Hisense E7Q PRO / E79Q PRO vs Hisense U7S / U77SE

When it comes to the quality of the HDR effect, the E7Q PRO is unfortunately not a television that can impress with brightness alone. In real film materials, we measured around 250–300 nits, which is simply too little for HDR to look spectacular. There is a lack of that "spark" in bright details, highlights, and light effects, and in many HDR scenes, it can resemble good SDR more than true cinematic HDR. The consolation in all this is the colours. We managed to confirm that the E7Q PRO is a PFS-type television, meaning it has an additional filter that improves colour gamut coverage. As a result, even if the brightness does not deliver, the colours in HDR content can be appropriately saturated and pleasing to the eye, without the feeling of a "washed-out" image.

The Hisense U7S has considerable potential for HDR display, but it cannot exploit that potential in every scene. On a test pattern it reaches around 1,100 nits, so the backlight itself is very strong. In our brighter film scenes we measured about 640 to 745 nits. That is still plenty for the sun or bright highlights to have a clear bloom and to show an advantage over SDR material. When the TV needs to brighten a larger portion of the image, it handles it fairly well.

The problem appears with small highlights on a dark background. Each of the 192 zones covers an area much larger than a tiny point on the screen. If the TV were to light that whole zone strongly, it would also brighten the area around the highlight. Hisense tries to avoid that and dims the entire zone. This makes blacks look better, but a small bright object that should attract the eye also loses intensity. That is why in two more demanding scenes we recorded only 297 and 154 nits. The difference is large: in one shot HDR can impress, and in the next small highlights are noticeably muted. The U7S therefore prioritises preserving deep blacks, even at the expense of bright details. With that number of zones it is an understandable compromise, but worth bearing in mind — the peak 1,100 nits tells us about the backlight’s capability, not how brightly the TV will show every element of a film.

Colours

Hisense describes the U7S as ULED, but that is a marketing name, and it is a PFS phosphor backlight that expands the colour palette here. In our measurements the TV covered about 91% of the DCI-P3 colour space and 71% of BT.2020. Those are good results, though they fall short of the best screens on the market. The largest shortfall is in green — the TV does not even reach the DCI-P3 boundary here, so the most intense shades will be less saturated than they should be. Most colours in HDR films and series still look suitably vibrant. A positive is the repeatability of the results. Gamut coverage on test patterns and in film scenes is practically identical.

In terms of colour reproduction, we tested the Hisense E7Q Pro in Movie mode, which turned out to be the best built-in preset without a doubt. This mode, unlike the Eco, Standard or Dynamic settings, offers the most natural colours straight out of the box. Although no factory mode is completely free of flaws, the E7Q Pro deserves high praise for its colour rendering in standard SDR content. The colour palette is very well tuned here, and the errors in the Color Checker tests often did not exceed a value of 3, which is an outstanding result rarely seen in such affordable televisions. The only drawback we noted in SDR is the tendency to darken some elements of the image, as indicated by the slightly raised gamma graph. The television performs slightly worse with colours in HDR mode. Here, colour errors become noticeable to the naked eye, mainly due to a lack of blue in the white balance. This causes the colours on the screen to be too warm, and for some viewers, they may even seem “too cinematic.” Of course, to improve these parameters, we proceeded with professional calibration.

Out-of-the-box colours on the Hisense U7S are decent, but there are a few areas to improve. In SDR there is a red bias in the white balance, which makes the picture too warm and, in places, slightly pink. You can notice this on faces and on bright, neutral surfaces. The gamma also runs below the target, so the TV brightens the image, particularly in darker areas. That makes shadow detail easier to see, but the scene loses some of its depth.

In HDR the white balance is somewhat more even, but not entirely neutral, with a shortage of blue in the mid-tones and a lack of red in the brightest parts. A bigger issue is how brightness is rendered. The EOTF curve shows a large portion of the mid-tones being lifted, causing the picture to look brighter than the source intends. Color Checker measurements are also weaker than in SDR: many errors are around 3 to 4, and some reach as high as 8. Colours can therefore look attractive, but they are not always faithful to what we should see. There is room for improvement here and we will see how much can be corrected through calibration.

In the case of materials with a standard dynamic range (SDR), our actions in Filmmaker mode turned out to be largely cosmetic 😉. We mainly focused on a subtle adjustment of the white balance and equalising the gamma curve, which allowed us to recover details in the darker areas of the image that previously tended to get lost. However, it is worth noting that the E7Q Pro unit we tested was exceptionally well-made at the factory. We remind you that these parameters depend on the specific unit – with mass production, factory calibration can be random, so your unit may require slightly different intervention. The biggest beneficiary of professional calibration was undoubtedly HDR mode. This is where we did the most work, which brought spectacular results. We managed to effectively tame the excessive warmth of the image, caused by a factory deficiency in blue colour. After calibration, the colour errors were reduced to a significantly lower level, which will certainly please those who watch a lot of streaming content in HDR format, expecting faithful reproduction.

