Philips PUS8359 (IPS) vs Hisense U7S Pro

The quality of the HDR effect on the Philips PUS8359/12 television is also not impressive. A brightness level of 280 nits is too low, resembling standard SDR more than true HDR, which is clearly evident on the five tested test cards. Additionally, the television does not impress in terms of colour gamut coverage – just 76% DCI-P3 is a result that can be considered poor, especially compared to other models in a similar price range.

Let's start with the fact that the U7S Pro is an impressively bright TV. In calibrated mode our test equipment recorded a staggering 2200 nits of peak brightness. That's an excellent result, especially given that this model is positioned more as a mid-range set.

As we know, peak brightness on test patterns is one thing, and real film scenes are another. Unfortunately, in real-world footage the backlight output drops noticeably. In the most demanding moments the TV can still exceed 1000 nits, which is still a great result and sits well within the HDR mastering standards for most films, but the real challenge comes from aggressively tuned local dimming algorithms. Because of them, small bright details, like stars or the moon in a night sky, are noticeably dimmed. The TV seems determined to preserve deep blacks, which is understandable, but sadly this comes at the expense of dynamic range and the overall HDR punch.

Colour reproduction is worth praising. The new U7S Pro is a QLED design that provides very wide colour gamut coverage. Unlike last year's model (U7Q Pro), this year's variant is a genuine QLED rather than a solution based on a PFS filter. As a result, colour saturation has clearly increased, and coverage of the demanding BT.2020 colour space has exceeded 81%.

The most faithful factory mode in terms of compliance with the source material turned out to be "Film," which was used in our tests. However, like other factory modes, it also had its drawbacks. Both in SDR and HDR materials, we noticed issues with white balance, where the dominance of green and red resulted in a yellowish hue. This effect was particularly evident in the form of yellowed whites and unnatural skin tones. The "ColourChecker" palette test showed that each colour was shifted towards warmer tones, which affected the accuracy of colour reproduction. A key aspect of the image is also contrast and brightness, which can be assessed by analysing the gamma charts and the EOTF curve. In the gamma chart, we observed significant deviations – both excessively high values that caused loss of detail in the shadows and excessively low values, which led to a drastic drop in contrast. Compared to gamma, the EOTF curve performed better, only slightly brightening the image, which had a less negative impact on overall quality.

We tested the U7S Pro, as we always do, in the best factory-tuned picture mode, Filmmaker Mode. The displayed colours can be judged in two ways. The most disappointing was the profile intended for SDR viewing, i.e. classic TV, YouTube and other less demanding content. The image there had a distinct yellow cast, which proved to be a direct result of an incorrectly set white balance. As our charts show, this involved a huge deficiency of the blue component, which drastically affected the overall colour temperature. You can see this clearly on the ColorChecker charts and on the colour palette graphs themselves, where most samples drifted towards yellow. Fortunately, the factory HDR mode performed much better; there the colour errors hovered around a Delta E of 3, which is a really solid result.

Philips, in both its cheaper and more expensive models, offers a wide range of tools for image calibration. We used them to improve the quality of the displayed image, although it was not as straightforward as it might seem. We managed to adjust the white balance, improve the gamma, and fine-tune the EOTF curve; however, despite these efforts, the deltaE errors remained at a very high level. The main causes were limited coverage of the DCI-P3 palette and low maximum brightness, which significantly affected the final outcome. While the overall presentation is much improved, the design features of the television did not allow us to achieve spectacular results.

We do know, however, that the company Hisense is capable of much more – as previous generations have proven – which is why we simply couldn’t leave the factory flaws of the U7S Pro model unaddressed in everyday content. As always in such cases, we had the television undergo professional calibration. The conclusions? This process brought about a colossal change. After manually adjusting the white balance and compensating for deficiencies in the blue component, the annoying yellow tint disappeared as if by magic. White became naturally clean, and skin tones gained the proper, healthy hue. Importantly, the calibration not only tamed the capricious SDR mode but also maximised the potential of the panel, reducing average colour reproduction errors to values nearly imperceptible to the human eye. The only thing we need to criticise after the whole process is the very nature of the Mini-LED backlighting and its specific interaction with the HDR signal. The aggressively tuned local dimming algorithms significantly interfere with the EOTF brightness curve. As a result, the backlighting doesn’t always work perfectly with the creator’s intent – depending on the scene being watched, the curve can noticeably run either above or below the reference, occasionally disrupting the ideal dynamic of HDR images.

