Philips PUS8359 (IPS) vs Philips OLED910

The quality of the HDR effect on the Philips PUS8359/12 television is also not impressive. A brightness level of 280 nits is too low, resembling standard SDR more than true HDR, which is clearly evident on the five tested test cards. Additionally, the television does not impress in terms of colour gamut coverage – just 76% DCI-P3 is a result that can be considered poor, especially compared to other models in a similar price range.

OLED910 is simply an absurdly bright television for an OLED. All thanks to the new panel from LG Display, the Tandem RGB OLED, which Philips has branded as "META OLED". It is this panel that allows for over 2000 nits of brightness in films, which not long ago was completely unachievable in OLEDs. The way the television handles full-screen scenes flooded with bright light also deserves high praise. Usually, in OLEDs, brightness drops significantly, but here it remains at a great level – around 1400 nits. These values are almost reference-level, and combined with excellent colour reproduction at 99% DCI P3 and 82% BT.2020, it gives us an HDR effect that can confidently be called one of the best in the world.

The most faithful factory mode in terms of compliance with the source material turned out to be "Film," which was used in our tests. However, like other factory modes, it also had its drawbacks. Both in SDR and HDR materials, we noticed issues with white balance, where the dominance of green and red resulted in a yellowish hue. This effect was particularly evident in the form of yellowed whites and unnatural skin tones. The "ColourChecker" palette test showed that each colour was shifted towards warmer tones, which affected the accuracy of colour reproduction. A key aspect of the image is also contrast and brightness, which can be assessed by analysing the gamma charts and the EOTF curve. In the gamma chart, we observed significant deviations – both excessively high values that caused loss of detail in the shadows and excessively low values, which led to a drastic drop in contrast. Compared to gamma, the EOTF curve performed better, only slightly brightening the image, which had a less negative impact on overall quality.

Unfortunately, when it comes to colour reproduction straight out of the box, the Filmmaker mode on the OLED910 really falls short. The television overemphasises the blue colour and at times it looks almost like a shop mode. It gives the impression that the manufacturer hasn't quite calibrated the device properly. The result is that colours appear unnatural, and the overall look resembles a slightly exaggerated display from a store showcase. HDR content looks much better, where apart from a slight loss of detail in blacks, there’s hardly anything to complain about. The problem is that in everyday viewing, it’s actually SDR materials that matter the most – and on the OLED910, they just look poor and significantly deviate from what we would expect from a television of this class.

Philips, in both its cheaper and more expensive models, offers a wide range of tools for image calibration. We used them to improve the quality of the displayed image, although it was not as straightforward as it might seem. We managed to adjust the white balance, improve the gamma, and fine-tune the EOTF curve; however, despite these efforts, the deltaE errors remained at a very high level. The main causes were limited coverage of the DCI-P3 palette and low maximum brightness, which significantly affected the final outcome. While the overall presentation is much improved, the design features of the television did not allow us to achieve spectacular results.

Fortunately, it quickly turned out that it wasn't the panel causing the problems, but the way Philips factory-tuned the OLED910. After calibration, the television showcased its full potential, and only then could we see what the new panels from LG Display were truly capable of. We primarily corrected the white balance and brightness characteristics, successfully taming the excessive blue and giving the image a natural look. The final effect can be described as excellent. Errors on the Color Checker palette rarely exceeded a value of 3, which in practice means an image close to ideal and colours presented in line with the creators' intent. In SDR content, the effect was stunning, and in HDR, the improvement was even more noticeable – gradients became cleaner, and colours fuller and more accurate. After calibration, the OLED910 transformed from a disappointing television into equipment that can be confidently referred to as reference-grade in terms of colour accuracy.

In this paragraph, we'll take a look at two functionalities. We'll once again examine the function responsible for tonal transitions, but we'll also check how the television handles image scaling. The option responsible for smooth gradation is called "Distortion Reduction". As we've established, it does a pretty good job of smoothing out inconsistencies. However, we must point out two things: we are unable to enable it for HDR content, and it blurs details in films.

