PHILIPS PUS9010 (IPS) vs LG MRGB85B

In the Philips PUS9010 version with an IPS panel, the HDR brightness sadly performs worse than in the previously tested 55-inch variant with a VA panel. The difference reaches about 100 nits, which is noticeably significant given the relatively low values. While the VA version could exceed 500 nits, here the maximum brightness reaches around 400 nits. This level still allows for watching movies and series in HDR, especially on streaming platforms, but the effects are clearly more subdued. Bright elements don't have the same impact, and scenes requiring high luminance are less impressive. On the plus side, the coverage of the DCI-P3 colour gamut is commendable. The IPS version offers about 91%, which is roughly 5% more than the variant with a VA panel. This translates into slightly better colour saturation in HDR content, despite the lower brightness. Colours can appear more vivid and cohesive, especially in colourful scenes.

LG MRGB85 offers moderate brightness. On test patterns it reaches around 700 nits, which is a decent result in itself. In real movie scenes, however, values are lower and most often fall in the 400 to 600 nits range. Bright, wide shots look best. In scenes with large areas of black the TV noticeably reduces luminance, attempting to keep contrast as high as possible. The HDR effect is therefore visible, but it is far from the level offered by more advanced Mini-LED designs. Particularly in darker parts of films, the limitations of the edge-lit backlight and imprecise local dimming become apparent again.

HDR colours

A much stronger suit of the MRGB85 is its colour. The TV covers around 95% of the DCI-P3 colour space and 74% of BT.2020, so HDR content can look vivid and impressive. Colours are well saturated, and the difference compared with basic LCD TVs is clearly noticeable. It is worth noting, however, that this is not a classic RGB backlight, where each of the three primary colours is generated by a separate diode. Red is produced by a PFS phosphor, which expands the palette and achieves more saturated red tones. This solution performs well for colour reproduction, but it does not change the limitations of the local dimming. The diodes are not driven independently in the way the series name might suggest... so it turns out that Mini RGB is not the same as Mini-LED RGB!

We evaluated colour reproduction, as always, on factory settings, focusing on the movie mode, which in the case of Philips usually offers the best starting point. This is also a good moment to show how much the same model of TV can vary depending on the panel used. Looking at the white balance, the overall tendency remains similar to the version with the VA panel. There is still excessive red in the whites, however, in the tested unit with the IPS panel, there are also losses in the blue channel. As a result, the picture has a slightly different colour character, which is well illustrated in the comparative materials. This is a very good example showing why ready-made settings downloaded from the internet do not always work even within the same model.

However, returning to the assessment itself, this unit performs quite well, especially in SDR content. Colour tests show correct saturation and colour consistency, without glaring errors that could hinder everyday viewing. In HDR materials, it is possible to notice slight losses in reds, but these are not flaws that completely spoil the image perception. The biggest limitations do not stem directly from the colours, but rather from the whites and blacks. The use of an IPS panel and slightly lowered gamma means that the image is slightly boosted in brightness, and weak blacks further affect perceived contrast. This makes everything look brighter, but at the same time, it lacks depth, especially during evening viewing.

We tested the TV in Filmmaker Mode because, of the available presets, it produced the image closest to reference. The out-of-the-box colour reproduction wasn’t perfect, though. The biggest deviations were in the white balance, with too much red and not enough blue in the image, so the overall picture shifted noticeably towards warmer tones. Whites took on a slightly yellowish tint, and skin tones and bright areas didn’t always look natural. It wasn’t a fault that ruined the viewing experience, but in a direct comparison with the same panel after calibration the difference was clearly visible.

After calibration, the picture has been brought to a really reasonable level. The whole thing looks cohesive and natural, and when it comes to colour reproduction, it's hard to definitively say whether we're dealing with a VA or IPS panel. This is a good sign, showing that the television has a solid foundation for further adjustments. The larger colour gamut in this variant is a plus, as it can subtly enhance the depiction of colourful scenes, especially in HDR content. However, this advantage is largely offset by the boosted blacks resulting from the use of an IPS panel. The limited depth of black affects perceived contrast, particularly when watching in a dark room. As a result, despite noticeable improvement post-calibration, the final rating remains the same as that of the variant with a VA panel. Better colours are not able to fully compensate for the weaker blacks.

