SONY Bravia 9 II XR95M2 vs LG OLED C6 (WOLED)

The real showcase for the new backlight architecture and Sony’s processor is HDR reproduction. At the official launch the Sony engineers said (not officially 😉) that the Bravia 9 II’s brightness should be almost identical to their professional director’s monitor BVM-HX3110, priced at astronomical sums. Our lab tests confirmed they weren’t empty promises. In synthetic measurements on the L20 test pattern the TV easily exceeded 4000 nits of peak brightness. More importantly, these impressive results translate directly to real film scenes. In most of the demanding shots we tested the screen consistently held brightness around 2500 to 3000 nits. Whether the light was small and pinpoint or flooded almost the entire screen, the HDR effect was incredibly intense.

Colours

Colour is another key pillar of RGB Mini LED technology (Sony’s True RGB implementation). For testing this type of panel we’ve permanently added a new research section to check how TVs handle colour in real-world conditions. Traditional synthetic-chart tests are no longer enough to determine real gamut coverage. From now on we also measure colour saturation directly in selected film scenes by overlaying measurement points. So how do the colours perform?

In synthetic tests the Bravia 9 II posts excellent results. For the popular DCI-P3 space used for HDR, colour-gamut coverage was almost 98%, while for the extremely wide and demanding BT.2020 space our measurements showed nearly 90%. However, in real-world, varied scenes those values drop by a few percentage points. This is directly due to the nature of zoned RGB backlighting. When differently coloured elements or bright white points appear next to each other, light from adjacent zones begins to mix slightly, producing a whitish backlight. This, of course, affects colour saturation, slightly reducing it. It shows that despite Sony’s brilliant algorithm controlling the RGB diodes, that number of zones is too small to eliminate the effect completely.

Is this a reason to complain? Of course not. The Bravia 9 II’s final colour coverage is the same as that of a very good QLED TV, and it’s important to remember: the vast majority of films and TV shows distributed in HDR use the DCI-P3 gamut. In that standard Sony easily maintains very high colour saturation, regardless of the scene.

The HDR performance of the LG C6 is really very good. LG Display’s new WOLED panel has mainly brought a significant increase in brightness. In our unit we measured around 1500 nits and, importantly, the TV can show similar values in many normal movie scenes as well. That gives HDR real punch. Bright highlights, lamps and sunlight can be genuinely intense, and most HDR movies simply look very impressive. Of course it’s still an OLED, so brightness falls in scenes with a lot of white. The fifth scene from the movie The Meg illustrates this well, where the C6 reached around 600 to 700 nits. That’s still a very good result, but it also shows the new panel hasn’t shed all the limitations typical of OLEDs.

Colours

When it comes to colours, it’s also hard to raise major objections. The C6 covers about 99% of the DCI-P3 gamut and roughly 75% of BT.2020. In practice colours are very saturated and, importantly, stable regardless of the scene. That’s worth emphasising, because not every TV behaves the same in this respect. In some RGB Mini LED models colour saturation can depend more strongly on image brightness. A wider colour gamut today is mainly offered by QD-OLED TVs and new SQD models with a new generation of quantum dots. However, the C6 still performs very strongly here and is able to produce suitably saturated colours in most movie scenes.

Contrary to expectations and high hopes, the Bravia 9 II we tested straight out of the box showed some issues with its factory calibration. Looking at the white balance charts, you can see it isn’t perfect. In SDR content it mainly lacked the red component, so the picture leaned toward cooler, bluish tones. By contrast, white balance in HDR looked much better in that respect. So where do the visible errors in image reproduction come from? They stem from an unexpected tuning of the gamma and the EOTF curve. In both cases the Bravia 9 II straight from the factory showed a clear deviation from reference standards.

In SDR content the gamma was significantly too high, at times running very close to 2.8 instead of the reference 2.4. In practice this meant the image was artificially dark and appeared washed out of colour, with details in dark areas (the shadows) completely lost. The opposite was true in HDR material, where brightness reproduction is handled by the EOTF curve. That curve was pushed too high above the correct value, which resulted in the picture being artificially brightened across most luminance ranges. As with every TV we test, we also subjected this unit to professional calibration. You can see the results and how we managed to correct those factory errors below.

Right out of the box the LG C6 is quite well set up, especially if you choose the Filmmaker mode. In SDR material the white balance is decent, although as brightness increases there is a slight lack of red. The image becomes a bit cooler, but not enough for it to be very noticeable during normal viewing. More is happening in the brightness characteristic. Gamma is a little low and instead of holding at 2.4, for a large part of the range it sits closer to 2.1–2.2. In practice the C6 slightly brightens midtones. Shadows are therefore more readable, but the image loses some depth compared with how it should look in a darkened room.

In HDR the situation is a bit more interesting. The start of the greyscale looks very good, but from about 20–30% brightness the white balance starts to drift increasingly. As brightness rises there is more red and a noticeable lack of blue. In the brightest sections the difference is already significant and also affects the reproduction of some colours. The EOTF curve itself is followed quite well through most of the range. The C6 only tends to slightly brighten the image, which we also saw in our film comparisons. The largest deviation appears around the brightest parts, where the TV starts adapting the signal to the panel's capabilities.

The factory Filmmaker setting in HDR is therefore not perfect, but overall performs well. The biggest area for improvement is the white balance, especially at high brightness.

Fortunately, with professional calibration, most of the factory shortcomings of the Bravia 9 II can be effectively eliminated. We managed to precisely correct primarily the white balance and the gamma and EOTF curves. After those adjustments, in everyday use and during movie sessions the TV looks vastly better. The image gained proper dimensionality, the cool tint to the whites disappeared, and shadow details that had previously been lost due to excessively high gamma finally became clearly visible. Although we ultimately assess colour accuracy as very good, as specialists we must point out one fairly serious design flaw in this model. The Bravia 9 II could look even better if it weren't for the complete lack of an advanced colour management system in the TV's menu.