The television being tested cannot boast the best image scaling. There is a noticeable overall blurriness in the image, but worse still, it blurs details. This is particularly evident on the branches and the model's hair. A characteristic white halo around the figures is also visible.

The previously visible colour connections can be largely mitigated thanks to a feature called "distortion reduction." Similar to the OLED820, it’s best to set it to medium level, as it then provides quite decent results – smoothing unwanted tonal transitions while not taking away too many details from the image. Although at times the effect may be a bit too aggressive, in everyday viewing, this function can be considered useful.

When it comes to image scaling, the OLED910 performs really well. The test material with the model showcased a characteristic soft look typical of Philips – at times almost too soft – but at any moment this can be adjusted with the sharpness slider to tailor the image to your own preferences. It’s also a plus that the television has no issues with overscan, which still occurs in some competitors' models. It’s a minor detail, but it’s pleasing as it means that all content, even the oldest, is displayed as it should be.

Philips PUS8359 is not the best choice for watching sports. The lack of even basic motion smoothing features means that the picture in dynamic scenes isn't sharp enough. Despite using an IPS panel (43 and 55'), which theoretically should provide better clarity than VA panel variants, there’s no noticeable improvement in terms of motion blur. In photos of fast movement, it’s clear that the figure of the little green man is distinctly blurry, indicating that the TV struggles to maintain sharpness in dynamic shots.

OLED910 is a TV with a refresh rate of 144 Hz. It’s a bit of a shame that Philips didn’t opt for 165 Hz, as we know that the matrix used in it is capable of that. On the other hand, such a bonus will mainly benefit PC gamers, as for everyday use, the most important thing is the 120 Hz refresh rate, which is fully sufficient. Combined with the advantages of the OLED matrix – lightning-fast pixel response times and the absence of motion blur, the picture is impeccably sharp and fast, even in dynamic action scenes. The traditional motion smoother from Philips called “Motion Style” also deserves praise. We can easily adjust it to our own preferences: the “Smoothness” slider is for movies and allows you to choose between a more “framey,” cinematic character and a smooth, theatrical image. Meanwhile, the “Motion Blur Reduction” slider is intended for sports; here, it’s worth setting it to the maximum value so that the image is clear and sharp during very fast shots.

In terms of console compatibility, Philips PUS8359 is mainly suitable for casual gamers. Although the TV is equipped with an HDMI 2.0 port, it offers features such as Automatic Low Latency Mode (ALLM), Variable Refresh Rate (VRR), and Game Bar. ALLM automatically switches the TV to low-latency mode, making quicker reactions during gaming easier, while VRR smoothly adjusts the refresh rate, eliminating screen tearing issues. The Game Bar provides quick access to game settings and ongoing parameter monitoring; however, in our opinion, it performs worse compared to competitors' solutions.

However, more demanding gamers may feel disappointed. Philips PUS8359 does not support advanced HDR formats in games or higher refresh rates, which is due to the use of a 60 Hz panel. These shortcomings limit the TV’s ability to deliver smooth and detailed experiences during fast-paced, dynamic gameplay.

The OLED910 is fantastic for gaming. It supports 144 Hz, so if someone has a powerful PC, they'll easily make the most of that potential. For consoles, the most important thing is still 120 Hz, and everything works smoothly here. It has VRR, an automatic game mode, and even Dolby Vision in games along with HGiG mode, so we pretty much get a full package of gaming features. Philips also added a Game Bar, which is like a quick menu that shows basic information and allows you to enable a few handy features. It might not look as modern as the competition, but it works and does its job. The only downside is the number of HDMI 2.1 ports. There are only two, which can be quite disappointing in this class of television. If someone connects two consoles and something extra to the eARC - like a soundbar (which doesn't really make sense in this model, but more on that in the sound section), they'll have to do a bit more figuring around. Other than that, though, the OLED910 has everything we expect from a gaming TV.