Calibration primarily corrected the white balance and removed the previously noticeable warm cast. After the correction, whites no longer had a yellow tint and colours became more neutral and natural. The biggest improvement was seen in SDR material, where the picture looked even and much closer to the reference. A similar effect was achieved in HDR. After calibration the image became more controlled, although not all of the TV’s limitations could be eliminated. The main issue remained intense reds, which were not always reproduced with sufficient precision. In practice the MRGB85 handles everyday SDR content very well, but in more demanding HDR material its limitations are still clearly visible.

In the Philips PUS9010, we find another iteration of the P5 Perfect Picture image processor, which aims to improve the quality of lower-grade materials. One of the components of this system is a distortion reduction function that smooths tonal transitions. It works effectively and actually reduces visible banding. Unfortunately, it does so quite aggressively. In practice, it can mute details such as material textures or film grain. This is a clear compromise, so we wouldn't particularly recommend it for movie sessions. For more casual content, like YouTube or regular television, it performs much better. The P5 processor also handles lower resolution materials quite well. The image is soft, at times even too soft, but it can easily be corrected using the sharpness slider, adjusting the effect to personal preferences. A positive aspect is also the absence of edge cropping in SD materials, which is still not standard in this class of televisions.

Upscaling and digital image processing perform quite well in the LG MRGB85. The Alpha 8 AI 4K Gen7 processor efficiently upscales lower-resolution material, and you can easily turn off overscan regardless of the source. The TV also handles compression artefacts well. The "Smooth Gradation" function can effectively reduce visible banding and tonal unevenness, but it isn't always precise. At higher settings it can also smooth out fine details, such as the texture of materials. A plus is that it doesn't remove film grain. The safest option is the "Low" or "Medium" setting, which offers the best compromise between artefact reduction and preserving detail.

Philips PUS9010 has a 4K panel with a refresh rate of 144 Hz, which will be appreciated mainly by sports fans and gamers. This is especially noticeable in dynamic scenes where the motion is sharp, and annoying blur is almost non-existent. When it comes to movies (standard 24 fps), Philips offers us a proven set of settings known from its higher series. Two sliders are used to control motion. “Smoothness” allows you to adjust the picture to your liking: at low settings, it maintains a cinematic character, while moving the slider to the right gives us a perfectly smooth, albeit slightly “theatrical” effect. Meanwhile, “Motion Blur Reduction” is a feature designed for sports – it ensures that fast-moving objects do not lose detail and remain clear.

The LG MRGB85 is fitted with a VA panel with a native 144 Hz refresh rate, so its motion handling is very good. The TV easily handles 120 Hz content from consoles and higher refresh rates when connected to a PC. That matters not only for gaming but also when watching sport, where camera motion is noticeably smoother than on basic 60 Hz panels. There’s also the TruMotion system, which lets you set the level of motion smoothing yourself. You can keep a more cinematic motion or increase smoothness, which works well for live sports and TV programmes. The adjustment range is wide, so you can easily tailor the motion smoothing to your own preferences.

Philips PUS9010 is a solid machine for gaming. It has everything that’s important: VRR, automatic game mode (ALLM), and support for HGiG. The latter is fantastic – it allows you to set HDR in games exactly the way the developers envisioned. The TV handles 120 Hz refresh rates effortlessly at every popular resolution (1080p, 1440p, and 4K). It doesn’t matter if you connect a PS5, Xbox, or a powerful PC – everything runs smoothly and just as it should. Gamers will also appreciate the Game Bar. It’s a quick, clear menu where you can immediately see if the low latency mode is active. This is especially useful when frequently switching between different consoles. The whole experience is enhanced by Ambilight. Evening sessions with this backlighting create a whole different level of atmosphere; the image seems larger, and dynamic scenes are even more impressive. Even if someone isn’t a fan of such “gimmicks,” it’s hard to deny that it makes an impression.

When it comes to gaming, the LG MRGB85 performs by far the best. The manufacturer hasn’t skimped on the kit and has essentially carried over the full suite of features from pricier TVs into this model. You get three HDMI 2.1 ports with full 48 Gb/s bandwidth. Each supports 4K 120 Hz from a console, and when connected to a PC also 4K 144 Hz. So you don’t need to worry which port to plug your console or PC into, as they all offer the same set of capabilities.

On board you’ll also find VRR, AMD FreeSync Premium, NVIDIA G-Sync Compatible, ALLM and HGiG. Dolby Vision Gaming is included too, allowing supported games to use high refresh rates and dynamic HDR simultaneously on Xbox. Rounding it off is Game Optimizer, a handy in-game menu. Without leaving the game you can change the picture profile, brighten shadow detail or check the current frame rate. In terms of gaming features, the MRGB85 therefore offers almost the same as significantly more expensive LG models.