfection, allowing midtones to regain their naturalness, and shadows stopped being artificially darkened, perhaps even with a slight brightening effect. The result was obvious... Films were watched with greater ease; the picture had cinematic depth, but without the feeling that something was exaggeratedly darkened. However, the most interesting aspect was the work on colours. Factory errors were not dramatic but slightly noticeable – skin tones were sometimes too warm, and grey didn’t always have the shade we expected. After calibration, the error values dropped to around 2, and in many cases even below 1. This is certainly a level lower than the threshold of human perception. In other words, after correction, the colours finally "clicked" into place. Looking at the screen, we had the impression that the television had begun to speak with its full voice. Like an instrument that has finally been well tuned.

With high-quality materials, such as 4K, tonal transitions on U6NQ look really good – the colours blend nicely, and the image is coherent. Unfortunately, when we move to content in lower resolutions, the television does not offer any additional features that could improve this aspect. An example is the test with the light bulb, where it is clearly visible that the television has a problem with rendering subtle tonal transitions.

However, digital processing performs quite well. The image looks pliable, is pleasantly soft, and free from excessive banding. Moreover, thanks to the sharpness settings, it can be adjusted according to personal preferences – whether towards a softer or sharper image. Overall, although scaling lower quality materials could be better, the television handles image processing effectively.

The issue of the aforementioned colour banding can largely be mitigated thanks to the 'distortion reduction' feature, which is an algorithm for smoothing tonal transitions in Philips. It performs best at a low setting – effectively eliminating unwanted colour bands while not introducing strange artefacts or losing image detail. This is one of those features that is truly worth leaving switched on.

The situation is somewhat worse regarding upscaling. The image from a lower resolution can be too soft, while in some areas, characteristic 'jaggies' appear. The impression is that the algorithm is trying to reconcile two conflicting directions – smoothing and sharpening – and ultimately fails to find a happy medium. As a consolation, it can be added that the television has no issues with overscan, meaning it does not cut off the edges of the image, which sometimes occurs in other competing models.

Hisense U6NQ offers native 60 Hz refresh rate at 4K resolution, but the manufacturer has added a feature that allows the refresh rate to be increased to 120 Hz, at the cost of reducing the resolution to Full HD. This solution, which we have seen before in TCL televisions, such as the C655 or C655 PRO. This gives the user the choice – higher motion fluidity or full resolution. This is a sensible approach, especially considering that many games on next-generation consoles do not achieve full performance in 4K at 120 Hz.

As for movies, the television is equipped with a motion smoothing feature that allows you to adjust the motion characteristics to your own preferences. This allows for a more cinematic effect or increased fluidity in dynamic scenes. Overall, Hisense U6NQ offers reasonable solutions in terms of motion fluidity that should satisfy both gamers and movie enthusiasts.

The issue of the matrix in the Philips OLED770 is not entirely straightforward. The manufacturer claims a 120 Hz panel, but our measurements showed that the screen can accept a 4K signal even at 144 Hz. That sounds like great news – after all, who wouldn't want an additional mode for PC gamers at this price? However, the reality turned out to be more complex. With 120 Hz content, the television behaves like most OLEDs – the image is absolutely clear, with no trace of ghosting or blurring, making it perfect for both dynamic games and sports broadcasts. The problem only arises at 144 Hz. Unlike models with official support for this frequency, here you can observe the phenomenon known as frame skipping. This means that the television cannot display all the frames – some are skipped, causing motion to lose smoothness, and double contours appear on the screen. The effect resembles the operation of the BFI function, which Philips does not offer in this model anyway.

Hisense U6NQ offers the option to choose between 4K at 60 Hz and Full HD with a refresh rate of 120 Hz. This solution may appeal to gamers who want to decide what is more important to them – higher resolution or smoothness. The television supports features such as ALLM and VRR, which help in achieving smoother gameplay. A nice addition is the GameBar – an easy-to-use panel that allows you to quickly change picture settings and check statistics. There is also a Dolby Vision Game mode, which operates with low input lag, which is a big plus for console enthusiasts. Unfortunately, it lacks HGiG, which could further enhance HDR quality in games. Nevertheless, the Hisense U6NQ performs quite well as a gaming television, especially for those who play occasionally and do not require the highest refresh rates in 4K. It is a solid choice for less demanding users.

If someone is looking for a television for gaming, the Philips OLED770 is a contender that is hard to ignore. The mere fact that we have an OLED here provides an excellent starting point – perfect black and infinite contrast make evening sessions in atmospheric games look as if they were lifted straight from the cinema. On top of that, there is the Ambilight system, which consists of LEDs on the back of the television that extend the image onto the wall behind the screen. The effect is such that even playing FIFA can look like a small spectacle, and in horror games the atmosphere becomes truly thick. From a technical standpoint, it's also quite decent. The Philips OLED770 supports variable refresh rate (VRR) up to 120 Hz, has an automatic mode for gamers (ALLM), and if someone is using an Xbox Series X, they can also count on Dolby Vision support in games. One must only know that in this mode the input lag is slightly higher than standard, though still at an acceptable level. As a bonus, we get the “Game Bar” panel, which is a special tool bar for gamers. It isn’t the most conveniently designed solution, but it allows you to check key parameters without leaving the game. Overall, this results in a television that, on one hand, has all the essential gaming features, and on the other, can add something unique – Ambilight. And it is this mix of technology and visual effect that makes the OLED770 one of the better screens for gaming at home.