Calibration of the Hisense U7S brought the biggest improvements with SDR material. We managed to even out the white balance, so the previous warm tint has gone and whites and greys now look neutral. Gamma is also now very close to the reference, and the TV no longer brightens the picture unnecessarily, so darker scenes have regained depth. Color Checker measurements confirm the improvement: most errors are below 2. That means the picture is very well set up for watching regular TV and SDR films. It wasn't as smooth in HDR. There is no effective way to correct the EOTF curve, so the TV still interprets a film's brightness somewhat on its own. It brightens parts of the picture and can dim the brightest elements depending on the scene and the behaviour of the local dimming. Calibration could not eliminate this. This is also reflected in the Color Checker results, where many errors remain around 3–4 and a few exceed 7. So the result in SDR is really very good, but in HDR we must accept that the TV adds its own interpretation of brightness to the image.

When it comes to upscaling and digital image processing, the E7Q PRO deserves praise. The scaling performs really well and does not dramatically fall behind much more expensive, advanced televisions. Lower-quality materials can look clean and sensible, without the impression that the image is artificially "enhanced." However, the smoothing function presents a bit worse. Indeed, it can be effective and improve tonal transitions in poor quality materials, but at the same time, it can introduce undesirable effects. It sometimes removes grain or adds unwanted artefacts, giving the image a more "digital" character. Therefore, we mainly recommend it to those who prefer a smoother, less cinematic style of image.

The handling of lower-quality material is fairly mediocre on the Hisense U7S. The Pentonic 700 chipset used here does not cope particularly well with strong compression artefacts. The menu includes a "Smooth and Gradient Image" function, but its performance leaves much to be desired. At the low setting tonal transitions show little improvement, although at least the image does not suffer. The medium and high settings still do not remove obvious banding between shades, and they begin to blur details; in our test material even parts of characters' faces disappeared. Interestingly, film grain remains untouched at every level. If you do use this feature, stick to the low setting. Its current behaviour needs refinement, but that is mainly down to the chipset used here.

Upscaling to 4K performs much better. Lower-resolution content gains in legibility, edges are well reproduced, and fine elements look sharp. That does not mean it recovers details that were never in the recording, but the TV makes good use of what it receives from the source. Another plus is that it does not crop the image edges, even with an SD signal.

In the category of smearing and motion fluidity, the E7Q PRO has one very strong argument. At this price, Hisense has included a 120 Hz panel, and in PC mode, it can even operate at 144 Hz. This immediately provides greater possibilities in motion settings, as the menu offers more options for smoothing the image. Among other things, we have frame interpolation options, which allow us to adjust the fluidity for sports or films, depending on whether we prefer a more cinematic character or a "theatrical" smoothness.

Motion handling on the Hisense U7S is decent thanks to the 144 Hz refresh rate. For films there is also a motion smoother with adjustable judder and blur reduction. You can therefore keep a more cinematic motion or increase smoothness if jerky camera pans bother you. The high refresh rate is also useful for sports and gaming, but unfortunately it does not solve the panel's biggest problem.

That problem is pixel response time. Fast-moving objects leave long, clearly visible trails, as our UFO test shows. It looks worst on dark backgrounds, where the trail behind the object is particularly pronounced. So motion can be smooth, but the moving object itself loses sharpness, and that difference on the U7S is fairly easy to notice.

The E7Q PRO is a phenomenal screen for gamers. Aside from the typical "ache" of Hisense, which is the lack of support for the HGiG format due to permanently active tone mapping, we get practically everything one can expect from a television that is to have a gaming label. There are two HDMI 2.1 ports, along with a full set of key features. We have variable refresh rates, automatic switching to game mode, and support for 4K at 120 Hz. Additionally, all the most important settings are at hand in a clear Game Bar. This tool not only looks modern but also has a typically "gaming" edge and truly makes life easier while gaming.

The Hisense U7S has a lot to offer gamers. You get two HDMI 2.1 ports and support for 120 Hz at Full HD, 1440p, and 4K, so modern consoles’ capabilities are well used. When connected to a PC you can use 144 Hz at 4K or switch the resolution to Full HD and run 240 Hz. So there’s a wide choice, although it’s worth remembering the motion smearing mentioned earlier, which the high refresh rate does not eliminate. VRR and ALLM are also present. The first helps prevent tearing when frame rates in a game change. The second automatically switches the TV into game mode, so you don’t have to dig through the menu each time. VRR works from 48 to 240 Hz, with the highest refresh rate available in Full HD. Xbox users can also play in Dolby Vision, including at 120 Hz. Importantly, this format does not introduce significant input lag here. The Game Bar also looks very good. It’s easy to read, visually appealing, and lets you quickly check what signal the TV is receiving. There are also handy gaming settings at your fingertips, including shadow brightening. If it’s hard to spot an opponent in a dark game, you can improve visibility without digging through the entire menu.

Our biggest complaints concern HGiG. Hisense continues to do its own tone mapping, which makes setting HDR on the console confusing. You adjust a checkerboard test pattern and the TV continuously adapts how it looks. As a result, the moment the pattern disappears does not correctly indicate the screen’s brightness limit, and it’s easy to set the value too high. For this model it’s better to set the target HDR peak brightness on the console to about 900 to 1000 nits, rather than relying on the configurator.