While a basic white balance correction can be carried out here without issue, the settings lack options for adjusting specific colours. We tried to tackle this from every angle, both using the traditional method from the remote and with dedicated calibration software for Bravia TVs. Unfortunately, that function has been entirely locked. We suspect this may stem from the specifics of the new RGB architecture, which imposes these limitations. It's a real shame, because without it you can't fine-tune colour reproduction to perfection. The inaccurate red, for example, still stands out. Let's hope Sony will fix this shortcoming over time via an update.

LG TVs have long responded very well to calibration, and the C6 is no exception. After adjustments we managed to set the white balance practically perfectly, and most colour errors fell below 3, often down to around 2. In practice this means very accurate colour reproduction in both SDR and HDR. An interesting detail only appeared with the HDR brightness response. On a classic EOTF chart everything looks almost perfect and at first glance it would be hard to find fault. Only when we measured the TV’s behaviour using filters based on real film scenes did it become clear that the C6 has a slight tendency to artificially boost image brightness.

It’s not a huge difference and many viewers may even see it as a positive, because HDR looks a bit more striking as a result. From the point of view of fidelity to the source material, however, it’s not ideal — some scenes are simply a touch brighter than the filmmaker intended. Interestingly, this is rather unusual for LG. In previous generations the brand’s TVs typically held very closely to the reference picture curve after calibration. The C6 is still very close to the standard, but that subtle brightness 'boost' can indeed be noticed in films and TV series.

Digital processing and upscaling have long been Sony's forte, and after testing the Bravia 9 II we can confidently say that nothing has changed in this area. Sony remain at the top of the market. Their proprietary XR image processor, which in this model works together with the main MediaTek Pentonic 1000 chip, deserves the highest praise. That combination delivers excellent results. Upscaling lower-resolution content is extremely effective and precise.

However, what earns the most praise in the XR processor's performance is its tonal transition smoothing function. The system can reduce posterisation in heavily compressed material to practically zero. Crucially, the algorithm does this in a very intelligent way. It removes only the irritating digital 'steps' in gradients (banding), but does not blur fine texture detail or create an artificial, 'plastic' look lacking film grain. The image remains sharp, natural and cinematic.

Here the LG C6 has taken a really big step forward. The TV uses the same processor found in the flagship G6, and in terms of image processing the two models are very close. That's a big plus, because in this area LG's processor this year performs excellently. The "Smooth Gradation" function works particularly well. With heavily compressed material it can effectively hide ugly tonal banding and artefacts that often appear, for example, in lower-quality streaming. It's best to leave it on the "Low" setting. Then the improvement is clear, and the TV doesn't yet start blurring fine detail. Higher levels smooth the image more aggressively, but can already remove some of the natural texture of objects on screen. Upscaling itself also performs very well. Lower-resolution content is properly sharpened, edges look clean, and the processor quite effectively reconstructs fine details. In that respect the C6 is really close to LG's best TVs and the differences compared with the G6 are small.

In the specifications for the Sony Bravia 9 II you won't find dizzyingly high screen refresh rates above 120 Hz, which some more demanding PC gamers might see as a drawback. However, in everyday use — whether during film sessions, playing console games or watching sport — it's really hard to criticise the motion smoothness. The VA panel used here does exhibit some slight, natural smearing typical of this panel type, but the excellent Motionflow smoothing algorithms come to the rescue. The system menu includes sliders for blur reduction and smoothing that let you precisely tune the motion characteristics to your own preferences.

The LG C6 features a panel with a maximum refresh rate of 165 Hz, which is great news especially for gamers using a powerful PC. For movies, sport and consoles we’ll of course be limited to 120 Hz at most, but even then it’s hard to fault the motion clarity. As you’d expect from an OLED, the panel’s response time is near-instant. Moving objects therefore don’t leave the characteristic smearing you still see on LCD TVs. This is especially noticeable in sport and fast-paced games, where the picture remains very clean even during dynamic movement.

For movies and TV, LG has also included a motion smoothing system called TruMotion. In the user settings you’ll find two separate sliders. De-Judder is primarily for low-frame-rate material, namely movies and TV series at 24 fps. You can use it to slightly reduce the characteristic judder or increase it if you prefer a much smoother picture. De-Blur, on the other hand, is useful for higher-frame-rate content, mainly sports broadcasts and 50/60 fps TV.

Aside from the fairly serious design oversight of limiting the platform to just two full HDMI 2.1 ports, the Bravia 9 II offers almost all the key gaming features available on the market. Sony has already accustomed us to such a rich feature set in its previous designs. The list of supported technologies here is extensive. It includes automatic low-latency mode (ALLM), variable refresh rate (VRR), as well as a fully compliant implementation of the HGIG standard and Dolby Vision tailored specifically for gamers.

LG has long focused heavily on gamers, and the C6 essentially lacks nothing important. The TV supports 4K at 120 Hz from consoles, and when connected to a PC it can even run at 165 Hz. On top of that there’s VRR from 40 to 165 Hz, ALLM and a properly functioning HGiG. Another big plus is support for Dolby Vision in games, so the Xbox Series X can use that format without giving up game mode. The package is rounded out by the Game Bar, which lets you quickly check key signal parameters and change settings without leaving your game. In terms of features alone, the C6 is one of those TVs it’s really hard to fault. Whether you play on PlayStation, Xbox or PC, practically everything you could expect from a modern gaming TV is available here.