In this paragraph, we'll take a look at two functionalities. We'll once again examine the function responsible for tonal transitions, but we'll also check how the television handles image scaling. The option responsible for smooth gradation is called "Distortion Reduction". As we've established, it does a pretty good job of smoothing out inconsistencies. However, we must point out two things: we are unable to enable it for HDR content, and it blurs details in films.

The television being tested cannot boast the best image scaling. There is a noticeable overall blurriness in the image, but worse still, it blurs details. This is particularly evident on the branches and the model's hair. A characteristic white halo around the figures is also visible.

The digital processing of lower-quality signals is at a very high level here, and that's all thanks to the MediaTek Pentonic 800 processor used in the U7S Pro. The upscaling itself also performs well, meaning the TV's ability to upscale lower-resolution signals to 4K is impressive. We didn't notice any unnatural, overly sharp contours on the screen, and our test image of the model simply looked attractive.

Philips PUS8359 is not the best choice for watching sports. The lack of even basic motion smoothing features means that the picture in dynamic scenes isn't sharp enough. Despite using an IPS panel (43 and 55'), which theoretically should provide better clarity than VA panel variants, there’s no noticeable improvement in terms of motion blur. In photos of fast movement, it’s clear that the figure of the little green man is distinctly blurry, indicating that the TV struggles to maintain sharpness in dynamic shots.

The Hisense U7S Pro uses a panel with a maximum refresh rate of 165 Hz at 4K, and in gaming mode it can even hit 330 Hz at Full HD. However, it's worth remembering that these top figures don't mean much in everyday use, because most content still runs at a maximum of 120 Hz (for example when playing on a console). Even so, the TV handles motion quite well and performs respectably for an LCD design.

There isn't much to fault when it comes to smoothness. In the menu you'll find a motion smoothing feature called "Motion Enhancement", which hides two sliders: blur reduction and judder reduction. They let you manually tune the smoothing, which works well for both films and sport, effectively improving the raw TV signal.

In terms of console compatibility, Philips PUS8359 is mainly suitable for casual gamers. Although the TV is equipped with an HDMI 2.0 port, it offers features such as Automatic Low Latency Mode (ALLM), Variable Refresh Rate (VRR), and Game Bar. ALLM automatically switches the TV to low-latency mode, making quicker reactions during gaming easier, while VRR smoothly adjusts the refresh rate, eliminating screen tearing issues. The Game Bar provides quick access to game settings and ongoing parameter monitoring; however, in our opinion, it performs worse compared to competitors' solutions.

However, more demanding gamers may feel disappointed. Philips PUS8359 does not support advanced HDR formats in games or higher refresh rates, which is due to the use of a 60 Hz panel. These shortcomings limit the TV’s ability to deliver smooth and detailed experiences during fast-paced, dynamic gameplay.

If you're planning to connect a console or PC to the U7S Pro, you'll be more than pleased – this TV is great gear for gamers. Hisense hasn't held back, featuring 4 HDMI 2.1 ports with full bandwidth of 48 Gbps. So you don't have to juggle cables, as each port will handle the full suite of features. We have an automatic game mode (ALLM) and VRR, which operates over a wide range from 48 Hz to a whopping 330 Hz. Of course, that 330 Hz is currently just a gimmick for owners of powerful PCs, as consoles will cap at 120 Hz, but it's good to have that headroom for the future. The Game Bar also works really well when gaming. It's a handy menu bar for gamers, where you can quickly change the picture mode, turn on a crosshair in the middle of the screen, and even switch the display aspect ratio to ultra-wide, which PC simulation fans will appreciate. The only downside worth noting is the incorrect implementation of the HGiG format in games. The issue is that the TV ignores instructions from the console regarding the image generated in HDR10 and constantly butts in, trying to "enhance" the image in its own way. This makes proper HDR configuration in the console menu (where brightness is set on the logo/checkerboard) a bit more challenging.